Problems of RoboHelp 7 HTML with whtbar.js and the previous topics of WebHelp

Similar Questions

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• I bought a mouse microsoft 4000 mobile. It came with no disk and the page, to what he tells me to go said that is down. What should I do?

  I bought a mouse microsoft 4000 mobile. It came with no disk and the page, to what he tells me to go said that is down. What should I do?

  Hello

  1. what exactly is the problem?

  I suggest you explain clearly to us the question so that we can better help you.

  To troubleshoot failures in the response to the mouse or wireless keyboard, see this link: http://support.microsoft.com/kb/838398

  It will be useful.

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• Hi, I have a notice popping up whenever I sign in PS, saying that there is something with my payment info... I check with my card and the Bank and everything is ok on my end - I don't want to change my credit card info want to use this one to one

  Hi, I have a notice popping up whenever I sign in PS, saying that there is something with my payment info... I check with my card and the Bank and everything is ok on my end - I won't change my credit info card wants to use it at all times, was spotted or something and how can I get this fixed will, my next payment as planned intake and ignores the message? I wish I had this problem so I don't have an interruption in my service?

  Payment of 10 October 2015 has been denied 3 times as a result activation server has been informing you. Payment has been successful on October 30, 2015, the CC is active, you can ignore these guests, they must die now.

  Concerning

  Stéphane

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• Just upgraded to 10.0.2 and now he can't findwebsites - three that I know have been created with WordPress. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank yo

  I get the following error message: gone the requested resource / is no longer available on this server and there is no forwarding address. Remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument directive to manage demand. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank you.

  Found the problem - it's a HT Access file on the site itself. Deleted the file and 10.0.2 works very well.

• Problem with Windows Explorer and the recorded files

  When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

  Hi Flingle,

  Were you able to save and access files correctly before you update Firefox?

  You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Anyone having problems with Windows 7 and the HP LaserJet P2035n?

  It seems, after a few months of service, there are several problems with this printer and Windows 7 only.  We have several offices that use this printer and almost each one has similar problems.  It will printer randomly disappear, not being able to print anything at random times of the day, to the spooler crashing every two minutes or more.  There is no problem at all with Windows XP or Vista, only 7.  Reinsalling the printer driver takes care of the problem for a few days, but the questions up all over again.

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:

  TechNet forums

• Creating a tag HTML with Dreamweaver/Muse and its import for Joomla?

  Hello

  I was wondering if it is able to find a way to connect between Joomla and Adobe Dreamweaver.

  So I'm a designer and I would like to use my skills in design of photoshop and illustrator to create a Web site. So I'm reshape an Internet site to my work and their site is out of Joomla. I know how to import photoshop or illustrator Dreamweaver files and download a html on the web, but I did not download a html/css for Joomla. I have no idea whatsoever about Joomla, but I am familiar with HTML and CSS, and its conversion to filezilla.

  Please help, I want my online drawing or an overview of Joomla and see how it goes from there because I'm not a developer... just a designer.

  Thank you.

  You do not import HTML/CSS in Joomla and you can copy and paste your code in a selective way.

  Joomla already has a Web page for you and all you have to do is to copy the content of your page of DW in Joomla.  This means all the code between the....the HTML tags in the code editor for DW.  All this is done in 'Items', and you will need to switch between HTML and WYSIWYG editor.

  Also, please note that Joomla 3.4.8 (the current version) uses "bootstrap" version 2.3.2 and there is no easy way to upgrade to version 3.3.6 bootstrap one we use in DW.  The tutorial for 2.3.2 are at this link:

  http://GetBootstrap.com/2.3.2/base-CSS.html

  http://GetBootstrap.com/2.3.2/components.html

  http://GetBootstrap.com/2.3.2/scaffolding.html

  Codes between the two versdioins are very different, so when you post a question here, you must indicate your Bootstrap version.

  Of course I refer to default Joomla template called protostar (it's free) but some premium models have already managed to create new models for Bootstrap 3.3.6.

  Good luck.

• I was wondering if there were other problems with Adobe CC and the last IOS El captain?

  I've recently updated to IOS Yosemite to El Capitan, when I went to launch Premiere Pro for the first time, there were a few very visible differences of how things went, if not, the program has worked very well.

  Thinking that this might just be a problem after installing just El Capitan, I thought that a reboot would clear things up. When I went to restart, I could not go beyond the initial start-up of the grey Apple screen, I ended up having to wipe the drive and reinstall El Capitan, nd, then migrate my data from my backup of TM, what a shot, it took hours to complete.

  Anyone else having similar problems? Anyone know when Adobe get out their CC to CE upgrade?

  I don't know about Apple (I'm on Windows), but I read that Microsoft has a way to restore the previous operating system if an upgrade to Win10 does not work

  I don't want to know about it, because my Win8.1 works with all my current software... I have read Win10 problems with the software that I have now, so I will NOT go to Win10

  If Apple does not offer a way back to the BONE you had before, I think you're stuck with problems until 'the 3rd party vendors' make changes to work with El Capitan

  And, if you do a "time machine" backup before the upgrade, be aware that TM backups do NOT work with Adobe because of... hidden folders software then you would need to uninstall and reinstall

  And just so you know, Microsoft has also problems with Mac 10.11 El Capitan

  -http://www.macrumors.com/2015/10/05/microsoft-office-2016-el-capitan-bugs/

• Problems with configuration properties and the java plugin

  Hello
  
  I have test the java plugin from the hyperic documents. Autodiscover works very well. Now, I had the problem if I want to change all "configuration properties" I get following error message:
  ' The configuration has not been set for this resource due to: invalid configuration: error reported by Agent @ 141.73.130.146:2144: java.lang.NullPointerException.
  Wait I use properties by default, then I don't get any errors.
  
  What is the problem?
  
  MyAutoDiscoveryServerDetector.java
  ---------------------------------------------------------------------------------------------------------------------------
  SerializableAttribute public class MyAutoDiscoveryServerDetector extends ServerDetector implements
  
  {AutoServerDetector}
  
  public list getServerResources (ConfigResponse platformConfig)
  
  get {PluginException}
  
  Server list = new ArrayList();
  
  Server ServerResource = createServerResource ("My Auto-Discovery Server->" + (x + 1));
  
  ConfigResponse productConfig = new ConfigResponse();
  
  productConfig.setValue ("myTimeout", String.valueOf ((x+1) * 1000));
  productConfig.setValue ("myUrl", "http://127.0.0." + (x + 1));
  productConfig.setValue ('Description', 'Description - my Auto Discovery Description->' + (x + 1));
  productConfig.setValue ("myValue", 10);
  
  server.setProductConfig (productConfig);
  
  Servers.Add (Server);
  
  return of the servers;
  
  }
  ---------------------------------------------------------------------------------------------------------------------------
  
  HQ - plugin.xml
  ---------------------------------------------------------------------------------------------------------------------------
  <? XML version = "1.0"? >
  < package = "com.citytechinc.articles.hyperic.plugin plugin" >
  
  < name of the filter = "domain" value = "My Auto Discovery" / >
  
  < name of the server = "MyAutoDiscoverServer" version = "0.1 c" platforms = "Unix, Win32" >
  
  < plugin type = "autoinventory" class = "MyAutoDiscoveryServerDetector" / >
  < plugin type = 'measure' class = "MyAutoDiscoveryServerMeasurementPlugin" / >
  
  < config >
  
  < name of option = 'myUrl '.
  
  Description = "Enter the URL for this resource"
  
  " default = ' http://127.0.0.1 "/>
  
  < name of option = "Description".
  
  Description = "enter a description of this plugin"
  
  default = "default my Auto Discovery Description" / >
  
  < name of option = "myTimeout."
  
  Description = "time-out for something in my plug-in.
  
  default = "0" / >
  
  < name of option = "myValue"
  
  Description = "a metric value.
  
  default = "10" / >
  
  
  < / config >
  
  
  < name metric = "availability".
  alias = 'availability '.
  Template = "System.avail:type = Platform:Availability"
  category = "AVAILABILITY".
  indicator = 'true '.
  collectionType = "dynamic".
  units = "percentage" / >
  
  < name metric = 'value '.
  alias = 'value '.
  model = "" MyPlugin:Type = value: value ' "
  category = 'USE '.
  indicator = 'true '.
  collectionType = "dynamic".
  units = "none" / >
  
  < / Server >
  
  < / plugin >
  ---------------------------------------------------------------------------------------------------------------------------

  UM,.

  This must be due to an incompatibility between the definitions of plugin in the server (and/or of the database) and the agent.

  First of all, always check the server log, errors that appear it should lead to the cause.

  The plugin xml initialized ok on the server, or any error appear?

  You go to Administration-> default trace and see your plugin (Server Type: MyAutoDiscoverServer) and everything is there?
  If this isn't the case, errors occurred when starting the server, check the log.

  Did you start to shave - created the plugin, added to both server and agent, autodiscovery, the platform/server added in Hyperic - or you already had the server/platform added in Hyperic and who has made some changes in the xml plugin that may be in conflict with what is already in the Hyperic database?

  Generally the pitfalls that come from these errors.

  Been there, done that.

• Problem of using IE 8 with Hyperion Planning and workspace

  Has anyone tried using IE 8 with Hyperion Planning and workspace? I found that sometimes it has the error message and cannot allow users to log out.

  Hello
  We tried IE8 with system 11. It simply doesn't get it. IE8 is not officially supported yet. And over the years, I have learned this lesson: never use a new browser, unless it is officially in charge.
  You can find a page very useful here in this link to see what is currently supported for your release.
  http://www.Oracle.com/technology/products/bi/Hyperion-supported-platforms.html

  Alp

• Acer aspire problem vn7 - 591 g nitro with high CPU and GPU temperatures

  Hello! I recently noticed some issues (lower fps) performance when you play semi demanding like cs and Overwatch, although pretty much the lowest settings. I went to download CPUID (software to monitor your hardware) to check my temperature and I noticed that I reach 90 low to high (depending on the game) when I play.

  I thought it might be dust or something inside so I removed the keyboard of the laptop part and used some canned air to remove any dust I could reach (without removing the motherboard). I also managed to get your hands on a laptop computer, cooling rack. The problem is that all these efforts really solved the problem. Just a slightly lower temperature on the GPU and about the same on the processors. I'm starting to wonder if it could be the thermal paste, which need to be replaced? I had the computer for a little over a year now. Does anyone else know similar problems? Help or advice would be appriecated.

  Hello

  The CPU and the GPU are designed to operate at these temperatures. If they are too high they will be the butterfly, and if even this does not then at some point they just instantly shut down to avoid any possible damage.

  Changing thermal paste may improve performance, but you will only get lower temperatures. Your CPU/GPU will probably run at higher clock speeds and will not throttle, but temperatures will be in the same range. But in my experience if you can change the thermal paste, you should.

  Also, you can use the laptop fan control that has the configuration for 591g and it may further increase the fan speed. I think, from the factory, the maximum speed of the fan is just about 60-70%.

  https://github.com/Hirschmann/NBFC/