problem installing Halo and Halo2

Similar Questions

• problems installing SP2 and code 80070490

  I am trying to install SP2 manually because my updates do not work.  Once I download it, it tells me that I have to install SP1 first.  According to my system, I'm already running with SP1.  Don't know what to try before you take it into the store.  Any suggestions?  I tried to uninstall SP1, and then reinstall it, but it is not in the list of updates to uninstall.  I don't know what is happening.

  I also get the error code 80070490 when I try to check the updates.  The Help Center tells me to do something with the disc, but as usual, I do not have a.  It came not with my computer, even if the program doesn't, do not know why they do not give you the drive.  I was wondering if there was a way to get one if my computer is under the age of one year, or what I have to do.  I want to try to solve this problem on mine before you take it to the store.  I absolutely don't want to pay $ 300 to $ 400 for a disk when I already have the product.

  Hi DDJohnson,

  Thanks for the response on the Microsoft answers Community Forums.

  Just outside chances run SFC and see if any corruption appears.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program

  Generates in Windows Vista cbs.log

  http://support.Microsoft.com/kb/928228

  Try new preparation tool running system update.

  Once after correcting these errors try to download the standalone package and then try to install

  Download the stand-alone update: x 64 | x 86

  Hope the above information helps.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows vista problems install keyboard and mouse

  I try to install windows vista ultimate on a new amd system I've built recently. The windows vista screen Boot starts well, but I can't go further with the installation because the keyboard and the mouse do not work.

  To solve the problem, I booted up with a Linux distribution and I can use the keyboard and mouse and everything works fine. Initially, I bought vista using boot camp on my Mac and the keyboard and mouse work well with vista on this configuration.
  I want to upgrade to windows 8 thereafter, but I might need to buy the whole program, rather than the update if I can't do vista works. I don't want to spend money if I can't because I'm broke. Any suggestions?

  Parameters of the BIOS of some computers have a setting "Enable USB Legacy" to allow the keyboard to work without Windows running.

  If you have PS/2 ports buy an adapter or a PS/2 keyboard. Most USB keyboards can be connected to a PS/2 port using a USB to PS/2 adapter.

• Problem install Windows and "Status.msi".

  I have a new top of Tower HP G60-440 with Vista Home Premium.  I loaded the verion trail of the office which was provided.  I loaded the minor to my J6480 HP's printer and other software Hp Solution Center.

  Whenever I boot Windows install tries to find and install a software called "status.msi".  He is looking in my directory "c:\users\...\local\temp...". ».  It does not cancel or close without numerious attempt.

  What is it and how can it be solved?

  It seems to be a problem of HP software.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/fc920e97-956f-411e-98D2-e79a4602cacf

  Read the info on the link above.

  If necessary:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=au

  Online 24/7 support for home and individual HP products

  See you soon. Mick Murphy - Microsoft partner

• problem installing photoshop_64_ccssaa_2016 and crashed my Dreamweaver

  I try to install photoshop_64_ccssaa_2016. I just run the installation application. And checking the installation box stay here for a long time. I then interrupt the installation. Now, it crashed all my Adobe software, including Dreamweaver product. I tried to restore my system both before you install photoshop. But my Dreamweaver does not work now. I can uninstall it or reinstall. Anyone know how I should fix this problem? I need dreamweaver to do my job. Thanks in advance!

  You are not able to uninstall Dreamweaver because of some missing files. In this case, you should go for manual cleaning remove all program files Adobe and then install the product.

  Please find the following list of files and folders, you need to remove.

  Files / folders

  All files and folders in %Temp%. You will need to press windows + R on your keyboard and type %temp% to get the temp folder.

  C:\Program Files\Adobe *.

  C:\Program Files\Common Files\Adobe *.

  C:\Program Files (x 86) \Adobe*

  C:\Program Files (x 86) \Common Files\Adobe *.

  C:\ProgramData\Adobe*

  C:\Users\\AppData\Roaming\Adobe*

  C:\Users\\AppData\Roaming\com.adobe.*

  C:\Users\\AppData\Local\Adobe*

  C:\Users\\AppData\LocalLow\Adobe*

  C:\Users\\AppData\Local\VirtualStore\Program Files\Common Adobe *.

  ~ Registry keys.

  HKEY_LOCAL_MACHINE\SOFTWARE\Adobe

  HKEY_CURRENT_USER\Software\Adobe

  HKEY_CLASSES_ROOT\VirtualStore\Machine\Software\Adobe *.

  NOTE: Make sure that you only delete Adobe folders such as specified above. It will delete your Adobe saved preferences and will not delete your data. However, it is recommended that you back up your data before performing this.

  After deleting all the files above, you will be able to withdraw from Dreamweaver and reinstall it.

• Problems installing SP1 and SP2

  My update watch folder I installed SP1, but I continue to receive update messages telling me to install SP1. When I try, I get a message that the installation has failed. When I try to install SP2 I get the message that I need to install SP1 first. Yet that said SP1 is shown as not being unhooked. Running Fix - it, but nothing does not change. My OS is Vista home premium and I HAV e recently re - install the operating system.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  I'm sorry to hear that you are not able to install the SP1 and SP2 on the computer.

  Try these steps and see if it helps.

  Step 1:

  Hide the SP1 update to the folder updates offered.

  Consult the following link:

  http://TechNet.Microsoft.com/en-us/magazine/ff382716.aspx

  Note: Also applies to Windows Vista.

  Step 2:

  Try to download the SP1 standalone package and install it.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  Once SP1 is installed, try to download and install SP2 from the following link and check if that helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  Hope this information helps. If you have any other questions feel free to answer in the next forum, and we would be happy to help.

• Impossible to install Bootcamp and partition problem

  Hello guys, I really need your help. I can't install Windows more Bootcamp partition.

  So I read a lot of articles on the problem of the partition but it seems that I can not solve the problem at all and I think my problem is very critical. Here's how things all turned out badly:

  -J' tried to update to OS X version 10.11.5 from the Mac App Store.

  -After restart my Macbook, I got the message error "OS X could not be installed on your computer...". ».

  -J' tried to find a solution and I found this:https://support.apple.com/en-us/HT203482

  -J' did what the site Web told me, that I used the disk utility to resize the partition to the Mac (at the time I had Windows 10 Bootcamp on my Mac). So the thing has helped, I was able to update OS X 10.11.5. After that, I had resized the partition of the Mac to its normal size. (I was very careful not to touch anything else like Bootcamp)

  ' - The day after I restarted my Mac to use Windows, but since the splash screen, I saw only 'Macintosh HD', I booted in OS X and is passed as a parameter to indicate my boot under BOOTCAMP drive, after restarting black screen said: "no boot device... »

  -I went on the web and find all the solutions and I formatted the BOOTCAMP partition and deleted all his data, now my Bootcamp Assistant said: "the startup disk cannot be partitioned or restored to a single partition.". I tried to install Windows 7 on USB, I chose Bootcamp (score 4), but now I have this: "Windows cannot be installed to this disk. the selected disk is a MBR partition table. On EFI systems, windows can be installed on disks GPT THAT MBR cannot support... »

  Now I can't find any way to install back my Windows on the partition, I read on the internet that OS X sees that the GPT partition Windows considers MRB. Here are a few photos can help:

  

  My Macbook HDD has 3 parts: Macintosh HD (use for OS X), Bootcamp (used for the installation of Windows) and DATA (use to store large data)

  Hi Jason Dang,.

  Thank you for using communities of Apple Support. What a great way to try to get this problem resolved on your own! The best resolution would be to format the drive outside the Bootcamp utility. Your drive must be formatted using the recovery partition. Once you format the drive, you will be able to use the wizard Boot Camp re partition and re install Windows. Please try the link below and select "erase a disc and reinstall OS X.

  How to reinstall OS X on your Mac

  Restore your Mac to factory settings should get your Windows successfully installed.

  Have a great day.

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?

• Which solves the problem of MDM_Util.exe? I tried installing updated and it persists % $@.

  I am trying to install a Netgear router and when I click the installer, I get the MDM_Util.exe closed unexpectedly.  Please click here for the update solve the problem.  I did all the updates and it still does not work.  More whenever I have him try again, there is an another important update needs to happen - I feel like this could be a virus...

  I am trying to install a Netgear router and when I click the installer, I get the MDM_Util.exe closed unexpectedly.  Please click here for the update solve the problem.

  And did you contact Netgear Support? Is there the Netgear updates available (for example, as the firmware update)?

  CF. http://forum1.netgear.com/showthread.php?t=19370

  CF. http://forum1.netgear.com/showthread.php?t=20347 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• Update installation problem - cannot install KB2656353 and KB2656370

  Failed to install KB2656353 and KB2656370 after several attempts. ??  Translated into Microsoft's fix - it routine and fixed according to them but still cannot install.

  Hello

  1. you receive an error message or error code?

  2 have what Microsoft Fixit you tried?

  3. is the question not confined with them specific updated?

  4 did you do changes on the computer before the show?

  5. who is the security software installed on the computer?

  Method 1: You can temporarily disable the firewall and the security software on the Windows XP computer and try to install the updates.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 3: You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Problem installing HP Deskjet F2280 and Windows7

  Hi people,
  I have a problem installing my printer hp deskjet F2280 all-in-one printer. Its saying its compatible on the windows 7 and custom allow to be the command "run under...". ».  This printer is only 6 months old :(
  Anyone got around this problem yet?

  Thank you

  Hello SeaCos,

  Thank you for using the Microsoft Windows Vista Forums.

  If notifies you that it is not compatible with Windows 7, you need to contact HP support to see all the drivers compatible. Are you following the steps below to set up your printer? Please let us know status. Thank you!

  http://www.HP.com/SBSO/bussupport.html

  Windows 7 install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  Click Add a printer. In the Add Printer Wizard, click Add a local printer. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

  If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional. If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.) Perform the steps in the wizard and then click Finish.

• Restart problems, error Disk Boot error, if please install disk and press a key

  Original title: problems of Reboot

  When I restart my computer it say "Disk Boot error, if please install disk and press a key:?"

  Hello

  1. you remember to make changes to the computer before this problem?

  2. have you changed the BIOS boot device?

  3. What is the brand and model of the computer?

  This could be related to:

  · Startup options is not correctly defined in the BIOS

  · A non bootable CD is in your CD player

  · You don't have any boot device

  · You have installed a new hard drive

  · The hard drive is not properly connected

  · Your system files have been infected

  Change the boot order in the CMOS (BIOS) settings so that your disc is the first in the list.

  a. restart the computer.
  b. new computers often display a startup (or boot) menu. In the start menu, choose "Configuration of the BIOS," or "BIOS settings," or something similar.

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DELETE, ESC) or a combination of keys immediately after you
  turn on your computer but before Windows starts. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer again.

  c. the BIOS configuration screen appears. On the BIOS Setup screen, choose the option called "Boot order" or something similar. Startup command settings can also be saved
  under "Advanced settings" or something similar.
  d. Select your drive from DVD or USB drive as first boot device.
  e. restart your computer and see if the problem is resolved.

  
  BIOS WARNING: modification of the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.