Problem with wireless keyboard with Smart TV 32RL958

Similar Questions

• Problem with smart updates using the WiFi, modem OK

  I started having problems with my WiFi on my Toshiba Satellite laptop.

  I can not access any program Smart Update - Windows, Norton, Spydoctor, inheritance etc..

  These Smart Update programs work very well if I'm connected to Dial-up but not wireless.

  I checked my Norton Firewall settings - doesn't seem to be an indication of a problem here.
  I disabled my firewall program - no change.
  I tried the drivers updated - no change.
  I uninstalled the other software spy/advertising programs and checked my registry - no change.

  My Internet is fine - I can always check email and browse websites - just the Smart Update function seems to be affected.

  I am running Vista and have updated and installed all the files system through my modem connection. I use Norton 360.

  Any suggestions?

  Concerning

  Lisa

  Hello

  The wireless internet connection seems to be ok if you can access the Web sites.
  So I think that the problem must be installed software or application.

  You use Norton 360?
  Although I know this software could affect the internet connection.
  See this Symantec support page:
  http://www.Symantec.com/Norton/support/selectproduct_ts.jsp

  There are some frequently asked questions about various issues with Vista, and Norton 360.

• Problem with Smart TV 32l4333dg

  Hello! I have a problem with my Toshiba Smart TV. I have a Lenovo Z50-70 with Windows 10 laptop. And I want to connect to my laptop to TV through Miracast screen. And the problem is, when you connect through Miracast, the TV's display: connected. Please wait or something like that, and then my laptop screen and a television screen became black. Is there a solution for this problem?

  have you checked the settings of your screen in Windows?

• When I run the disk check to HP Support Assistant I find problems with smart control

  Hello

  My first question is this:

  When checking the disk i run assistant hp support I find smart check question so I said that to help defragment the disk in the defrtagmentation details I find everything to analyze if it's 10% or more then defragment now.

  but when I analyzed what I found 5%.

  What should I do to get rid of the smart check number?

  and my 2nd question is as follws:

  I have hp Pavilion dv6 2138ca laptop and windows 7 64-bit. I have problem with recovery manager that is built in hp and editor is cyberlink, he said that this program will not reinstall software not or the windows operating system.

  When I try to reinstall synaptics touchpad by reinstallation of hardware driver, getting the list of factory installed drivers. and it ends correctly and restart, once again, I see the same situation as it was before reinstalling.

  kindly help me by giving the valid link through which I can download the Recovery Manager validates windows 7 64 bit or offering a solution for this problem.

  Thank you

  Original title: maintenance

  Given that most of your problems is related to HP, it is best to contact the HP support:

  http://support.HP.com/

  To defragnment, you should have little empty space. Try running disk clean in the disc you have questions first, then defragnment.

• Problem with smart connector

  Hi all

  I use my iPad Pro for a while now with the smart connector. Today, however, I noticed that the Smart keyboard did not respond to my entry and I kept getting the error message "This accessory is not supported by this device."

  When took a glance t the smart connector on my iPad I noticed some discoloration, almost as if it was burned. Can someone please help me understand how or why this might have happened? He never fell into the water or something else besides.

  Ill put a picture below. Thanks in advance.

  

  Hello. When electrical contacts carry the current, they may collect certain chemicals from the atmosphere. This does not mean that your air is bad, it happens everywhere. Try to clean the contacts gently. Be sure to check each on the keyboard too.

• communication problem with smart cameras

  Hello
  I am currently using VBAI 2010 with my smart camera and for the exchange of variables I use the function CNVCreateWriter to contact CVI 2010. It works fine when I'm in the configuration interface. I can use and modify all the variables with no problems.

  But when I switch to the control interface I can't modify variables more. By using the CNVCreateWriter function, I get the error message: RUN-TIME ERROR NO FATALE: "Camera_Api.c", line 130, col 14, 0x0000107C thread id: CNVCreateWriter function: (is-6345 return value [0xffffe737]). Cannot complete the operation within the specified time

  Someone know why it works in the configuration interface, but not in control in the real world interface?

  by the way: I can't use VBAI 2011 right now because we do not yet have a license for it

  Thanks in advance
  Oliver

  In configuration mode, things run slower on the smart camera because synchronize us execution with the update of Windows information on execution of State step, etc. When you run in inspection mode, it runs as fast as possible, so it may not be as many processor available time to process access requests to your application of C variables. Is the acquisition of your inspection triggered images or go faster the smart camera can possibly go (i.e. not triggered immediate mode)? If you're in free run mode, what happens if you change to wait next... This can give the processor a little more time to update the variables requests while he's waiting for the image to be acquired. Another way to test this theory would be to put one step behind in your inspection and see if it works (starting with 100ms and if it works, check out how small you can do).

  Something that could also help is to define the variables on your host machine and in VBAI a variable of network that binds to the variables defined on your PC. In this way, the variable engine shared on RT doesn't have to manage the updates from your PC, as well as updates of VBAI, as well as the execution of the inspection as soon as possible, and your C application should not have problems to access the variables on the same machine. This means that your PC needs to be up and running when your control is running on the smart camera or there is time-out errors to access variables... but this may be good for your application. Here is a nice document that speaks in depth of shared variables.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4679

  Another option could be to use TCP, series, Ethernet/IP, or some other variable VBAI read/write Protocol.

  Hope this helps,

  Brad

• See 5.1.2 problem with smart cards - reader to not see Office.

  Hi all

  We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

  The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

  Can what tools or newspapers we use side view or VMware to solve this problem?

  To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

  If need more information please ask and I will be happy to provide it.

  Thanks in advance.

  Right, we got to the bottom of it... and I am kicking myself!

  There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

  GRRRR!

• Problems with smart sharpening in Photoshop CC 14.2

  When I opened the smart sharpening filter, the hand symbol appears and Photoshop does nothing more. I must close the program with Ctrl - Alt - Delete. All other filters work correctly. I also removed and installed Photoshop CC again, but the problems remain the same.

  Can someone advise?

  Cordially Piebe

  Try resetting your Photoshop preferences when Photoshop Act one of the first thing you try before reinstalling resets your preference they also survive a reinstall, the problem should be in them a relocation will always have the same problem.

• Problems with smart sharpen

  I installed Photoshop CC.  When I opened the sharpness, I don't see the same features available as what appears in the promo you for Photoshop CC?

  Stan, I think that currently you use Photoshop CS6 CC CC PS is not yet launched. It will be available next month. So, you will get all the new features like the sharpness, with PS CC only, not with the PS CS6 that too when CC is launched next month.

  Hope that clarifies your doubt.

• Windows 7 problem with Kodak scanner i2420 - software Smarttouch

  Hello, someone had a problem with this kind of scan? On my desktop, there is a problem with smart touch, whenever I scan I have to restart or relog into a computer one then try again... Sometimes it works for a few hours, but sometimes I scan 1 or 2 pages and then stops scanning... The driver must have the connection, because there the scannner is a green arrow for connections... My computer is a HP and windos 7 Pro is instaled. I have checked the event viewer, but found nothing... I disabled the antivirus protection, but the problem is he stil... I know that this is not the right forum, I don't end protected by a kind of kodak support forum or something, maybe someone faced this problem?

  Thank you for your answer.e

  Hello

  Yes, you are right that this is not the right forum to ask about Scanner Kodak. If you were not able to find any support for Kodak forum so here are two links that might help you to achieve them and find answers to your questions.

  For the KODAK consumer product support

  Kodak FAQ

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• problem with the Microsoft Wireless Optical Desktop 700 v2 keyboard

  I have a problem when I installed windows xp 64-bit operation. is that it is compatible with the version of xp 64-bit operating...

  Hello

  1. What is the exact problem you are facing with Microsoft Wireless Optical Desktop 700 v2 keyboard?

  Microsoft Wireless Optical Desktop 700 v2 keyboard is compatible with Windows 7 (64-bit).

  See the link below for more information.

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Microsoft%20Wireless%20Optical%20Desktop%20700%20v2%20Keyboard&v=Microsoft&uid=M7A-00001&l=en-US&pf=1&pi=6&os=64-bit

  If you are facing problems of inadequacy of the response, then you can check the link below to fix the problem.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

• Problems with Win 7 Professional 64-bit Microsoft wireless keyboard

  I've been successfully running Windows 7 Professional 64 bit on my desk since last October.  So far, I had been using a Microsoft Wireless Comfort 1 keyboard. 0 and Microsoft optical mouse 2.0 with no issues whatsoever, another that he had got very old and shabby and all the letters had disappeared from the keyboard.  Then I myself treated then for a keyboard Microsoft wireless Comfort keyboard 5000 and 5000, the mouse, sold as a set.

  I installed, downloaded the 64-bit drivers updated for Win 7, etc, etc.  The mouse worked perfectly, but the keyboard was nothing else into trouble.  It starts fine but then after about five or ten minutes of work, start some keys not typing and I have to wait a few seconds for him to fend and catch up.  He then sporadically to this.  Re-booting does not seem to make a big difference.  Exchanging the small dongle USB around various ports seems to have an effect slightly but not sustainable.  Remove and reinstall the drivers also seems to have an effect slightly but not sustainable.

  I think that it's something in the config or the drivers between Win 7 and the keyboard, as I tried two of these keyboards and both do the same thing, so it's not a faulty keyboard.  I also switched out to another computer also running Win 7 Professional, 64-bit, and it comes up with that one as well.

  In the end, I got back to the shabby old keyboard while the beautiful new sits on the plateau, that which is not exactly what was meant.  I tried to look through the diversity of the other questions people have had here with wireless keyboards and computers, but can not see responses that quite match my setup questions.  So, what to do next?

  For possible interference, you can watch your router Wireless N +.  Wireless N can operate at 2.4 Ghz or 5 GHz.  Most of the brands end lower base 2.4 race, which is the same as the 5000 wireless set.  If your wireless network has the option of 5 Ghz, you might want to try it.  Also if you have a cordless phone that works at 2.4 it could cause problems.  I know not many people use wireless phones these days other than cell phones, but it could be a problem as well.

• Problem with the Microsoft wireless keyboard.

  G ' Day in the community.

  I have a new Microsoft wireless keyboard with lots of keys that I do not use Windows 8.1.

  Is it possible for me a key or keys to print/type a sentence like my email address so that I don't have a program

  the key it whenever this is necessary?

  I'm sorry that I don't have, I don't use such programs.  I can tell you that AHK is safe, many experts and pros, including those from Microsoft to use it.  I don't know why Norton he scored. He could score all the EXE.

  G ' Day Shawn,.

  I tried to re-download AHK and have borne fruit.  (Could be from another site)

  It is now current OK but I can't make a simple impression of my e-mail address. The program seems to be made for the work of very complex program.

  You can refer me to someone who may be able to help me. I think I'm very close.

  Thanks Brian

• >... Problems with keyboard... should be a dot instead of a comma

  When I select a point on the keyboard the comma always appears... How can I fix this glich wireless keyboard?

  Test with another keyboard, to isolate the problem, the keyboard itself, or of the system and the iMac.