Problems connecting my printer to my laptop HP wireless

Similar Questions

• can I print from a laptop if wireless printers hooked to office without card wierless?

  I have my printer HP Deskjet hooked to my office, is there a way I can print from my laptop without wireless card?

  Thank you, you are welcome.

  Frank

• Impossible to connect the printer to the laptop with a wi - fi connection and get a message saying "print spooler does not", even though troubleshooting it says that it is fixed.

  Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?

  Original title: install a printer

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Click Start, type: services , then press on enter on your keyboard

  3. Double-click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Right click on the print spooler service, and then click Properties.

  5. On the general tab, next to startup type, make sure that automatic is selected.

  6. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Problem connecting to printer.

  Connection to the router wireless HP C6180 all in one.  Changed network address. How can I change to the new network address?  SSID?

  Hi chinagrove826,

  Follow the steps to connect the printer to your new address of network (SSID)

  To connect to the wireless network

  Follow these steps to connect the unit to your WLAN 802.11 wireless network.

• at & t u-verse, & having problems connecting my Officejet 4500 to my current wireless network

  Hello

  I just got an Officejet 4500, and I am unable to connect it to my current wireless network.  I'm AT & T U-Verse so I use 2Wire equipment.  I have a Mac Book Pro, and I'm on Mac OS X operating system 10.5.8.  When I try to connect, I get an error message saying something like "Failed to connect."

  In the past, I had problems connecting my Airport Express to 2Wire.  In order to make it work, I connected the router 2Wire and changed the WPA - PSK (TKIP) security settings and WPA2 - PSK (AES) to just WPA2 - PSK (AES).  My Airport Express was able to connect without any problems.

  Please help me to connect my Officejet 4500 to my 2Wire router.  I note also that I'm not really tech savvy so I need instructions are written in simple terms.

  Thank you in advance for your help!

  Marc-Antoine

  Tanisha Hey! Try as part of this support document: AT & T 2Wire routers: "Login failed" or "Can't find printer" Message, or cannot connect to a wireless network

  I hope this will get back you on track!

  -Sean

• Unable to connect my printer (HP Deskjet 3052 a) wireless

  original title: wireless printer

  Purchase a printer HP Deskjet 3052 has and can't get my Toshiba Satellite phone so he could work. Will not work using the USB cable or wireless. Any Advisor. Downloaded the software and also used my cd, but the computer shows it's there, but when I go to print said I need to select the printer. When I do it does not help because it does not find.

  You have perhaps confused things by trying to connect with the USB connection or wireless.

  Subsequently, I guess you have a wireless router.  What is the make and model?
  Or are you simply trying to connect wireless to the printer WITHOUT a wireless connection between your computer and the Internet (i.e. without a wireless router)?

  If you click Start > devices and printers, do you (a) see an icon for the Deskjet printer, (b) see two icons for the Deskjet printer or (c) not see some icons for the Deskjet printer?

  Assuming that the answer is (a), right-click on the icon, select "Printer properties" and click on the "Ports" tab

  By ensuring NOT to click in the list of ports, use the scroll bar on the right side so that you can see the line with the box checked.  What he does say to the title of 'Port' and 'Description'?  You will have to perhaps to click and drag on the low vertical line in the header (between the word 'Port' and 'Description') in order to make the column wide enough to view the entire entry).  Click Cancel to exit the printer properties dialog box.

  Now, go to the printer.
  Print a Network Setup page:

  1. Press the wireless button to display the wireless Menu.
  2. In the wireless Menu, select print reports.
  3. Printing reports, select the menu Configuration.

  What is reported as the IP address of the printer?

  You can also print the wireless network test report:

  1. Press the wireless button to display the wireless Menu.
  2. In the wireless Menu, select print reports.
  3. In the printing of reports, select Test Wireless.

  The manual of your printer is not an example of these two reports, so I'm not sure what will be included.  On one or the other (if there are not two), it should show the name of your wireless network.  T it?

• How can you connect a printer to a laptop without cd-rom access Tablet

  How can I connect Canon MX472 printer for a Tablet laptop without cd-rom access?

  You can download all the software here:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx472#Dr...

• How to connect a printer of mini laptop w/o a hard drive?

  I have a mini laptop that does not have a hard drive... I am trying to send a document to my printer HP Photosmart 6515... It won't work... How can I get this to work without being able to insert the disc for the printer?

  You download the drivers from the HP site... See here...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=CA&LC=en&DLC=en&product=5191794

  .. then save them on the hard disk, and then run the installation application...

  Note that you should start with the printer NOT connected and wait for the installation procedure will ask you to connect...

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• My (HP Officejet 4500 n - z G510) does not connect to my Windows Vista laptop

  Ive had problems connecting my printer to my laptop. Ive downloaded the software complete on the site and even restore my computer settings. The printer connects to the Wifi and everything, but when I try to add a printer to my network I get an error message. Ive tried to download the full software version 3 times and I still can't make it work. What I am doing wrong?

  In addition, the printer can be connected to our counter top, but we got rid of that one, so we no longer have the CD.

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

  Add the printer in this way:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• 2542 DeskJet printer to my laptop connection problems

  I recently bought a printer HP DeskJet 2542, who will replace my broken.

  All is well on the installation until where I am trying to connect my printer to my laptop, which has been frustratenly without success.

  I tried both wireless via the network and wired via a USB connection, but none work.

  After further investigation, I find that the software driver 2540 series for the connection between the PC and the printer is not yet installed, despite several attempts.

  I've repeatedly uninstalled and reinstalled the entire printer software, but even when it says that the installation is complete, it is still unable to connect the printer to my computer.

  In addition... I recently discovered that my connection to a portable printer is going through "WSD Print Device" of windows, that was invites me via Windows Update for a software update... but whenever I run it, it fails due to an error in "300073EB".

  My laptop is a Dell Inspiron N5040 Windows 7-64 bit. Only the changes that I did is to double the RAM of 4 GB to 8 GB by adding an additional memory chip.

  Any help would be greatly appreciated before that I simply returns the printer to the back.

  Well... I'm happy to announce that I finally got my printer is installed properly, and that it works correctly.

  It turns out that the problem was a registry key corrupted in the records of the registry where are stored the drivers for my printer was blocking the installation. I had to delete all the registry keys in the folder where they were stored, and then rename the folder in my folder of spool where the concerned driver files were stored "disable."

  For those who are interested: here are the relevant steps I took:

  (1) Obvously, back up your registry database first just in case where.

  (2) temporarily disable the spooler to print through the Services tool in administrative tools (click the button 'Stop' after right click on the list of the print spooler, and then click on 'Properties').

  (3) to open the Registry Editor (by typing 'regedit' on your search to start bar) and then right click on "regedit.exe" to log on as an administrator.

  (4) using the left side nested directory of the folder, scroll to that folder in the registry:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3

  (For machines Win 7 32 bit, replace "Windows x 64" with "Windows NT x 86").

  Find the subfolder under the location of the driver corrupted (in my case, "HP Deskjet 2540 series") and right click and delete it. (Note: you could also do the same to all the other driver files listed there, but you'd still have to reinstall services once you restart the system.) That's why you need this backup.)

  (5) then, get out of the Publisher of the registry, and using Windows Explorer: find this folder in your root (C:\) directory:

  C:\Windows\System32\spool\drivers\x64\3

  (This assumes that you are using Win 7-64 bit, 32 bit, replace "x 64" by "W32X86".)

  Rename the folder marked as '3' to '3.old '.

  (6) now go back and restart the print spooler by using the same procedure as 1), except by clicking the button 'start '. (If your print spooler is set to 'Automatic', however, you may ignore this process, since the reboot will automatically restart.)

  (7) Finally, reboot and reinstall your software print either by using the CD or directly on the site of HP.

  It may be simply that a previous installation of a previous printer corrupt keys enough that he was blocking the installation.

  Justice and resolution can grind slowly, but with a little investigation, it ultimately grinds. Thanks for your help... and you can consider this to be "SOLVED".

• Cannot install HP Photosmart 1000, blue screen, stops install to connect USB 2 cable for laptop

  

  Unable to install printer HP Photosmart 1000 to Compaq computer laptop, blue screen appears every

  time that I connect the cable as shown, (USB no problem installing Canon printer via a cable last year)

  The HP Photosmart 1000 printer worked fine on my old computer (XP Home Edition, ed.) pc

  until this pc has developed problems so I need to install this printer HP old (but reliable) for

  my Compaq laptop. HP printer has been connected to old pc via a parallel cable.
  HP printer has not been run on a front USB cable.

  Printer: HP Photosmart 1000, S/N: MX0BG1F2GB MODEL: HP C6723A

  Laptop: Compaq Presario V6700, S/N: CNF8102WLQ, P/N: GT814AV, OS: XP Pro,.

  Two USB ports are 2.0 compatible tested with another printer, scanner and flash

  readers. The two ports operate.
  Tested on scanner (work) USB cable

  So far, I've tried several things:

  Downloaded the latest XP driver from the HP website. (3511_enu_w2k_xp_release.exe)

  (However I do not know what to do with it or where to put it so it can be found by setup.exe

  or regardless of the cd for the printer.)
  I'll never wonder where to find the driver during the installation, because of the blue screen crash

  as soon as I plug the USB cable to connect the printer to the laptop. Even when the printer is turned OFF!

  Disabled antivirus software, firewall (Windows Security Essentials)
  and Malwarebytes... without change any help.

  Ran Check Disk... everything is good.

  Tried to install software without connected printer but when I got to where I was
  asked printer a blue screen again.

  The following information on a blue screen when I plug the USB cable of
  printer for laptop during this installation step and turn on the laptop.
  Then turn the printer on. (HP as directed in instructions to install step by step).
  (also tried plugging in USB cable while the laptop is on but printer is 'no'... blue screen still

  pop up).
  --------------------------------------
  Technical information BSOD:
  Stop: 0x0000007E (0 x 0000005, 0xF7711EC5, 0xF78DA8F4, 0xF78DA5F0)
  Partmgr.sys address F7711EC5
  Base of support to F770F000
  Date stamp 48025360
  -------------------------------------

  Never used it before so I tried the XP program compatibility Wizard I forgot. That fixed the problem with the USB cord. I had downloaded the new driver for XP but didn't know how to use it and could not open or some nomatter what I tried or where I put nothing helped. Installation using old records kept asking for files, that I didn't of course. All tried, you know the drill. Install, uninstall, and more. Went back on Yahoo search (20' e time) and found a score to the HP page where I had downloaded the driver. «How to install «...»» "don't remember that being there when I got the driver downloaded. Then I followed the instructions, once more and double click on the new driver on my laptop and installed like a champ.
  I hope this helps someone else. Too tired, you miss things.

• Descjet HP 2050 all-in-one: I lost the disc to connect my printer to my computer

  I lost the disk that connects my printer to my laptop and got a new computer and need to print but I cannot connect to my new computer! How can I get a new drive or connect my laptop to my printer without spending too much money and do not buy a new printer?

  Hello

  The drive is probably obsolete now. Please download the software and drivers (for Windows) following and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL32609/al-109407-3/DJ2050_J510_1313-1.exe

  Kind regards.

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• HAVING A PROBLEM CONNECTING TO MY LAPTOP TO MY NETGEAR WIRELESS PRINT SERVER

  I HAVE AN OLD PRINT SERVER WIRELESS NETGEAR I WANT TO NOW RE CONNECT TO MY SONY VAIO LOPTOP WITH WINDOWS 7.  I CAN'T FIND THE CD OR INSTRUCTIONS TO DO AND I'VE BEEN LOOKING ONLINE BUT HAVE NOT BEEN ABLE TO GET THE ANSWER TO MY QUESTION.  MY QUESTION IS SIMPLE HOW TO CONNECT THIS SERVER TO NETGEAR WIRELESS PRINTER TO MY LAPTOP.  NOW, PLEASE KEEP IN MIND THAT I DON'T HAVE WIFI IN MY HOUSE, BUT I HAVE THE HOPSPOT ON MY CELL PHONE, WHICH IS WHAT I USE TO CONNECT TO THE INTERNET.  IF ANYONE KNOWS OR HAVE ANY SUGGESTIONS PLEASE LET ME KNOW.

  THANK YOU, TONY.

  Hello

  Please contact Microsoft Community.

  Please confirm the exact model of your printer?

  Here is the link for you to download the drivers for the same thing:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/11127/~/NETGEAR-product-compatibility-for-Microsoft-Windows-7

  Method 1: You can now go ahead and install the driver manually:

  To manually install a printer driver

  1. open devices and printers , click the Start button, and then click the start menu, click devices and printers.

  2 right-click the printer that you want to update, and then click printer properties.

  3. click on the Advanced tab.

  4. click new driverand then follow the instructions in the Wizard add printer driver.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If you can't print wireless, I first suggest you to check the firewall settings. Disable the firewall and try to print.

  Method 2: Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click on Windows Firewall.

  2. in the left pane, click turn Windows Firewall on or off.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then click OK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Method 3:

  NETWORK PRINTING CONFIGURATION PAGE
  1. press Setup, then scroll to the bottom and look for network.
  2. press OK on the network, it will give you the first option 'display network settings'.
  3. press OK on him and he will give the first option "print a network configuration page."
  4 select that and press OK. It will display the network configuration page. This document, you will be able to see the IP address of the printer

  Print a network configuration page and note the IP address of the printer.

  1 open the printer folder and check the icon of the printer with a checkmark on it and reads the ready state.
  2. right click on the printer icon and select Properties.
  3. Select the ports tab and click on Configure port and enter the same IP address and try printing that would solve the problem.

  I hope this helps.