Problems of networking with the new configuration

Similar Questions

• C168i: unlocked from at & t, but unable to connect to the network with the new SIM card

  I brought my c168i from the USA and I can't use it in my home country. I unlocked the phone to at & t, but it connects to the local network with the new SIM in there. It shows "not available" or "no service". What is going on??

  If you look at Australia GSM worldwide site, you will see which bands are available in your area. If the bands including the phone does not match the country you are located in the phone up with will not get service. Not all bands are available in all areas. In my view, that the phone only has GSM 850/1900 GPRS. This would mean that you get only service when GSM 850 is available that I don't see 1900 in Australia.

  Mark

  Support Forums Manager

• Problem with the new configuration of the computer

  Hello. Read some guidelines for the installation disc in a new PC and I would like to ask for your help with my setup:

  My PC is msi x99a sli + i75820k, 32 GB of ram, msi gtx970, I use the CS6 version

  The problem is with the installation of drive: Samsung 950 pro ssd 512 GB, the SSD ultra more than 256 Sandisk, Toshiba 3 to dt01aca300

  The Sandisk SSD will be my OS, programs + pagefile

  The thing is: raw material should stay on the slower toshiba or should I put it with projects and media on the fastest ssd cache?

  The default location for them being on a SATA III SSD, I just leave them in the default location on the boot drive in the users folder.  Since they regenerate if necessary there is no reason to check them, just delete the every once in a while

• Network with the new Vostro 410 problem

  I just got a new Dell Vostro 410, running XP Pro, to replace a 2400 Dimension 5 - years, which had been connected to my DSL ATT line via ethernet through a 2Wire 1800 HG. My laptop and two other offices (which is the replaced 2400) is connected through wireless cards or adapters. Three wireless computers came online immediately, get internet access and work very well.  All computers are running XP.

  The problem is that I can't access the Vostro or its USB printers through computers connected wirelessly that could print previously via the cable 2400. They do not appear and are accessible on the Vostro and the Vostro appears in the Working Group, but not belong to network on the other three.

  I tried to redo the Network Wizard, but I'm having no luck at all.

  Any suggestions would be greatly appreciated.

  Ron

  Message edited by RS2 on 09/23/2008 11:55
  
  

• Problem blackBerry Smartphones with the new version of Windows Live Messenger 2.5.30

  I HAVE A BB 8900; WEEKEND LAST I DECIDE TO UPGRADE TO THE NEW VERSION OF WL MESSENGER 2.5.30; AFTER THE UPGRADE, I CAN'T CONNECT TO THE SERVER OF WLM. ALWAYS APPEAR THE ERROR MESSAGE FOLLOWING: "CONNECTION (65) ERROR: PROBLEM RECEIVING DATA FROM TEH SERVER.»

  Finally I could connect with Windows Live Messenger 2.5.30

  I got a solution the following steps:

  (1) options > advance Options > Applications. Remove the WLM 2.5.30 application

  (2) options > advance Options > Service Boks: remove all files associated with WLM (any version)

  (3) options > advance Options > host Routing Table. Register now

  (4) batt Pull Reboot

  (5) reinstall WLM 2.5.30

  (6) options > advance Options > host Routing Table. Register now

  That's all!

  Thank you all to help me.

• Satellite C660-28 d - problem "Load driver" with the new HARD drive

  I have a Toshiba Satellite C660-28 t.

  The hard drive has failed. I called Toshiba Support who send me a replacement.

  However in the meantime I was going to put in my spare hard drive and do a fresh install of another operating system that I have a spare for (Win 7) key.

  However, I can't past the screen "Loading Drivers" as the laptop came with driver disks.
  I can't find the drivers on the Toshiba site (I tried some drivers intel which I thought were good, but he says they were not signed and all comes down to the loading screen drivers).

  I have made the recovery discs, but obviously can not use them on the new hard drive as it doesn't have the recovery partition.

  Any ideas on where I can get the proper drivers from?

  Thank you

  > I made the recovery discs, but obviously can not use them on the new hard drive as it doesn't have the recovery partition.

  If you have a recovery disk using Toshiba preinstalled recovery media creator tool, you just have to boot from that disk to begin the installation.

  More info: all the recovery disk for Toshiba Europe, models of laptops can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Compatibility problem of motherboard with the new GPU [h8-1214]

  I tried to upgrade my GPU [gtx 560] to a [ti gtx 780] and it seems that when I install my end card higher than my computer [h-8 1214] won't go past the splash screen.

  My OS is windows 7 64 bit.

  I already did to try to fix things:

  -Power supply is adequate and bronze certified (750w)

  -Update my BIOS

  -try a different card (gtx 770) video

  At this point I am sure that it is the motherboard having problems, I would like to know if there is a work around or should I just get a new motherboard.

  Sianmors, welcome to the forum.

  You are right.  It's a motherboard problem.  Your new video card requires the UEFI Firmware in the motherboard, instead of the standard BIOS.  HP didn't start using UEFI until mid-October 2012.

  I suggest that you contact the maufacturer Technical Support to see if they have a VBIOS update that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Problems of network with the Portege R500

  I reinstalled a R500 (actually downgraded from VB to XPP) and after loading all that I get a dynamic IP from the DHCP server and I can ping computers on the same local network... but I get no response when ping any device on WAN and, of course, I can't access the internet.

  Any ideas of what it is that the cause of the problem? I get an IP address on the wired NETWORK adapter and the wireless network adapter...

  Suggestions that is very appreciated...

  I'll try to update the BIOS (I've updated everything)

  Oh and Yes... I am a technician experienced in IT (15 + years of professional experience) ;)

  See you soon!

  EDIT / /.
  The update of the BIOS nothing... was already v1.60...

  Thanks for the clarification!
  Good bye

• photosmart all-in-one problems 5200 impression with the new Dell running windows 8.1

  have a photosmart C5280 All-in-one I used with a computer that is running windows XP, it worked fine. Bought a new computer running windows 8.1, printer don't print very well at all. It prints the page after page, one or two lines of hyroglifics tile view deleted I canceled the print document to stop using paper. I uninstalled the printer software and reinstalled from website of HP software to run with windows 8.1 still does not work.

  I think it made me print again. I had to uninstall the full features software and loaded the driver only. I could not full features software to load completely, then I loaded the driver only and it seems to work okay thanks for the help.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

  This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

  Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.

• Problem with the new update

  Any browser looks graphically unstable and content is empty with the new update, is it just me or is just the update which is unstable?

  Hello

  Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select Options Preferences on Mac or Linux, or Windows.

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• I had to change my password online gmail accnt and now I get a msg "configuration could not be verified" when I try to connect with the new password.

  I had to change my password for the gmail online account. I can access my account with the new password through my browser and my cell phone. But when I try to connect to my gmail account in Thunderbird
  by using the new password, I get a "Configuration could not be verified" error message.
  Any help would be appreciated.
  Thank you
  Brendan

  It looks like you are trying to create a new account. What are you doing exactly?

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos