Problem with VPN connection from a connection shared cable modem

Similar Questions

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Problem with VPN connection via a wireless card broadband Verizon Cisco VPN air

  I can't access any device on my network via RDP or applications via the host file - forwarded servers from my 64 bit Windows 7 laptop using wireless broadband Verizon and customer VPN Cisco 64 bit 5.0.7.290. I can connect easily via a LAN wired connection from home using the same laptop computer and client VPN and RDP.

  The VPN client connects to the server VPN (easy VPN on Cisco 2821 router) on the broadband wireless connection (I can see it in the GPMC on the router) but it will pass no data. I can't ping anything in the field, or external IP address. When I try to ping the laptop, it drops off the VPN (completed peer connection).

  The laptop is a Dell M4500 running Windows 7 Ultimate 64 bit OS. The VPN client is stated, rev 5.0.7.290. The card internal wireless broadband is a QualCom 5620 (EV-DO-HSPA) system (Gobi 2).

  What must I do to get this configuration to perform and log as does the wired connection?

  Tim Carlisle

  The Systems Manager

  Post edited by: Timothy Carlisle recently I discovered that the Cisco 64 bit client VPN running on my Dell Precision M6500 (Windows 7 64-bit OS) was able to connect properly using the WiFi on my iPhone 4S (Verizon Wireless). It will also connect when attached to the laptop via a USB cable. Once I discovered this, I was then able to do the same thing on the laptop that spawned this discussion, by attachment for Blackberry "BOLD" from the boss after the download and installation of a new Verizon Wireless Access Manager utility that has allowed to select the device (Blackberry) for installation.  I think that enabled us to bypass the wireless cards Gobi2 on two laptops and the factory installed Dell Connection Manager software which was not compatible with the Cisco VPN 64 bit client software. As much as I fear here, this new method (hotspot of Smartphone and attachment) is the way to go for us and has solved all the problems of connectivity distance for us. Thank you to all who have contributed to this discussion.   Tim Carlisle

  The Solution to the debate has been captured in this Document: -.

  https://supportforums.Cisco.com/docs/doc-18721

  We fought with the same question for quite awhile before finding that there seems to be a default setting in the Verizon Access Manager software that plays well with the Cisco Client.

  In VZAccess Manager, select Options | Preferences.  Connectivity options, the default setting for "NDIS Mode - connect manually" was chosen.  Change this option to "Modem Mode - connect manually" seems to have completely addressed the issue.  We can now connect to the WWAN, establish a Cisco VPN session and have connectivity.

  

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Is a message "cannot find server" a problem with Internet connectivity or something else?

  Original title: Net question?

  When I get a message "cannot find server", is this a problem with internet connectivity or something else?  MSN and explore will be not open.  Thank you.

  Hi Aziz,.

  The Cable Guy came and installed a new modem and the new thicker cable.  So far so good.  Thanks for your reply.

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Problem with "vpn sysopt connection permit.

  Hi all

  I would like to ask you for advice with "vpn sysopt connection permit". I have a problem with by-pass-access list (acl) in the INSIDE interface. As I understand it and I'm going to use this command, there is no need to especialy allow traffic in the access list for the INSIDE and I can control the filter-vpn traffic. But in my case it's quite the opposite, I want particularly to this INTERIOR acl traffi. When I allow this traffic inside acl L2L tunnel rises, hollow traffic flow vpn-fltr ane acl that everything is OK. But when I do not allow that this traffic is inside of the rule with Deny statement in acl INSIDE block traffic and tunnel goes ever upward. Part of the configuraciton which you can view below.

  Please let me know if I'm wrong, or what I did wrong?

  Thank you

  Karel

  PHA-FW01 # view worm | Worm Inc

  Cisco Adaptive Security Appliance Software Version 4,0000 1

  PHA-FW01 # display ru all sys

  No timewait sysopt connection

  Sysopt connection tcpmss 1380

  Sysopt connection tcpmss minimum 0

  Sysopt connection permit VPN

  Sysopt connection VPN-reclassify

  No sysopt preserve-vpn-stream connection

  no RADIUS secret ignore sysopt

  No inside sysopt noproxyarp

  No EXT-VLAN20 sysopt noproxyarp

  No EXT-WIFI-VLAN30 sysopt noproxyarp

  No OUTSIDE sysopt noproxyarp

  PHA-FW01 # display the id of the object-group ALGOTECH

  object-group network ALGOTECH

  object-network 10.10.22.0 255.255.255.0

  host of the object-Network 172.16.15.11

  PHA-FW01 # show running-config id of the object VLAN20

  network of the VLAN20 object

  subnet 10.1.2.0 255.255.255.0

  L2L_to_ALGOTECH list extended access permitted ip object object-group VLAN20 ALGOTECH

  extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

  Note EXT-VLAN20 of access list =.

  access list EXT-VLAN20 allowed extended ip object VLAN20 ALGOTECH #why object-group must be the rule here?

  access list EXT-VLAN20 extended permitted udp object VLAN20 object-group OUT-DNS-SERVERS eq field

  EXT-VLAN20 allowed extended VLAN20 object VPN-USERS ip access list

  EXT-VLAN20 extended access list permit ip object VLAN20 OPENVPN-SASPO object-group

  EXT-VLAN20 allowed extended object VLAN10 VLAN20 ip access list

  deny access list extended VLAN20 EXT ip no matter what LOCAL NETS of object-group paper

  EXT-VLAN20 allowed extended icmp access list no echo

  access list EXT-VLAN20 allowed extended object-group SERVICE VLAN20 object VLAN20 everything

  EXT-VLAN20 extended access list deny ip any any newspaper

  extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

  GROUP_POLICY-91 group policy. X 41. X.12 internal

  GROUP_POLICY-91 group policy. X 41. X.12 attributes

  value of VPN-filter ACL-ALGOTECH

  Ikev1 VPN-tunnel-Protocol

  tunnel-group 91.X41. X.12 type ipsec-l2l

  tunnel-group 91.X41. X.12 General attributes

  Group Policy - by default-GROUP_POLICY-91. X 41. X.12

  tunnel-group 91.X41. X.12 ipsec-attributes

  IKEv1 pre-shared-key *.

  PHA-FW01 # show running-config nat

  NAT (EXT-VLAN20, outdoors) static source VLAN20 VLAN20 static destination ALGOTECH ALGOTECH non-proxy-arp-search to itinerary

  network of the VLAN20 object

  dynamic NAT interface (EXT-VLAN20, outdoors)

  group-access to the INTERIOR in the interface inside

  Access-group interface VLAN20 EXT EXT-VLAN20

  Hello

  The command "sysopt connection permit-vpn" is the default setting and it applies only to bypass ACL interface to the interface that ends the VPN. It would be connected to the external network interface. This custom has no effect on the other interfaces ACL interface.

  So if you initiate or need to open connections from your local network to remote network through the VPN L2L connection then you will need to allow this traffic on your LAN interface ACL networks.

  If the situation was that only the remote end has launched connections to your network then 'sysopt permit vpn connection' would allow their connections around the external interfaces ACL. If If you have a VPN configured ACL filter, I think that the traffic will always accompany against this ACL.

  Here are the ASA reference section to order custom "sysopt"

  http://www.Cisco.com/en/us/docs/security/ASA/command-reference/S21.html#wp1567918

  -Jouni

• problems with wireless connection.i have hp Pavilion dv6700

  I have a hp pavillion laptop with windows vista home premium dv6707. the wireless program is antheros. my router is netgear wnr1000. I don't have internet connection when the ethernet cable is PLUGGED. When I try to connect without cable. I turn on the wireless button. This one is blue (on) and orange (off). nothings so bad at this. made wireless signal discover my internet at home and connect to the router, but here's the problem, IT WONT CONNECT FROM THE ROUTER to the INTERNET. the network and sharing card see the computer that connects with a green line to the network not identified. BUT THEN A RED (X) IN THE NETWORK IN THE WORLD OF THE INTERNET. I click on the (x) to solve the problem, but it is not always correct it. tried to reset the router, address. even tried to disconnect the computer power and the router for 30 minutes. SO WHAT'S THE PROBLEM IN MY COMPUTER? all my drivers/programs/and windows are updated...

  I KNOW THAT THE WIRELESS WORKS WELL BECAUSE WE HAVE AN ANOTHER HP LAPTOP THAT HAS NO PROBLEM CONNECTING TO THE SAME ROUTER.

  Hello:

  I recommend that you check your version of the driver for your Atheros wireless network adapter.

  This is the latest version of HP: 9.20 (March 4, 2011)

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  If all goes well, that will solve connection problems, that you face.

  Paul

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Fast WRV200 with VPN connection

  I have a WRV200, the latest firmware 1.0.39, I used to be able to connect using Linksys VPN fast running.  Nothing has changed on the router, and I tried the two latest versions of quick VPN software.  The WRV200 is configured with an internal network of 192.135.xxx.xxx address.  When I connect via the quick VPN, it goes through all the procedures of activation, and I know that I am communicating with the router.  Happens to step network review, and I start to get the message across - remote gateway not responding do not, I want to wait.  If I say yes, it doesn't connect, if I say no, it will stop.  Please help - the only documentation I can find Cisco on this issue, is that the internal IP address is identical to the address that I am trying to connect - that is not.  I connect from an internal ip address of 172.xxx.xxx.xxx.  Thank you.

  Good afternoon

  It is a problem with traffic being blocked or altered PORT500.  Try to run a scan of port of GRC.com (Shields UP) and see if the traffic is blocked.  Be sure to plug directly into the local ISP (no router) connection and then disable the firewall to get a real test.

  Here is the link to the program, you need to run.

  www.GRC.com

  If the test does not work for you, then I would recommend that you call the HWC to 866-606-1866 support, they can test at the hearing to see if the connection works at their end.

  Have a nice day :)