Problems of network VMWare 9 speed

Similar Questions

• Problems with networking

  Hello

  We have a vmware infrastructure still in version 4 on a HP Blade Center works for a few years without problem.

  However, 2 days ago, we noticed the VMS has been very slow. We have reduced the problem of network connectivity, even if we do not find what is the problem.

  On VMS, if we try to ping another server (inside or outside the confines of the blade), it loses a large number of pings. Ping by the ESX host everything well without loss of ping.

  This happens on all esx servers 4.

  On the other servers blades on the same box (blades not with hypervisor installed), we don't see any problems, and they work very well. The affected only blades are the esx servers.

  No changes were made to the environment that could have an impact on the virtualization servers, nor there was any firmware update, patch or sw in this infrastructure.

  Do you have any suggestions on what this could be and how to perform troubleshooting on this issue?

  Thank you and best regards,

  Hi all

  Thank you for your help. We have already identified the problem. It was a problem with the switches on the blade case. Raise them solved the problem.

  Kind regards

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired. "Please wait a few minutes by trying again.

  Original title: store Windows and Microsoft Services does not

  I tried for awhile to update to Windows 8.1, and whenever I open the Windows store, I get the following message:

  "We could not connect to the Bank.  This could have happened due to a server problem or network connection has expired.  Please wait a few minutes by try again. »

  I looked through a large number of subjects and lived simple solutions, like check that the time is correctly synchronized and clear the memory cache to store.

  Just today, I found another solution posted, to make my computer trusts.  To do this, I had to connect my local account to my microsoft account, I tried to do, only to be met with the following message:

  "Sorry, we could not connect to the Microsoft services right now.  If the problem persists, look for "referee" in the start screen. »

  I did the research you suggested, and nothing came.  When I watched this show online, I found the idea of creating a new user account, which has been received with the same question.  The suggestion of other involved running a diagnostic tool for Microsoft account who investigated the issue, which has turned a few 'problems found', namely an Unfixed 'Problems with the strategy of Microsoft account' and a Detected "Rootcauses found and created newspapers", but this is not what that means, or how to solve.

  In addition, some of the suggested solutions were an antivirus program, but I do not have a third part of the installed antivirus program.

  Any help is appreciated, because I really want to solve this problem.

  I had this problem too. Here is how I fixed it in about 3 seconds.

  1.) by scanning in the right and type "WSReset.exe" (without the quotes) in the search bar.

  2.) click on the application that appears. It will look like a Windows Store icon.

  BAM... done. I hope this helps!

• We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422).

  OT: Problems with Microsoft Store for a computer in windows 8.

  It keeps saying we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422). Please help me thanks

  Hello

  Try the steps mentioned here and see if that helps:

  http://www.kapilarya.com/fix-modern-apps-not-working-after-upgrading-to-Windows-8-1

  If the problem persists, try to create a new user account.

  Hope this helps, good luck :)

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired

  Original title: Store of Windows 8

  I got the message to upgrade to windows 8.1. When click to upgrade it shows following message.

  "We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please, wait a few minutes and try again"

  The error message appeared as early as February 2014, so I can't update windows 8.1 or go to store.

  Hi Rikas,

  You might face this problem if the proxy connections are enabled.  Cache clearing Windows Store is also known to solve the problem.

  Kindly, follow these methods and check if that helps.

  Method 1: Follow these steps to disable the proxy settings.

  a. open Internet Explorer to the desktop.

  "(b) click on the" "Tools button", then click on "Internet Options".

  "c. click on the" "connections ' tab and then click on"parameters LAN '.

  d. uncheck use 'Proxy Server '. .

  "e. click on" "Apply" and "okay ' to save the changes.

  In addition, run the troubleshooter app and check.

  This tool can automatically identify and fix some issues with the store.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  
  Method 2:
  Reset Windows store the cache and check if that helps.

  a. press on 'Windows and R ' key to open the Run dialog box. "

  b. Type "'WSReset.exe ' and press enter."

  In addition, follow the suggestions of this blog.
  Unable to connect to the Windows store (Windows, 8.1, 8, RT and Pro)

  http://blogs.technet.com/b/dennis_schnell/archive/2013/10/26/cannot-connect-to-Windows-store-Windows-8-1-8-RT-and-Pro.aspx

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Problemas com Rede - VMWare Server 2.0.2

  Estou com um problema great. Ocorre com todas as minhas maquinas

  tolls. Use a VMWare Server 2.0.2 atualizei back versão

  that o problema resolveria mas continued ocorrendo.

  APOs

  some tempo em execução a rede simplesmente Plaça loses a conexao

  pingar para, to EU acts e reativar volta, to EU access as

  of voltar e alterar Propriedades para a mesma option anterior, e can

  Sair volta a pingar e volta o status of rede usually. Have any

  training of o driver driver of Rede da placa virtual? O ESXi pode

  resolver? A logging ESXi e paga OU gratuita?

  Guga, is o seu laptop roda Windows 7 e sober ele você instalou VMware Server, then o pode ser o seu problema este: o VMware Server e suportado sober o Windows 7 ainda nao. Veja Manual o produto, pag. 25.

  Como alternativa, VMware Workstation ja mourned o Windows 7 o, e bem but funcionalidade excellence. But a front a VMware passed a suportar o Windows 7 no also VMware Server, como mas ele e free, nao tem a prioridade.

  VMS Made in Brazil

  PS: Please consider dar pontos has este or any poster caso seja util lhe outro.

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• problems of network with Vmware workstation 6.5.0

  version of Workstation 6.5.0 - 118166

  I have two virtual machines W2003R2 and W2008r2 in a physical host with Windows XP Edition family.

  The network configuration is in Bridge mode the two.

  No dynamic IP for both.

  Physical PC1

  W2003R2: W2008R2

  IP: 172.17.0.1 IP: 172.17.0.2

  Mask: 255.255.0.0 mask: 255.255.0.0

  No gateways.

  DNS: 172.17.0.205 DNS: 172.17.0.205

  And a virtual W2003R2 on another physical machine.

  Physics PC2

  W2003R2: (is a domain controller)

  IP: 172.17.0.205

  Mask: 255.255.0.0

  No gateways.

  DNS: 172.17.0.205

  Two physical machines have connectivity, no problem, Pc1 and PC2.

  Virtual machines have two connectivity with DC IP 172.17.0.205 and also DC for two machines, nslookups works OK.

  There is no ping between machines on the physical PC1 comments, well not exactly I have ping of W2008 in W2003 but not for W2008 W2003, there is no firewall and no antivirus, no, default configuration, I tried to uninstall W2008 and install the other W2003 and no results, so there is no problem of OS Windows.

  I'm trying to change the configuration of the network, tried to bridge, host, nat, custom, I tried vmware workstation version 6.0 and 6.5.3 and don't find any solution.

  Any ideas?

  Is there any antivirus running on the guest operating system?

  [

  | http://linuxgurus.wordpress.com]

• Problems of network running Slackware 3.5 under VMWare Player 3

  I'm trying to run an old version of Slackware (3.5) to the title of the latest version of VMWare Player. I don't have the PC that it ran on more, but I'm sure he didn't have a PCI bus (that is to say, the NIC was ISA), and I noticed that this version of Slackware is an order of 'lspci' (when I tried to force installation of the vmware tools). The core of Slackware seems to work very well, I can't get the network to configure. I guess this is because VMWare player will not emulate an ISA bus... is this true? I tried to play with the different options in the .vmx file, but I can't find a list of all valid options for the parameters. Does one exist?

  I don't necessarily need the network features, except that without it or vmware tools share folders, I don't know how to extract data from the guest system. I can get it via CDROM, but not on.

  Any suggestion would be appreciated.

  Hi Ben,

  This document should give you some additional information:

  • http://communities.VMware.com/docs/doc-10821

  Happy to help you.

  Kind regards.

  Franck

• RHEL7 fails to see the network on VMware Fusion 6.0.3 device / / Tags: Red Hat 7, RHEL7 Fusion, RHEL7, RHEL7, RHEL7, Networking, VMware Fusion network

  No matter what method I chose, I can't get VMware Fusion on my MBPro 6.0.3 to issue the network to RHEL7 device.

  Are there alternatives?

  Model name: MacBook Pro

  Model identifier: MacBookPro8, 1

  Processor name: Intel Core i7

  Processor speed: 2.8 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 4 MB

  Memory: 16 GB

  Boot ROM version: MBP81.0047.B27

  Version of the SCM (System): 1.68f99

  I managed to install RHEL7 on a Dell laptop, is the detection network card and even automatically configure WiFi.  It seems that with the merger I have problems with RHEL7.

  I don't think I need to download the ISO Image of the DVD for you help with this problem...

  I saw two things wrong in the .vmx config file...

  guestOS = "redhat".

  Should be...

  guestOS = "rhel6-64.

  And you miss...

  ethernet0.virtualDev = "e1000".

  The devops-rhel7 - 01.vmx.zip attachment has already been published for your convenience.

  As you can see with these changes, mainly the ethernet0.virtualDev, I was able to get an IP address from my router as shown in the picture below.

  (Click on the image to enlarge).

  

• Internet connection with a wired network card Gigabit speed limit

  Can you reach 150 speed Mbps Internet connection on a computer running Win XP SP3 and IE8 with the help of the Gigabit wired network adapter?
  What kind of drivers are required in such a case?
  Currently, I have 150 Mbps of connection, and what I get according to the speed tests is of the order of 60 Mbps with pings of 30 to 60 ms.
  My troubled wired adapter is TP-LINK Model: TG-3269-based Realtek RTL-8169SC chipset and its driver: rtnicxp.sys, v.5.649.0615.2006 (WinDDK) provided by Realtek

  The fact that your Ethernet card is theoretically capable of 1000 Mbps does not mean that everything in the path between your computer and the fiber cable (which is what your ISP based his spec 'speed' on) is capable of the same way.

  For example:

  • What type of cable you are using between the computer and the modem/router... and how long is it?  You did the cable yourself or did you buy it with the connectors already attached?  You must at least Cat 5 cable and attach the connectors yourself is not recommended, unless you have a good amount of experience doing.
  • What brand/model/version of your modem/router?  It has the latest firmware installed?

  You have a second computer that also has a Gigabit network?  If so, check the transfer speed of A computer through the router to computer B (i.e. What is the transfer speed of your LAN, completely apart from the speed of transfer between you and your ISP).  Use a stopwatch and a large file or use a utility such as LAN Speed Test.

  What TG-3269 version do you have?  The current one is V3.

  Assuming you have v.3, you appear not to have the latest version of the driver (though I doubt that's the problem).  The package labeled TG-3269_XP_beta a 5.719.0325.2009 XP driver version.  http://www.TP-link.com/en/support/download/?model=TG-3269&version=v3#tbl_a
  Finally, you may want to think about your connection setting, what is most important for XP and later versions of Windows: http://www.dslreports.com/tweaks and http://www.psc.edu/index.php/networking/641-tcp-tune

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return