Problems installing Windows when installing Skype and Flipshare software

Similar Questions

• Installed Skype and my email was hacked w / I hours

  I'm not sure I want to use this program if it is not secure.

  Gmail informed me this morning that someone from Luxembourg, showing a Skype IP tried to hack my account just a few hours after I installed Skype. I had not yet USED Skype yet, with the exception of the test call.

  Is it just a freak coincidence or Skype open holes in your security?

  Don't leave me with a warm and fuzzy feeling.

  I see.
  When importing you will need to login with your Gmail Skype account so that Skype can search your Gmail contacts and see if there is Skype users. This is why he gives IP Skype, this is a normal behavior and it's done via a secure connection. Your Gmail account has not been hacked.
  
  If you have received an error message then the importation of Gmail contacts then please report this to the customer service, but if no contact has been found then if none of your Gmail contacts has linked to the Skype account Gmail address?

  If you know for sure that one of your Gmail contacts has a Skype account that is not already in your contact list, then it is also something needs to study customer service.
  
  André

  If the answer was helpful, please mark with congratulations , and if the problem is resolved you can mark it with solution. This will help other users found this answer more easily. Thanks in advance!

• problem installing Halo and Halo2

  When you try to install Halo 1, I get the error message: "inpage operation [0x000003e7] D:\redist\shfolder .exe '. The game will be installed on

  my pc. It worked before on this o/s.

  When you try to install Halo2, I can't switch to Windows Live ID. How can I fix these problems?

  My system: win. 7 Home premium

  AMD 8350

  8g 1600 RAM

  Hello

  I suggest that you try the procedure described in the article mentioned below.

  If you have problems getting a game or movie to play properly, the DirectX Diagnostic tool can help you locate the source. DirectX is a set of technologies used by many of the multimedia programs in Windows.

  Diagnosing basic problems with DirectX
  http://Windows.Microsoft.com/en-CA/Windows7/diagnosing-basic-problems-with-DirectX

  Additional information:

  The problems of the game performance
  http://Windows.Microsoft.com/en-CA/Windows/fixing-game-performance-problems#1TC=Windows-7

  Experienced graphics problems with Halo: Combat Evolved
  http://support.Microsoft.com/kb/829478/en-us

  It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• Problem installing printer HP Netbook software

  Hello

  I have an all-in-one HP Photosmart Premium C309 printer and finds it difficult to install the printer on my new netbook software.  The printer software is installed on my HP desktop computer and two laptops in the House, all of which have naturally scanners for the Setup disk can naturally be used.  However, I believe to be impossible to install the HP software on my netbook to allow me to fully use the HP print utilities.

  I tried to download the correct complete package on the HP site.  It downloads fine and extracts, but then nothing happens.  I mapped optical drives on the desktop and a laptop to try and install the software from the CD that I have, but once I clicked on the configuration file, even once, nothing happens.

  My netbook runs Windows 7 starter edition, the desktop computer running windows 7 Home premium and the laptop is running vista.

  Help, please!

  Hello DazzaBee,

  The netbook has Windows 7 starter version installed and when we install the printer software it does not install software just like in Windows Vista or Windows 7 family premium.

  It's the Starter edition limitation and not a problem with the HP software. In the Starter editions only basic printer driver is installed. In order to check in "Devices and printers" under "Control Panel" If the printer icon whether or not written.

  For analysis, you must use MS Paint or Windows Live Gallery If the printer is connected using the cable USB. Link below will guide you with scanning:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

  If the printer is networked is connected to a router, then we can scan using WebScan functionality:

  (1) open Internet Explorer or Firefox or Chrome

  (2) type the IP Address of the printer in the address bar and press ENTER.

  (3) under the "Scan" tab, click "WebScan.

  Note: We can only scan to JPEG or PDF formats.

  
  

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• Problems with Windows Live Mail send and receive e-mails

  Hello

  I am running Windows 7 Home Premium and I used Windows Live Mail 2012 (WLM) for many years without any problems, and I prefer it much to Outlook.com. I have my own personal e-mail account and three other accounts available in WLM. I can send and receive emails from three other accounts, but my own account keeps giving the error message:

  Can't send or receive messages on behalf of Clive Read.
  Server error: 4402
  Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
  Windows Live Mail error ID: 0x8DE00002

  That being said, I can actually send emails, but cannot receive them-weird!

  I spent several hours internet research solutions, including Microsoft pages, forums, etc and later of the end of "solutions" offered in 2013. Many of the suggestions I've tried, without success. I ran other controls have shown that initpki.dll is absent, but I don't know if it's possible causes and, if this is the case, my attempts to locate, re - save or download one have failed.

  My version of WLM doesn't have a "Tools" link, and I can't seem to find where the incoming and outgoing port settings. It gets really tedious, so I'd be grateful for all solutions to update to my problem and perhaps an explanation as to what may have caused it in the first place.

  Thanks in advance for your suggestions.

  Clive Read (UK)

  You are welcome and thank you for the comments

• Windows vista problems install keyboard and mouse

  I try to install windows vista ultimate on a new amd system I've built recently. The windows vista screen Boot starts well, but I can't go further with the installation because the keyboard and the mouse do not work.

  To solve the problem, I booted up with a Linux distribution and I can use the keyboard and mouse and everything works fine. Initially, I bought vista using boot camp on my Mac and the keyboard and mouse work well with vista on this configuration.
  I want to upgrade to windows 8 thereafter, but I might need to buy the whole program, rather than the update if I can't do vista works. I don't want to spend money if I can't because I'm broke. Any suggestions?

  Parameters of the BIOS of some computers have a setting "Enable USB Legacy" to allow the keyboard to work without Windows running.

  If you have PS/2 ports buy an adapter or a PS/2 keyboard. Most USB keyboards can be connected to a PS/2 port using a USB to PS/2 adapter.

• problems installing SP2 and code 80070490

  I am trying to install SP2 manually because my updates do not work.  Once I download it, it tells me that I have to install SP1 first.  According to my system, I'm already running with SP1.  Don't know what to try before you take it into the store.  Any suggestions?  I tried to uninstall SP1, and then reinstall it, but it is not in the list of updates to uninstall.  I don't know what is happening.

  I also get the error code 80070490 when I try to check the updates.  The Help Center tells me to do something with the disc, but as usual, I do not have a.  It came not with my computer, even if the program doesn't, do not know why they do not give you the drive.  I was wondering if there was a way to get one if my computer is under the age of one year, or what I have to do.  I want to try to solve this problem on mine before you take it to the store.  I absolutely don't want to pay $ 300 to $ 400 for a disk when I already have the product.

  Hi DDJohnson,

  Thanks for the response on the Microsoft answers Community Forums.

  Just outside chances run SFC and see if any corruption appears.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program

  Generates in Windows Vista cbs.log

  http://support.Microsoft.com/kb/928228

  Try new preparation tool running system update.

  Once after correcting these errors try to download the standalone package and then try to install

  Download the stand-alone update: x 64 | x 86

  Hope the above information helps.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Install Skype and client not answer and late development - Win7

  Whenever I open the installation of Skype or the client program, it takes about 15 minutes to even begin to answer. After that, I managed to work through the installer, the customer takes on another 40 mins tom pass the login, after this point it continues to accuse an extremely.

  I've had no problems before and have not installed all the weird programs recently.

  I tried also to disable ads via the internet options, uninstall, delete temp and appdata folders.

  Looking for tanks next to "format your pc."

  Thanks for your help, it seemed that all I had to do was run CCleaner and that fixed the IE and Skype with her.

• Problems installing SP1 and SP2

  My update watch folder I installed SP1, but I continue to receive update messages telling me to install SP1. When I try, I get a message that the installation has failed. When I try to install SP2 I get the message that I need to install SP1 first. Yet that said SP1 is shown as not being unhooked. Running Fix - it, but nothing does not change. My OS is Vista home premium and I HAV e recently re - install the operating system.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  I'm sorry to hear that you are not able to install the SP1 and SP2 on the computer.

  Try these steps and see if it helps.

  Step 1:

  Hide the SP1 update to the folder updates offered.

  Consult the following link:

  http://TechNet.Microsoft.com/en-us/magazine/ff382716.aspx

  Note: Also applies to Windows Vista.

  Step 2:

  Try to download the SP1 standalone package and install it.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  Once SP1 is installed, try to download and install SP2 from the following link and check if that helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  Hope this information helps. If you have any other questions feel free to answer in the next forum, and we would be happy to help.

• problem installing photoshop_64_ccssaa_2016 and crashed my Dreamweaver

  I try to install photoshop_64_ccssaa_2016. I just run the installation application. And checking the installation box stay here for a long time. I then interrupt the installation. Now, it crashed all my Adobe software, including Dreamweaver product. I tried to restore my system both before you install photoshop. But my Dreamweaver does not work now. I can uninstall it or reinstall. Anyone know how I should fix this problem? I need dreamweaver to do my job. Thanks in advance!

  You are not able to uninstall Dreamweaver because of some missing files. In this case, you should go for manual cleaning remove all program files Adobe and then install the product.

  Please find the following list of files and folders, you need to remove.

  Files / folders

  All files and folders in %Temp%. You will need to press windows + R on your keyboard and type %temp% to get the temp folder.

  C:\Program Files\Adobe *.

  C:\Program Files\Common Files\Adobe *.

  C:\Program Files (x 86) \Adobe*

  C:\Program Files (x 86) \Common Files\Adobe *.

  C:\ProgramData\Adobe*

  C:\Users\\AppData\Roaming\Adobe*

  C:\Users\\AppData\Roaming\com.adobe.*

  C:\Users\\AppData\Local\Adobe*

  C:\Users\\AppData\LocalLow\Adobe*

  C:\Users\\AppData\Local\VirtualStore\Program Files\Common Adobe *.

  ~ Registry keys.

  HKEY_LOCAL_MACHINE\SOFTWARE\Adobe

  HKEY_CURRENT_USER\Software\Adobe

  HKEY_CLASSES_ROOT\VirtualStore\Machine\Software\Adobe *.

  NOTE: Make sure that you only delete Adobe folders such as specified above. It will delete your Adobe saved preferences and will not delete your data. However, it is recommended that you back up your data before performing this.

  After deleting all the files above, you will be able to withdraw from Dreamweaver and reinstall it.

• PROBLEMS INSTALLING SKYPE ON BlackBerry Bold 9000 blackBerry smartphones

  
  

  In fact, you were not.

  There is no Skype for Vodafone BlackBerrys.

  If there is, please show me a link to the file that you were trying to install.

• Problems with Windows 7: Internet Explorer and black screen

  I recently took my old Acer Aspire laptop 8375 from the dead. If I remember correctly, it is from 2008 and has Windows 7 installed on it. When I try to start my PC, everything's fine until it connects to the account. Suddenly, a black screen will appear with a message saying: Internet Explorer has stopped working. I have tried different methods: looking for online solutions (did not work, window closed without results), open the Task Manager and IE (did not work), trying to open other applications didd work tho, but my google chrome didn, t work as well running. I forgot to mention, I could use my cursor on the black screen. Could someone help?

  Hello Kent,

  Thank you for your response.

  I appreciate your time.

  If the computer boots to the office, you can use the steps described in this article and check the problem with Internet Explore.
  Reference:
  What to do if Internet Explorer does not work
  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-crashes-stops-working#IE=ie-11-win-7

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Please keep us updated.

  Thank you

• problem with windows 2003 vpn servers. and xp pro clients vpn using bridge nic

  I have installed 2 guests windows 2003 on 2 laptops. both are configured with 1 CC of backend and frontend 1 nat/vpn server that has 2 interfaces, a bridge and one configured for host only.

  I configure nat on both servers windows 2003 rras and vpn services and have them connected to my local network. they are able to access internet, ping between them and other computers on the network, as well as the host systems on which they run.

  the problem is that I am not able to connect to the vpn servers remotely from inside a guest virtual machine. I wanted to try a vpn site-to site between the guests 2 windows 2003, but the operation failed.

  I then tested customer to type of a guest virtual computer pro xp vpn server. It is also a failure.

  but I discovered that if I initiate a VPN from any one of the host computer system laptop or another computer on the physical network I am able to connect to the vpn servers I have set up.

  I wish I could have these laptops to operate normally and

  time to time be able to turn on virtual machines with vpn

  servers and test as dfs things and replication active directory as if

  they were running 2 separate real-world offices. the two laptops have invited Setup for 192.168.0.0 networks with subnet mask 255.255.255.192. each host that it supposed to be running a 1 subnet for the popular virtual machine with the servers vpn/nat connect together the 2 sites.

  laptop computers are running xp pro and vista ultimate as the host systems. I'm only using the windows firewall but also tested with them disabled vpn connections. also launches the service ipsec on laptops to secure internal lan traffic, I have also tested with two guests with disabled ipsec.

  is there something I'm missing here with the installation of the vmware bridge network?

  Oh I forgot to mention, I test using pptp and ms-chap v2

  I managed to do work by unchecking the tcp/ip settings and the microsoft file sharing on the bridged NIC resaeau.

  now it works very well but who explain to me why it cannot work when you are using the same network as the host card. they all have two different ip addresses and mac addresses. but something seems to be in conflict