Problem with VPN connection via a wireless card broadband Verizon Cisco VPN air

Similar Questions

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

  My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

  If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

  This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

  See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Is a message "cannot find server" a problem with Internet connectivity or something else?

  Original title: Net question?

  When I get a message "cannot find server", is this a problem with internet connectivity or something else?  MSN and explore will be not open.  Thank you.

  Hi Aziz,.

  The Cable Guy came and installed a new modem and the new thicker cable.  So far so good.  Thanks for your reply.

• I have problems with my monthly payment of credit card on an individual basis, an annual plan

  I have problems with my monthly payment of credit card on an individual basis, an annual plan

  Please contact support:

  https://helpx.Adobe.com/in/contact.html?step=CCSN_membership-account-payment_account-Setti ngs_stillNeedHelp

  Concerning

  Megha Rawat

• Satellite L645 - problem with Internet connectivity Wireless 'limited access '.

  Hi all

  I recently bought a Satellite L645 laptop, however, there is a big problem. Whenever I connect to a wireless network, it will connect in a minute, he removes the connections and said "limited access", he could return by being connected but then back with limited access, so. However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, it is a defective material? software? is there something I can do? Help, please...

  Thank you.

  Hello

  Here the material is ok.
  You must disable for the Wlan to save energy.
  You can do it in 7 QL power management.
  In addition, go to-WLan card-> properties > Device Manager
  You will find a named tab to save energy. You should uncheck the option here that allows the computer turn off the Wlan device to save energy.

• Problem with VPN connection from a connection shared cable modem

  Couple of my users on a remote site share a modem cable connection using a Linksys 4 port router. They connect to the main campus using VPN. When the two try to connect via VPN to the only main campus can connect at the same time. We have VPN 3015 concentrator on the main campus and the user is authenticated on our active directory. The machines of users has windows XP pro and use Microsoft VPN to connect. Anyone encountered this before? No solution/work around?

  Thank you.

  -Nik

  I suspect that the problem is to do with NAT / PAT - if only a customer wants to create a VPN session to the 3015, NAT is used, but if several clients go through your Linksys router, then you are using PAT, that requires NAT t (nat transparency), see the following URL for more information:- http://support.microsoft.com/default.aspx?scid=kb;en-us;818043

  Rowan