Problems of resettlement HP Photosmart C5280 for Win7

Similar Questions

• Problem with the HP Photosmart C3180 for Vista printer all-in-one drivers

  Need help to reinstall my printer HP Photosmart C3180 all-in-One printer because I can not install the disk to download

  * original title - my computer went down and I had reinstalled Vista program, but my printer has not been reinstalled and I can't reload the disc to do this. I have a HP Photosmart C3180 all-in-One printer *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1146331&LC=en&cc=us&DLC=en&submit.y=5&submit.x=4&lang=en&cc=us

  Select your operating system to the above link > and then download the Drivers good > install according to the instructions from HP.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1146331&LC=en&cc=us&DLC=en&submit.y=8&submit.x=5&lang=en&cc=us

  Installation, configuration, etc. info at the link above.

  For any other questions about your printer, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=1146331&lang=en

  See you soon.

  Mick Murphy - Microsoft partner

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• Photosmart C5280: 5280 all-in-one printer front panel C does not

  I have a HP Photosmart C5280 All-in-one printer. I am able to print and scan through the software on my pc, but the buttons and the screen on my printer does not work. The screen is dead and nothing happens if I press the buttons. I lift the lid (the m crept about to change ink) for the printer start work before I can print. Please give advice on how I can solve this

  Welcome to the HP community @Anthony1707,

  I read your post on display problems you are facing your Photosmart C5280 and wanted to drop. My suggestion would be to try the steps that are in the article link below to see if they can help. If the problem persists, I think that somewhere there is an internal failure, and could then recommend contact HP directly to see what your next printer options. I'll leave their contact details below for you also.

  HP all-in-One, Fax and copy machine products - product HP off several times

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Rollers which collects the paper in my Photosmart C5280 printer make any movement.

  I have cleaned the rollers, checked the settings, changed the paper, dusted off the printer, but rolls that are supposed for the paper do not move, and the printer gives me a message 'Out of Paper' and do not print.  Any suggestions?  He is an all-in one Photosmart C5280, running on Windows XP, directly connected to the computer.

  If the entry of paper rolls do not move, then it is possible there is something stuck in it or the sensors that control are having a problem.

  * I start by remove all paper from the paper tray and check at the front and the back of the printer to make sure nothing is caught in the rollers

  * Hard Reset the printer by unplugging the unit while it is turned on, wait 30 seconds and plug it back to.

  Thus, there is a document provided by HP with the steps to resolve when a printer does not have paper in the unit.  The document can be accessed here.

  I hope this helps.

• E14 ACER: EXPIRY DATE OF CARTRIDGE IN HP PHOTOSMART C5280 ALL-IN-ONE

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL-IN-ONE PHOTOSMART C5280 HP?

  Hey @mmaxxor,

  Welcome to the Forums of HP Support!

  I understand that you are looking for a way to override the expiration date for all-in-one printer, HP Photosmart C5280 ink cartridge. I want to offer you information about expiration dates.

  Expiration dates can be reset on cartridges. But expired cartridges should work correctly in your HP Photosmart too long that the cartridges have been installed on your printer before expiry. If you bought new cartridges that have already expired they likely won't work in your printer and there is no replacement for that cartridges are expired. If this is the case, you may want to consider bringing back them to the store or speaking with our Technical Support phone queue to explore additional options.

  If you had a cartridge installed in your HP Photosmart camera and would use very well and at random, to get the message that the cartridge has not expired, you should be able to hit OK on this message and continue using the printer as per normal.

  For more information on the guarantee one couverture coverage for ink cartridges and printheads, please click on here.

  Please let me know if the information I have provided solves your problem. Good luck!

• HP Photosmart C5280 All in One printer works is not after the installation of updates

  OP: Problems with my HP Pavilion connect with my HP Photosmart C5280 All in one. Allows to work properly and after running the update something happened.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello iwasbetterbutgotoverit,

  1. do you have an update of the hardware installed on your computer?

  2. what exactly happens when you try to print from the printer?

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This automatically diagnose and fix printing problems, installation of a printer, connecting to a network printer and other related errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  As it was working fine before installing the update, I suggest that you do a system restore on your computer.
  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can visit the link to the KB Article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can use the System Restore tool to undo the system restore if it does not help.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• I cannot print to my photosmart C5280 of my laptop computer on the wireless network

  I have a Toshiba L750 running the operating system of Windows 7 32 bit and I am unable to print on my HP Photosmart C5280 printer. The printer is connected to my desktop which works on Windows 7 64 - bit OS with an ethernet cable. The printer works fine from the desktop and the laptop captures the internet wireless via the modem attached to the Office so that the network connection seems to be OK. I am also able to access the shared files on the desktop hard drive of the laptop which again seems to confirm that the network connection is fine. I tried to update the drivers concerned and all seem to be up to date. Previously, I was able to print from the laptop, but for some reason any, that he will no longer work. I have installed the printer software from the original CD supplied with the printer on the laptop to see if that would solve the issue, but nothing helped. I uninstalled from this software. I am at a loss and frustrated. I have also been through the printer Troubleshooter and Microsoft MrFIXIT, to anything will do. Someone out there of the clues as to what could be causing my problem? I might also mention that HP laptop of my son is able to print to this printer without any problems.

  Which, in my view, could have gone, it's that you used on your desktop printer sharing to allow other computers on your home network to access. Here's a video of Microsoft on how you can achieve:

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  Let me know if that solves the problem!

  See you soon!

• Photosmart C5280: a component ' to ' falling apart after the paper stuck. "

  I wanted to spring 6 pages, 2 of them when printed, then a stuck. I pulled it out, but when I tried to continue printing a stuck. This time when I pulled it out (it came out softer the usually), I found a black plastic piece down on the document reader.

  Here's an album with 4 photos of this component:

  https://drive.Google.com/folderview?ID=0B0K5k8LpitTlUDVJMnZMWGlrVXM&USP=sharing

  Please can someone tell me how to put it back in its place?

  Thank you.

  Hello @DimitrisPl,

  Welcome to the Forums of HP Support!

  I understand you have problems paper jam printing of your HP Photosmart C5280 All-in-one printer and after removing a jam you found a piece of black plastic at the bottom of the printer that needs to be reinstalled. I would like to help you to solve this problem today.

  To begin, please can I you click here for the jam troubleshooting steps. Once the support document opens please run through the Solution one, two, three, Solution solution and four Solution. This includes all sub-steps under the listed Solutions. Once we have determined that no other debris or jams are stuck in the print on your printer path, we will be able to reinstall this piece you found. Now, normally parts like this are non-replaceable. Therefore, it is not supposed to get out of the printer. However, I find in your printer which parts seems to come from a sector.  In the support document, I'm going to have run through to see the Solution three: step 1. The rear access area of your printer where the paper pick roller seems to be where will this piece of black plastic.

  

  The image is under "Figure 10' in the support document. I think that you can just cut that part into its slot. Once you have reinstalled the game, please try again to print.

  Please reply to this message with the result of your troubleshooting. Good luck!

• I haven't used my photosmart A526 for about 6 months and now it will not print

  Yesterday, I tried to print a picture of my A526. However, he did not print and there is nothing in the print queue. The A526 has not been used for about 6 months and during this period, it has been disconnected. I ran an update of Windows, but this resulted in nothing for this problem. I ran the HP Print Scan doctor and it detected that there was a problem with the driver. I tried to download the latest version of the installation software, but HP web site indicates that the driver is part of the Windows package and should be loaded automatically when the computer recognizes the printer when it is turned on. It seems that the computer is not recognizing the printer. I am Windows 7 64-bit on the desktop computer and a HP Photosmart C5280 attached that works very well as a default printer. Six months ago the A526 also worked well, but now won't. It becomes a frustrating problem, so if anyone can help it would be much appreciated.

  I also checked the device manager that indicates that the device is functioning properly and the driver is up-to-date.

  I was finally able to solve my dilemma with the help of HP Technical Support team. It took only 2 weeks, but we got there. For the benefit of anyone else who could run into this same problem, follow the steps to solve the problem, such as provided by HP: -.

  "You can try to reconfigure the printer drivers and then try to print and check if the problem persists.

  = Reconfigure the printer =.

  a. remove the printer from the Printers folder icon:
  * Click the start (Windows symbol).
  * Click on devices and printers.
  * Right click on the printer 'HP Photosmart A520 Photo Printer Series' icon and select 'delete device '.

  NOTE: Remove all icons printer referring to "HP Photosmart A520 Photo Printer Series.

  b. click on the "Print Server Properties" in the menu bar.
  c. click the tab drivers.
  f. Select the printer "HP Photosmart A520 Photo Printer Series. Click the Remove button to remove the driver. It will give you two options:
  * Remove the driver
  * Remove driver and Driver Package.
  g. Select "Remove driver and Driver Package".
  h. disconnect the printer USB cable.
  i. disconnect the USB to the computer.
  j. wait five to six seconds.
  k. restart the computer.
  l. plug in the USB cable to the printer and the computer.

  Try to connect the USB cable to the USB 2.0 on the computer.

  Now, check if the Windows Test page prints fine.

  = Print a Page of Test of Windows on the computer.

  a. open Printers by clicking the Start button, clicking on "devices and printers".
  b. right-click on the printer you want to test and then click Properties.
  c. on the general tab in the printer properties dialog box, click on print a Test Page. »

• HP Photosmart C5280 All in One

  I have a Photosmart C5280 All in one for about 2 years & never had a problem until yesterday when I tried to make a copy of an exchange of letters which came to preview & print with the left side of the A4 motorway all black and very low right hand. It was the same in the Scan but normal printing from the computer is perfect as it is printing on the discs. Anyone an idea what could be the problem. Any help would be appreciated.    Dave Scorpioking

  Hi Picardje. Thanks for that, have managed to get an another C5280 as a job but it is now (1 of 2) so I'm a happy Bunny. Thanks for your efforts. Kind regards. Dave. Scorpioking

• HP Photosmart C5280 All-in-one: HP Photosmart C5280 All in one will not wotk on new install

  I bought an HP Photosmart C5280 All in One several previously used and used with a dell dimension running windows xp woitout problems.  .  I rcently purchased a dell Windows 7 Professional or with a processor 15.  I reinstalled everything and get test of allignment of cartridges, and it keeps failing.  I did the partial reset and semi.  It wil not scan or copy.  Help, please.

  Hello @mgsindy,

  Thanks for getting back to me on this subject. I am pleased to hear that the issue of alignment has been resolved. However, because you get the message when copying or scanning that has occurred a "failure" and you screen gets stuck on 'Cancel' for the copy, you experience a hardware failure with your copy/scan inside your printer mechanism.

  Because the programming of your printer control the scanning/copying mechanism, I checked in an update of Firmware for your product to see if there was an update available in the corrupt case programming was causing your issue. Unfortunately, due to the age of your product, it is not these updates.

  You also mentioned that you did a semi Full reset programming on your printer, nothing helps.

  At this point, I will provide you the failure of scan standard troubleshooting steps to see if there is a chance to solve this problem.

  Step 1: Power Reset:

  1. With the printer, unplug the cable from power for 30 seconds
  2. After that 30 seconds reconnect the power cable from back in
  3. The printer should return its own
  4. Once the printer returns to the ready state, again test the copy feature.

  Step 2: Verification of power:

  Power strips and surge protectors can cause HP printers do not work properly because they can run out of power. To ensure that a power problem is not causing your Scanner failure, please plug the unit directly into the wall outlet.

  Once your printer is directly to a wall jack please test again the copy function. If the problem persists, please continue to the next step.

  Step 3: Check the Scanner Bar and light:

  1. Feed your printer
  2. Lift the lid flat on your printer and click the copy button
  3. Check if the scanner bar is moving or if the scanner lamp turns on.

  Source: A "Failure of scan" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  If there is no response from the mechanism of scanning, the last step would be the printer to service.

  At this point, if the problem persists I suggest you contact the Technical Support queue by phone to explore additional options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if the steps I have provided resolve your copy/scan failure. Good luck!

• Installing Center - HP Photosmart C5280 (all-in-One) - Windows 8.1

  Hello world

  Can someone help me with a Board? Question:

  Several times in the last 3 days, I tried to install the printer and scanner HP Photosmart C5280. I did everything that was recommended on the following page (and a few others):www8.hp.com/sk/sk/support-topics/windows8-support/printer-install-issues.html

  What is happening is that the downloaded file PS_AIO_02_NonNet_Full_Win_WW_140_408.exe will extract and then nothing more. Installation does not start.

  I aso did the following:

  • I tried to use HP HP printer install wizard for Windows and HP scanner doctor Utility - Diagnostic tools , but without success.
  • PC rebooted after each change
  • Blocked programs from startup such as recommended in the above mentioned link

  I will be obliged for all the advice that will be led to successful installation until I get angry.

  Thanks in advance

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  Kind regards
  Shlomi

• Need drivers for Win7 for old Satellite M40X-263

  Hello

  I hope someone can help me. I bought this second hand Toshiba and it was on Windows XP Home edition, so I formatted the HARD drive and installed Win 7 Ultimate. I ache to find lack of drivers such as
  -Ethernet controller
  -storage of mas controller
  PCI serial port-
  -video controller

  Laptop works much faster now and then in WXP but WiFi isn't working. I tried about 25 drivers of Toshiba support bud not off them works and my laptop doesn t have Win7 option on the support site. Any ideas?

  Tank help and sorry for my English, I'm from the Slovenia and I learned myself, so that's what it is

  This old model of laptop is not supported for Win7, so you will not be able to find the specific tools of Toshiba or any driver and utilities.

  Long ago, I had more recent M70 but with the same problem. These models have been designed for the Windows XP Home edition operating system. What you can try is to use Linux.

• HP 14 d037TU drivers do not work for WIN7 64 bit

  Hello

  Please help me solve the problem. HP 14 d037TU drivers do not work for WIN7 64 bit as below. I have try all means possible to install WIN7 64 bit player but no luck. I assume that the reader has not been certified for WIN7 64 bit.

  HP, it is not accepted as HP is one of the famous brand laptop with cart and incomplete product on the market.

  Please help to fix this.

  

  Hello:

  I just found the Holy Grail.

  Here is the link for the usb 3.0 driver, you need to know.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3467 & DwnldID = 23734 & Keyword = USB + 3.0 & lang = eng