Problems in CS3 and AS3 with embedded fonts

Similar Questions

• Problem in the field of text with embedded fonts

  Hello world!
  
  I have a problem with the textField with embedded fonts.
  I use symbols of police created in the library, and they work very well with dynamic textfields.
  If I do an input textfield with these embedded fonts the following problem occurs:
  
  If I set the initial value of the textfield (.text) what it is not equal to "" everything works fine. Can I change the text inside.
  But if I put .text of the textfield input at the start of an empty string, I can't have the cursor in the textfield, because it cannot receive the focus.
  If I turn the texfield false embeddedfonts, everything works well, but it I can't use fields and custom fonts are looking terrible.
  
  Can you tell me any solution? I would also use my custom in the input textfields fonts...

  Use setNewTextFormat() instead of setTextFormat().

• HTML "BOLD" text and regular on the Spark components with embeded fonts

  Hello!

  I took a quick glance to the textflow Flex 4 new (at least new to me).

  I use a spark textarea that is assigned to a style that uses a font embed, the problem is that when the textarea component renders the text marked in bold (using < span fontWeight = "bold" >) you lose the embeded font style.

  How to display bold text and text in the same text box using embeded fonts?

  Thanks in advance

  That's exactly what I was looking for:

  {@font-face}

  SRC:URL("..) ("/ assets/MyriadWebPro.ttf");

  fontFamily: myFont;

  embedAsCFF: true;

  }

  {@font-face}

  SRC:URL("..) /Assets/MyriadWebPro-bold.ttf");

  fontFamily: myFont;

  fontWeight: bold;

  embedAsCFF: true;

  }

  {@font-face}

  SRC:URL("..) /Assets/MyriadWebPro-italic.ttf");

  fontFamily: myFont;

  fontStyle: italic;

  embedAsCFF: true;

  }

  {.myPlainStyle}

  fontSize: 20;

  fontFamily: myFont;

  }

  {.myBoldStyle}

  fontSize: 20;

  fontFamily: myFont;

  fontWeight: bold;

  }

  {.myItalicStyle}

  fontSize: 20;

  fontFamily: myFont;

  fontStyle: italic;

  }

  so now I can put fonts on "myFont" style, and the Flash will be made to the police as a result.

  http://help.Adobe.com/en_US/Flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f5f.html

  Nice!

• Help with embedded fonts

  Hello-

  I use FlashEFF for some text effects in our online advertising banners.  I have five embedded fonts.  Now the problem is that the file size is huge because of the embedded fonts.

  Is it true that if a user doesn't have this font on their computer they will see a default font?

  I use the following fonts:

  Helvetica Neue: 65, 77 Bold Condensed, 95 Black medium

  and

  Futura LT:  "BOLD" and book

  Thank you for any advice on that.

  When you embed a font, you can only embed certain characters

  Select the textfield (dynamic or input) press the 'Embed' deselect all "ranges of characters" and type the characters to use in the section also "include these characters.

  If you use a static text, you don t need to incorporate fonts, everyone see your fonts with static text.

• Compilation slow transformation with embedding fonts

  Hi all

  In app may I embedded fonts int the font.css file and use it in my mxml app now on pressing f11 its taking too much time for compiling... is it due to embedding the fonts... ?

  Thank you

  Hello

  Here for you a nice tutorial with a video included:

  http://www.axelscript.com/2008/10/03/improving-compile-times-with-runtime-CSS/

  Apart from the generation of the SWF in the debugging of the other project (I think it is bad), you can check the setting for the other project where you have your embeded fonts, including as a module.

  Claudino Bur.

• Bullets, not to come with embedded fonts

  Hello
  
  I need to use an embedded font so that I can do a discoloration basis between state changes.
  
  When I set the htmlText of a text box control property to include a list (for example: ta.htmlText = ' point < li > 1 < /li > < li > item 2 pos.3 < /li > < li > < /li > ";) the Bullets appear very well until I have incorporate the police-, and then they disappear.)
  
  I use an external style sheet and I tried a lot of different fonts and they all have the same features.
  
  If I remove the tag '@font-face' bullets reappear.
  
  What happens here?
  
  see you soon
  
  

  Frankly, fonts and these are out of my comfort zone, but is it possible that the police you integrate has no chips? Or maybe you need the police 'fat' as well? These tips? Just throw stuff here.

• Apple and Adobe fixed the problem of ink and slides with iPad 2 Air again! It's summer is really long!

  I wonder what the updates on the issue of ink and slides with iPad 2 Air, has been set yet! It's summer is really long!

  No - Sorry to say. But it loks like a case of death for me. We use all this money on paper and pens next time I will wait 1-2 years before trying to summarize fancy gadgets / hardware from Apple / Adobe - I'll stick to Wacom for sure.

• How to open an EPS file with embedded fonts / missing without losing the appearance of these fonts?

  I often work with graphics created by others in a variety of programs (Matlab, GnuPlot,...). Sometimes, they're sending me EPS files with fonts "embedded", but when I go to open them in the CS6, I get the box alerts missing fonts / substituted.

  I also tried ' site > flatten transparency...» "as you can do with a PDF file, but I encounter an error indicating"related work that interacts with transparency can be flattened. Incorporate the work (using the links Panel) before flattening. "When I try this, I get once the box alert missing fonts / substituted.

  Someone at - he encountered the same problem and find their way around it?

  I solved the problem, so I just came back to share:

  I open the EPS file in Mac preview and it has exported to PDF.

  I then followed the procedure that I listed above to open the PDF files.

  Hope this helps everyone.

• connection problems router WRT310N and wrt54gs * with DSL

  Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

  I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

  A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

  I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

  highlights include:

  (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

  (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

  (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

  router 4) implements the home network wireless very well, but with no internet connectivity

  (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

  I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

  everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

  and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

  so... help?

  still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

  Any ideas on where I'm wrong now?

  Fixed issue...

  in the end, it's a problem between the ISP's modem and the router that they helped me understand.

  My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

  We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

• Problems to recognize and sync with the smartphone Blackberry Q10 with PC

  Thanks in advance to all.

  My BB Q10 was not reproduce my calendar and added duplicates to my contact list whenever I have synced.  So, I uninstalled their software thinking Backberry link I re-install and solve the problem.  Now my PC does not recognize the phone (I tried the 'activate fix mass storage) and BB tech support says that I need to install a "div" ("you must contact Windows to request assistance on their part on the .msi file that your computer needs.") in order to download and re - load in the BB Link software.

  I know that the problem comes from my PC because I connected the phone to my wife and it was immediately recognized, and you are prompted to install the BlackBerry link.

  I know I'm a fossil with Windows 7 and Blackberry, but any help would be appreciated. Thank you

  Like so many people, I had a nightmare trying to connect my Q10 and before that a Z10 for LINK.  After reading a lot of posts become completely disillusioned, until I found a post on the opening of the control panel/Device Manager and see if BB Q10 was listed and had a yellow triangle next to it and then try to reinstall the drivers.

  So I plugged my BB to the computer with a USB cable

  Open panel / but Device Manager there is no device listed outside the "RIM Mass Storage Device."

  What made me think...

  With the always-connected BB, on BB, I opened the settings / storage access and disabled USB mass storage.

  On the control panel / Device Manager, immediately "RIM Mass Storage Device" icon in the taskbar, a window and disappeared popped up saying "search drivers."

  This has changed then automatically to "Install drivers" and "Finish."

  In Control Panel / Device Manager a new device popped up in the area of 'No' called 'peripheral network RIM.

  Then I opened the link and it is immediately connected to my BB Q10...

  Then I went there immediately disconnect and link back to the Q10 spilled the USB Mass Storage 'OFF '.

  Certainly, there is a bug here...

  I lost several hours tinkering with this whole process, and it's a nightmare of flashing.  While this may not work for everyone, I hope this works for some of you...

• Problem of color and Lag with Flash.

  Hi, I have this very annoying problem with flash. The photos below show what I mean by the problem of the color and the video shows the offset. I have impression projected both videos to show you how to receive. I've included links for you to see the video.
  

  Without even looking at the video, I guess you can see that there is something wrong already, to compare watch them the vid.

  Link to the video (Yotube)

  

  This is the worst that a video is already well that sometimes I get a green screen instead of a video

  Link to the video (Yotube)

  The problem of Lag, I sometimes have with videos (I have recorded my screen):

  Link to the video (Yotube)

  PLEASE NOTE:

  • I tried to reinstall or uninstall the flash player (I used adobe flash uninstaller)
  • I also experienced a two errors while watching a video. the video card (Nvidia GeForce 8500 GT) gave my windows 7 (32 bit) an error and the screen flashed but I then recovered but the video does not.
  • I think there could be a problem with my monitor recent update and also the use of two screens. Maybe the graphics card just cannot be considered.
  • I checked the different browsers and the same thing happening even IE9 HTML5!

  Try turning off hardware acceleration.

• Problem of sum and group with MSSQL

  
  I'm a quiet complex query after users entry form. The result looks something like this (data simplified, useless and truncated fields)
  
  cat_id | producttext
  -------------------------------------
  1002 | Parma ham
  1013. Bordeaux
  5006 | Parma ham
  1005. Something
  1002 | Another product of Kat 1002
  
  As you can see the first and last record have the same cat_id.
  
  What I want ultimately is to know the percentages of products in the same range (1001-2000, 2001-3000...)
  and the percentage of products in the same chat (such as 1002)
  
  I do this simply by a subquery on every Beach, see attached code (query1).
  The problem is I don't need only the cat_id but is dependent on the language name.
  
  I can get it with the query as (see query2) but, it used to function if the FROM is another query. It only works if I choose a real table.
  
  All advice what to do different?
  
  What I really want ultimately is a table like this:
  
  2 1002 Fleisch
  1 1005 Beilagen, pasta, Reis, Konserven
  1 1013 great
  
  
  
  
  
  
  

  This have I done.
  I do the join in the 'base' didi - query.

  Thank you

• Help with embedding fonts

  I use Flash MX.
  
  I've read here on how to embed a font (library > new font...) but I find that the police I incorporated (supposedly) is not correctly appear on any other computer that does not have that font installed. To be precise, it's a pixel font, that I found on the web (from fonts for Flash.com) that can apparently be integrated without any problems. All the text in my film fields are dynamic.
  
  Can anyone suggest how to fix this? I'm doing something wrong? The police should there be a pixel font because of how small the letters should be.
  
  Thanks in advance.

  To embed a font for your dynamic/input text field, select the instance of text field on your scene, & click "embed" button in the property inspector.

• VS2012 problem of configuration and deployment with scatter chart

  I've recently updated one of my programs of VS2008 to VS2012.  I also had Measurement Studio 2009 and upgraded to 2013.  Since Microsoft dropped its installation and deployment in VS2012, I'm looking to use Flexera Express to create an installer.  My app contains a form that contains a scatterplot graph control that must be deployed on both Win7 and XP computers.  I tried to force the compilation to .NET framework 4.5, but that only supports XP.  I demoted the .NET framework down to 3.5.  I noticed that I had to change the references OR whenever I changed the .NET framework.  I only had references to the NationalInstruments.UI, NationalInstruments.UI.WindowsForms and NationalInstruments.Common.  When I build the installation it requires me to explicitly declare the redistributable packages.  So I chose the package OR Measurement Studio Windows Forms Support and automatically selects the load at the time of Design and common User Interface Support (dependencies I guess).  But after I create this version of installation and install it on a system, I get the following message when you attempt to initialize the scatter chart control:

  Could not load file or assembly 'NationalInstruments.UI, Version 8.9.35.246, culture = neutral, PublicKeyToken = 18cbae0f9955702a' or one of its dependencies.  The system cannot find the specified file.

  Y at - it a redistributable package I'm missing?  I tried to add the base components for the execution of Measurement Studio, but get the same error.

  I tried to use Wix, but ran out of patience, trying to figure out this one.  Any help is greatly appreciated.

  In general, when controls utilities deploying Measurement Studio you refer to this documentation for the required dependencies for the merge modules:

  http://digital.NI.com/public.nsf/allkb/6677098983C36F9086256CFE007F457A?OpenDocument

• qnx.ui.text.Label works only with embedded fonts

  I'm working on an ActionScript 3.0 for Playbook application

  I have the following code:

  [Embed(source="assets/fonts/Gilles_Handwriting.ttf", fontName='GillesHandwriting', fontStyle="normal", fontWeight="normal", embedAsCFF="false", mimeType="application/x-font")]
  public static var FontExtended:Class;
  
  var labelTextFormat:TextFormat = new TextFormat();
  labelTextFormat.color = 0x000000;
  labelTextFormat.size = 40;
  labelTextFormat.italic = false;
  labelTextFormat.font = "GillesHandwriting";
  labelTextFormat.align = TextFormatAlign.CENTER;
  
  var selectLanguage:Label = new Label();
  selectLanguage.setPosition(0, 0);
  selectLanguage.setSize(200, 44);
  selectLanguage.embedFonts = true;
  selectLanguage.textField.antiAliasType = AntiAliasType.ADVANCED;
  selectLanguage.textField.sharpness = 1;
  selectLanguage.textField.thickness = 25;
  selectLanguage.textField.gridFitType = GridFitType.PIXEL;
  selectLanguage.textField.setTextFormat(labelTextFormat);
  selectLanguage.text = "Select your language";
  addChild(selectLanguage);
  

  But I do not see the text.

  If I comment out of IncorporerPolices = true; to setTextFormat (labelTextFormat); I see the text.

  What I am doing wrong?

  I don't know if this makes any differences, but try:

  selectLanguage.format = labelTextFormat;