FTP with WRT160N router wireless problem

Similar Questions

• Problem with wag160N router wireless

  Hi all. Sorry for the typos etc I am new in the forum :-). Please, if the subject has moved to another subforum do it.

  So, here's the problem: last week, I bought the WAG160N wireless-N adsl2 + modem router (version 2) and yestreday I formatted my laptop 2, so today I decided to install a new one.

  I work 2 hours on it now, but still I can't find a solution. I started with the first cd, as required by the guide. Everything works well until the installation wizard step that attempts to connect to the router. At this point, he's looking for 5 minutes and then he said that he is not able to communicate with the router and wonder to check the connection again. I connected everything as it should (the gray wire of telephone jack to the socket of the router that says DSL, cable - ethernet - yellow of Gate 1 of the router ethernet for the laptop and then the AC/DC to the router and power.) I click next to the installation wizard, then he said to the power on the router... I do it and it checks then 5 minutes and again, he says that can't find it and tell me to double check and the story goes like this. I made 6 - 7 times but nothing. I also used the netwotk magical Wizard that was installed to fix the problem (because it recognizes that there is connection problem), but is not able to set in! What should I do? The ISP said that they don't sell Linksys products for their stores (I do not know the ISPS work on other countries, here they sell routers, adsl packs ect in their store) so they can't provide me with support. Can someone help me? Its the first time I use a linksys for me product and I don't know how to install it without the cd.

  I use windows vista pre sp2 on two laptops.

  I must also say that I have no problem with the ethernet connection the baudtec my ISP gave in the pack, that I bought when I activated my ADSL (2 years ago). IM connected with it now to view the topic.

  Sorry for my bad English and im sore right now that I can't think of what other info you might need, post and I will answer you.

  Thx for reading.

  Hello

  Connect your device directly to your pc via ethernet cable.

  Try to find the ip address of your device using the arp - a command

  Try to ping your router/adsl with address (192.168.1.1) ip of the device. u should get a response, if no response then in your pc check the LAN connection properties and enable DHCP.

  If you get always no response to ping the device, try and set an ip address in the range (192.168.1.1 or whatever your ip devices). Now, try to configure the device to cd Wizard help.

  Correct me if im wrong.

  Concerning

• WRT160N router wireless and speed Test

  Hello

  I was wondering if someone could help me.  I've just changed in the old Netgear G router to a router cisco Linksys N.  When I'm connected wireless sitting next to the modem and the router of my speed test shows more than 20 on the download, but when I go up a floor in the House it drops at least 2 on the download.  I thought that this router was supposed to expand the range and allow more devices to connect wireless taken less bandwidth.  Is there something I can do to improve the speed in addition to spending my router wireless on the main floor where is most of the navigation on the internet?

  Hahahaha WOW no no not the router to the modem worked!  I went from 1.5 on 15 on downloading downloading when I had about one foot apart from each other!  Awesome.  I have not been very high over the years!

• Windows XP and Belkin router wireless problems with error WZC871122

  original title: error wzc871122

  I have Windows xp, it worked very well. I have a router belkin on my computer, not knowing what I was doing I tried to install a belkin wireless I do not know why but I really messed up things. He wanted to even pick up my internet with out going me and loading everytime now. It says that I have something else control my internet connection, I tried everything what he tells me to do. I need help badly this is my work computer and I am lost as what to do.

  Hello

  What is the accurate and complete error message that you receive when you try to connect to the internet?

  Perform control and restoration of the system.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• problem in connetion with my router wireless.

  I have a gateway verizon westell router model 7500 and whenever I try to connect using my computer vista laptop it ask username, password and domain to logon on the XP computer all he asks is the network key and I type in and it works, but not on vista

  Hello

  The laptop is probably configured to use the domain at work network.

  If it's the work laptop talk to the working population.

  If it's your portable private and you do not need it for network domain.

  Reconfigure the laptop to the network group.

  http://www.ezlan.NET/Win7/net_name.jpg

  * The screen says shoot Win 7, it's the same for Vista.

  Jack, MVP-Networking. WWW.EZLAN.NET

• Connectivity with printer Epson wireless problems.

  Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

  See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

  Get help to solve the problems of printer on your Mac - Apple Support

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

• Windows fax with modem/router wireless - HELP

  How can I add the free FAX from Windows program that comes with my netbook windows7?  I have a Siemens Gigaset Smartbox 604 wireless modem/router, but the choices are: 1) an internal modem, 2) an external analog modem, 3) a fax through the system administrator server.  What should I do? (Please answer ASAP)

  Fax from a computer, you must have an analog modem installed, internal or external.
   
  Reason: the fax machine at the other end is connected to a regular analog telephone line, not cable or a DSL line.
   
  Welcome to the Windows 7 Compatibility Center: section analogous modem...
   
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/Browse.aspx?type=hardware&category=networking&subcategory=modems
   

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Http, https, ftp with error code 12007 problems.

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  Restore the system to factory settings.

  Even though I know you love clean and keep all your installed applications to configure how they are and without having to restore your documents/photos/music/emails/contacts/bookmarks and others of your last backup - but the truth is that if you're having this much of the problems already - virus/malware that attacks you and infested/infected you probably had friends and probably did permanent damage.

  You can try to do a cleanse to get to a point where you can save some extra stuff.  Some of them you may need to use another computer to download stuff on and then transfer it on this machine.  At the end of the day - is the only way to be sure you're 100% 'good to go' has restoring factory.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Printing with Macbook Photosmart wireless problem

  I'm not sure if anyone can help, Im a beginner and not very technical so be sweet/patient.

  I bought a HP Photosmart B110, that allows to print wirelessly to a network for my son who just went to College. It has a Macbook and all seemed well with the implementation and test pages printed with all the "Passes" while trying to find the printer on the network no printer showed. I added manually the printer even if the instructions have not really cover how to do this with a variety of menu options such as the LPD, HPJet and intellectual property. I went down the road to intellectual property and were able to get a test page to print, but whenever I try to print a document or scan something I get an error despite initially seeming fine. To do this, what you expect on the first ' print page 1, Page 2, etc. ", but a yellow triangle appears on the printer icon and a message" network host 172.xx.xx.xx is busy will retry in 20 seconds...» 30 dry etc."the Mac can see the printer on the network of the United Utilities to print all come showing the use of ink etc (and as mentioned printed the test page) but I'm really stuck on why I can't get a document to print, can someone point me in the right direction please.

  I do not large companies such as universities allow individuals to add devices to their network, such as printers.  If they allow to connect, it may be that they do not manage the data circulating on the printer.

  In addition, it is a bit dangerous to add a printer to a vast network that anyone can print on it at any time.

  I recommend this printer connected to the computer via USB.

• Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

  NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

  A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

  Anyone has the same problem?

  After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

• Encryption advice please WRT160N router/gateway/modem wireless

  I would like clarification on security and encryption please.

  I have a WRT160N router/gateway/modem wireless with WPA security is enabled.  I have a wired office with LELA installed and a wireless laptop.  A key is required when connecting the laptop but on page properties in LELA, it says "wireless encryption - no ' is this extra encryption in addition to the security theWPA. WH n I try to enable it, LELA asks the password admin but after entering that does nothing (except once again ask!)  What I am doing wrong?

  Thank you

  That your network is already reached, but him dosent software LELA display you something on your safety. This means that the LELA was not able to properly synchronize with the router and its wireless settings. So in this case, you do not have to worry about this, if you want you can uninstall and reinstall the LELA software on your computer, that might solve the problem. Or of another Complitely uninstall LELA software from your computer.

• Compatibility of the Netgear33 with HP2000 portable wireless router

  Anyone know if the Netgear33 wireless router is compatible with the HP2000 laptop with AMD E1-1200 processor?

  bighunk2167 wrote:
  

  Anyone know if the Netgear33 wireless router is compatible with the HP2000 laptop with AMD E1-1200 processor?

  Hello

  You should be able to connect to any router with Notepad. The router transmits a wireless signal to certain frequency 2.4 GHz or 5 GHz, so you must have a wireless card that supports these frequencies. The CPU of the laptop is not important. The most important component for wireless is the wireless card. Almost all wireless cards supports at least 2.4 GHz so also that each router works. This means that the laptop is compatible with the router. However, before you buy a router to do some research and buy a good. I suggest buying this one: http://www.netgear.co.uk/home/products/wirelessrouters/ultimate-performance/WNDR4500.aspx

  I use this one: http://www.asus.com/Networking/RTN66U/

  I had mobile phones, tablets and laptops connected to the router and not at all with any device problems. The asus router has two separate wireless networks on 5 GHz and 2.4 GHz so you have less devices on each network instead of all devices on the same network as on most routers. There is also a network of comments, which means that there may be three different networks on the router.

• Wireless - problem with the integration of MAC printing

  Hello world.

  Just bought a Macbook pro and can't seem to recognize my printer.

  Network devices:

  -Router Belkin WLAN

  -MFP HP Laserjet CM1312 - with HP 2101nw Wireless G (printing and scanning even works fine without thread!)

  -Acer laptop with XP Home (used to implement the 2101 wireless)

  -Acer Netbook with XP Home (later added to the network, no problem with printing, Setup a 5 min)

  Antivirus software: Avira Premium Security Suite on both XP

  Encryption WPA - PSK, mac filtering.

  The Macbook connect to internet, but nothing happens when I try to print. I tried to stop the argument that Windows is sometimes initially. Frustrating experience with the Mac to date.

  Can anyone help?

  We have found the solution:

  The HP 2101 nw G wireless driver must be installed (we had to try the installation twice).

  There is no 10.6 driver available on the HP site, but we tried the driver available however and to operate. Printing works perfectly well, we have simply not tried scanning so far (I think that it won't work), but the first step is done.

  Would be nice if HP could not work on the drivers updated to 10.6.

• Problems with WRT160N and Xbox 360 - please help

  Hello

  I recently bought a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes about 10 minutes to find a game then that in the Hall. I didn't put in the door or disconnected from my profile, there's just a lot of time. It says that my NAT type is open. I've isolated the problem is the router because if I plug in an ethernet cable from the 360 to the DSL modem I find games instantly. I examined the port forwarding and open ports on the 360 and specifically for modern warfare 2 and it was actually my NAT type go as strict, ironic. I have spent 5 hours trying to mess with this and can't seem to make it work right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.

  As your ISP is a provider DSL, most providers DSL has setup their modem in DHCP Mode, so your Modem acts like a router. So, right now, your Setup is NAT behind NAT. So if you try to open the Ports on your Linksys router it does not work as your Modem Hangs only ports.

  So the best way to work is to convert your Modem in Bridge Mode and it will solve all your problems.

• ARE remote with Apple Airport Extreme router wireless

  Hi all! I'm controlling my DA5800 STR using the Remote ES app but neither my iOS device sees the receiver OR my Sony Android Tablet S. So I figure it must be the network set up. I use a cable modem Motorola connected to an Apple Airport Extreme via an ethernet cable. The receiver is connected to the router, as shown in the manual.

  I'm doing something wrong here?

  Thanks in advance for any help!

  Hello Sandiegodom,

  Please check the network settings on the receiver ARE and confirm that the 'external control' is active, as well as the "relief network" that will allow the application ARE the 'waking up' the unit from standby mode.

  Also check that your phone is connected to the same wireless network, and IP addresses of the phone and the receiver are in the same subnet / IP Range. UpNp must also be enabled in the settings of the router.

  If you have verifed that these settings are correct, then the question is perhaps with the router where it does not send data to the local discovery of uPnP network devices. A simple power reset or resetting the router will sometimes force the router to send back data and should fix the problem if that is the case.