Problems of quality of 3D interpolation

Similar Questions

• Satellite L50-B943 - Audio problem Jack Quality

  So, I recently used this laptop and every time I plug in my headphones quality goes big and hard at something just plain bad.

  I tried to use my headphones on other devices and they work fine.
  This is the first time I met this problem as well.

  Your responses are much appreciated. Thank you!

  Hello

  The laptop supports DTS® sound.
  Its DTS Studio is a suite of enrichment premium sound available on some Toshiba laptops, which provides a sound immersive surround, outstanding bass reproduction, improved dialogue and smart volume Equalization and maximization of all multimedia content.

  But to get the right sound, that you must change the DTS from the inside to the outside.
  Please be aware of this!

• Step and repeat the problem of quality (Alt + Shift + Ctrl + T)

  Hello

  I have a weird problem when I do the step "and repeat" - all copies I have lower than his previous quality... Look at the second picture where the arrow tip, it has a thin line around the darker areas

  

  Here is an example of step and repeat, you can see the first (1) original copy and the last (12), which has much less quality.

  

  Happy to hear any ideas

  It is as expected because the transformation causes the resampling and degradation, accumulate.

  Try to use dynamic objects instead of pixelated straight layers.

• problems with quality vs. file size in export to YouTube 1080 p

  Hello

  I used to use NCH videopad as a Publisher began. He had shocking performance but gives really good quality and small size files.

  That is to say, I could export 1080 p 30 min video of good quality for YouTube in less than 2 GB file size, but Premiere Elements can

  Get anywhere near the same quality, even at 4 GB.

  So what I need is someone to tell me the parameters I need.

  Currently I export the shadowplay film recorded in 1080 60 fps 50Mbits (according to shadowplay).

  If I export to AVCH (whatever) with YouTube Widescreen HD - set it to match the source, I can't

  get a good quality. I even put the target at 20 and the other at 18 and it is still grainy quality and file sizes

  4 GB. The only way I can get the same quality I received of Videopad is with a 7 GB file into elements.

  Today I tried to export a video (30 minutes) and all day trying to find a good setting, and

  each parameter gets me grainy footage.

  If someone can you please just give me the detailed settings, I need (without the jargon) please.

  The problem is with file sizes as what he deletes my additions to my half a string because

  limits on usage of my data.

  Thank you

  NeonsStyle

  corn

  I think that you need to remove temporarily and advanced then refreshed. Then go through the following.

  The first link in your last message does not, but that a second was full of information (really great).

  If this is supposed to represent the output of VideoPad, here's the story.

  1. you have an AVCHD.mp4 file MPEG2.mpg is not. The file is 1920 x 1080 @ a progressive frame.

  2. our goal is progressive rate - variable and not constant, noted that the 3 frames rate in playback of video properties...

  minimum frame rate = 10,000 frames per second

  frame rate = 29,888 frames per second

  maximum frame rate = 30,000 images per second

  First Elements not managed well with the video recorded with a variable rather than a constant rate. Symptoms range from Premiere Elements of audio desynchronization to not being able to import the video at all. The typical remedy is to take video in the free program of brake hand to get the H.264.mp4 with constant frame rate (29.97) model. Then, you take the export of brake hand in Premiere Elements project using first elements add Media/files and folders.

  https://handbrake.fr/

  Also note that VideoPad product export with a low flow, i.e. 7759 Kbps (equivalent to 7.7 Mbps). You were trying for 36 / 50 Mbps in the export of Premiere Elements. It is an explanation of the difference in size of the files that run you in your comparisons of software.

  Since you don't seem to be involved with video MPEG2.mpg, I write what follows for information purposes... What do you do with an xml file if you used the 1080p29.97 HDTV high quality predefined with Publish + share/computer/MPEG? You should get a single file, MPEG2.mpg. If you use one of the presets whose name begins with MPEG2 (interlaced preset who is not progressive), then you will get two files, the video file and a file of information m2t.xmlses. Nothing to do with the xml file. All you want is the video file that will be MPEG2.m2t.

  Right now I'd take that video in Handbrake for 1920 x 1080p29.97, like H.264.mp4, import this file in Premiere Elements, export as a AVCHD.mp4 MP4 H.264 1920 x 1080 p 30, get a core file line with default transmission speeds and, if necessary, start to lower the bitrate to 8 Mbit / s by looking at the quality.

  Please consider.

  Thank you.

  RTA

  Add on... If you need a how tos tos for handbrake, let me know. It is quick and easy with the adjustment under video tab key.

• IPhone 4 video - problem with quality and PE v8

  Hello

  I am a new user of first element v8. I tried to load and share the video of the iPhone 4. My problem is that video input our PE is much lower quality than the original - even if I do nothing for her, just load it and share it.

  Can someone help me figure out what I'm doing wrong?

  Here's what I did:

  -created a new project with HDV 720p30 layout (which has 1280 h 720v, 29.97 frames/second, square Pixels)

  -Added a video of the iPhone 4 (33 sec)

  -static iPhone with custom export setting: frame width 1 280, frame height 720, 29.97 frame rate, square Pixels, NTSC, level 4.0

  The resulting file (.mp4) size 4 748 KB while the original file has been much more 43 727 KB.

  Thank you.

  You took a video from an iPhone, he traveled the Elements first and then put it back in the iPhone?

  I'm not sure what you're trying to accomplish, but you can go to share / Portable Device/iPhone, click on the Advanced button and adjust the level of quality.

  Version 8 is not really have a predefined project that corresponds to the release of the iPhone, so the video is going to be re-made and re-encoded between input and output. It is not a 'smart' rendering, so what fate will probably be different from what is happening.

  A better program to do this kind of editing is available for $29 Apple Quicktime Pro. Its workflow is more in line with what you're trying to do.

• White lines now appear on photos scanned after many analyses of the quality. Problem?

  Scanner large Format - Windows Vista - HP Officejet 7500 did good job with a lot of pictures but now 3 or 4 white lines appear in each of them.  Ideas?

  It may be a small amount of residue on the glass and needs to be cleaned. Check the steps in the document found here to solve the problems of quality of scan.

  Let me know how it goes.

• I AM NOT the LIVEDOCK HELP because of a quality problem with USB keyboards, you can fix it?

  I have a Xperia Arc and I bought an accessory DK10 and I try to use a USB mouse and USB keyboard with it, , but I'm not able to change the language of the USB keyboard-.

  It is a problem of QUALITY because that this limitation is not announced with the product.

  For this reason, I'M NOT to the HELP of LIVEDOCK.

  Y at - it a possiblity that solve you this problem? (for example, by using the language settings and the keyboard of the phone that will use Android)

  This will help many users who do not use U.S. English keyboards.

  I write in this forum because I could not any kind of help in the chat support or support by mail.

  At the time Android supports only English keyboard using an external keyboard, but I know that our developers are looking into this and try to add other provisions of keyboard as well.

• Quality image after export problem

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  There are several problems with your settings. The detail panel sharpening (NET ') and the noise reduction controls should only be paid in Zoom 1:1 Mode. The amount of sharpness (Gain), detail, brightness and contrast are too high. Adjustment brush sharpening (NET ') setting 100 is compensated by the noise of 100 (noise), so little local sharpening is applied. Also the moire ' and fringe 100 parameters must both be left at 0 (OFF), because they serve no purpose for the sharpening of the premises. Please try the settings below and evaluate the results in development and library modules View Zoom 1:1. If having the same problem please download the raw export to DNG on Dropbox or other image file sharing site files and I'll try to decide the issue.

  For more help and tutorials in French please look on this link: training for Lightroom, assistance and support. Adobe Photoshop Lightroom 5

  

  

• Z6100: Z6100 image problem

  Hello

  I understand that printing is not accurate especially when writing texts.

  I did a printed map and found the defective image

  

  I made the print head alignment

  and I found that all superior print head does not match the lower

  

  I don't know what to do to fix it

  Hello

  The diagnosis page is to give you an idea of where to look when you have problems of quality with the prints.

  If the prints are coming very well I will recommend you to leave it like that.

  Continue to make cleaning a work print head nozzles the focus and you will end up with a bad print head

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• HP C309g: Problems printing with photo paper and not A4 paper

  My HP 309 g perfectly print a picture on A4 paper without flaws. However, whenever it prints the exact image even on HP Premium Plus photo paper, the colors are weird - not black, but the yellow blues and roses. I removed the print head and carefully cleaned and aligned the printer nothing helps. Verification of diagnosis HP shows no failure at all. The obvious flaw must be with the photo paper, but I am not convinced that this is the real problem. Can someone help with this really weird problem please?

  Hi @Quackers,

  Welcome to the HP Forums!

  I'm happy to help with your PS C309g

  I would normally be with you that photo paper would be at fault, but as HP paper, it should be good. I realize, this may be irrelevant, but make sure that you load the face of photo paper (print side) down so that it prints on the right side of the paper.

  If you load it properly however, which I am sure you are, I suggest that you try the steps in this document to solve the problems of quality Print to the HP Photosmart Premium all-in-One Printer Series (C309) .

  Let me know how things are going for you!

  Happy holidays!

• HP C5180: Printer color problems

  I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix this... I changed the printer cartirdges... the same problem. I cleaned the print heads. several times and followed the suggestions on the tech support pages. I would not only use this printer as a black and white printer.

  Hey @TomTwist,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve print quality problems you are having with your HP Photosmart C5180 all-in-One Printer. Because you have already replaced the ink cartridges and clean the printhead several times nothing is done, there is a good chance to have a defective print head. The print head is what reads the cartridge and puts ink on the page. On your print head template system is a non-replaceable part. Therefore, should that do not pass part a replacement of the entire unit would be necessary. However, I would like to go through the following steps to conveniently solve this problem of quality.

  I won't make you run any printhead more clean. The rule is usually 2 or 3 clean makes no difference at all, don't make a fourth because when you clean the printhead system it uses ink in order to rinse the ink system. If 2 or 3 clean make no difference that you're just wasting if you run a clean more.

  Step 1: Calibrate the colors:

  1. open the printer Toolbox: HP Solution Center. This should be on the desktop of your computer.

  2. If you have more than one printer installed, be sure to select the correct printer tab in the HP Solution Center

  3. click on settings

  4. click on print settings.

  5. click on printer Toolbox.

  6. on the device Services tab, click color to calibrate, and then follow the instructions on the screen. The procedure takes about two minutes and requires two sheets of paper.

  Source: The printed colors are not colors should

  If the problem persists, please continue to the next step.

  Step 2: Align the print head:

  1. click on HP Solution Center's on your desktop

  2. click on settings.

  3. click on print settings

  4. click on printer Toolbox.

  5. on the tab Services of device the printer, Toolbox, click align the print cartridges, and then follow the instructions on the screen.

  Source: Streaks or lines in the printed Image

  Please test print once these two steps have been taken. If the issue of quality still persists, because you have already replaced your cartridges the next step would be a replacement of the entire unit.

  If you want to explore additional options available for your printer, I suggest you contact the Technical Support queue by phone.

  HP Technical Support can be reached at the: 1800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Good luck!

• B9180: B9180 printing problems

  Hello... I have a HP Photosmart Pro B9180, I use with Mac OS 10.9.5

  Everything was fine until recently printing.  I had not printed anything for a week or two. The printer was left, performing his daily, cleaning cycle.

  Then, when I was printing some photos from Lightroom, I noticed the upper left corner of each photo (with multiple photos on a page, each chaque photo photo exposed this) began with a small white block, which has transformed little by little solid. A bit like a gradient.

  When I ran the nozzle check, there were a few problems print quality in black text, and several blocks of color had the same white-> gradient of solid in them, only in the first "band".  The blocks of color affected were the first block (cyan), third (red/magenta) block, seventh block (cyan), ninth (magenta) block and 11 (black) block.  On the second row of blocks, the first three blocks all had the gradient in the upper band.

  After the execution of the printhead, routine cleaning the number maximum (seven) sometimes, things were worse. Black text was unreadable, gray and light gray (first two) tranches on the second line were practically invisible.

  The print heads are reported in "good" condition. No indication of low-ink will appear.

  Can you help me?

  Thank you!

  -Eric

  Thanks for your reply...

  I don't know if that would work, since I tried an old watch that did the trick:

  (1) turn off the printer

  (2) unplug the printer for about a minute

  (3) plug the printer back to the

  (4) re - turn on printer

  After that, everything was fine. Not sure why the printer itself would enter into this State, but a complete reset seems to have done the trick. Your suggestions can be simply part of the restart process that could do the same thing. I will remember that if this happens again.

  Thanks again!

  -Eric

• WRT110 and VoIP quality

  I have Vonage Linksys (PAP2) adapter attached to a WRT110 RangePlus Wireless Router. Firmware on the router upgraded to 1.0.05 build 3.  Incoming voice quality is clean and clear.  Outgoing voice quality is jerky. Nothing other than on the local network VoIP.  Tested late package with and without the router online.  Without router, round-trip delay (100 pings to Vonage external server on the Internet) on average less 90ms.  With WRT110 online, around tripping delay 200 ms on average.   The > 200ms delay is after you disable the SPI firewall and QoS and setting DMZ destination with the MAC address of the adapter Linksys of Vonage.

  I also tried the AT & T_Cisco MicroCell connected to router Linksys WRT110 RangePlus.  Same router, same problem.  Quality of VoIP CMF (phone Moble to MicroCell of Linksys WRT110) outgoing is choppy.

  Any suggestions?

  Try reducing the MTU value to 1300 on the configuration page of the router and the router power cycle... Now, check.

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.