Problems ordering?
I don't know if it is the right place for this but is anyone else having problems ordering OnPlus units? Tech Data specifically told me that he has been shot and is not available to order at this time. No idea why? If someone else has received this information, please post here. Also, if someone else could control in the last few days please let me know. Thank you!
Hello
Thank you for your notice of the present, let's check this with Tech Data.
Network Agent OnPlus 100 is available through all major distributors. D & H has this stock together with Ingram Micro and Comstor, if you have an account with one of them. Indeed, D & H has a promotion NFR on OnPlus, where you can get service for 50% off.
I'll let you know once I hear from Tech Data.
Thank you
Efrat
Sent by Cisco Support technique iPhone App
Tags: Cisco Support
Similar Questions
-
There was problem, order processing, please contact customer care on 8000-448-1642. But unable to reach them. Please notify
Please contact support:
I hope this helps.
Concerning
Megha Rawat
-
Sort problem: ORDER BY the numbers all first instead of characters first
Hello
I need help with the problem of the following sort:
create table test01 (sorting_column varchar2 (30));
insert into values test01 ('Test123');
insert into values test01 ("Test987");
insert into values test01 ("123Test");
insert into values test01 ("987Test");
insert into test01 values (string 'test');
Select sorting_column from test01 arrested by sorting_column;
SORTING_COLUMN
------------------------------
Test string
Test123
Test987
123Test
987Test
This is not the order that I need. I really wish it were (numbers before characters):
123Test
987Test
Test123
Test987
Test string
Can anyone help?
Thanks in advance,
MarcSELECT sorting_column FROM test01 ORDER BY nlssort(sorting_column, 'NLS_SORT=BINARY') ;
Can be set at the level of the session as well:
ALTER SESSION SET NLS_SORT = BINARY;
Published by: odie_63 on June 20, 2011 17:45
-
Hello
I have a drop down menu which lists postal codes (address UK codes) in the order of the CSA. This all works well, except that the order is not as I would like to:
for example, the display of postcodes CSA listed as follows:
KT1
KT10
KT11
KT12
KT16
KT18
KT2
I see that the list is classified "correctly", but I need at least logically, list as follows:
KT1
KT2
KT10
KT11
KT12
KT16
KT18
Is this possible using SQL or any other method?
Hi Jules,.
Thanks again for the input, really appreciated. I found the solution:SELECT * postal CODE ORDER BY Left(postcode_code,2), CInt (Mid (postcode_code, 3, 2))
This works a treat. Thanks again.
-
I have a compaq f 700 presasio I try for 2 weeks order recovery disc (3) web site does not work... my order never ends
Hello loriemichigan,
I understand that you are having problems ordering from disk to restore the sites
Your best bet would be just to call him to order. Call-1-800-474-6836 and they should be able to process the order for you.
Let me know if it helps.
Thank you.
-
When ran the following query, I got the enames unordered result. Does anyone know how to get the wm_concat to the order\sort column? I use oracle v10. Any thoughts are appreciated. Thank you.
Select distinct deptno, wm_concat (ename) over (partition by deptno arrested by deptno) as enames
WCP
Ename, deptno group
order by deptno
output current:
The target output:DEPTNO ENAMES 10 MILLER,CLARK,KING 20 SCOTT,JONES,FORD,ADAMS,SMITH 30 MARTIN,JAMES,WARD,ALLEN,TURNER,BLAKE
WanwanDEPTNO ENAMES 10 CLARK,KING,MILLER 20 ADAMS,FORD,JONES,SCOTT,SMITH 30 ALLEN,BLAKE,JAMES,MARTIN,TURNER,WARD
wm_concat is undocumented. so please do not use it. You can use the following query. It also solves your problem order.
select deptno, ltrim(sys_connect_by_path(ename,','),',') from (select deptno, ename, row_number() over(partition by deptno order by ename) rno from emp) where connect_by_isleaf = 1 connect by deptno = prior deptno and rno = prior rno+1 start with rno = 1
-
someone has FedEx hostage your apple product?
So I order online a mini iPad & keyboard cover for the birthday of my daughter who is a week away. No problem, order went through fine, will arrive on time. So, I am tracking the FedEx package and the keyboard cover comes first. Now I am tracking the iPad and it gives me a date earlier scheduled delivery, Great! even better, now I know that it will be for sure at the time. So I watch followed FedEx the day they said it would be delivered 10:26, it is to the East and I'm on the West Coast, I think how it get delivered today if it is so far away. I look at and then I see it says "Refused by the addressee" uh this isn't me? I'm not in this State, but he said that I refused it? I check my front door to see if there is a tag or something, anything! So I called FedEx who after that goes around and on how I could not have refused it because I live in a State completely different than where they say he was 'denied' they put a tracer on it, call me and say that security is due to "security issues" holding office FedEx said they think it is a "counterfeit product" so she asks which is in the box. I said a mini Apple iPad. They hold well and she told me to call FedEx and ask for security. I called and the guy had no idea what I was referring to, he looks to the top of my follow-up and could offer no explanation what was going on and now it is for FedEx desktop to the East where the package is being held to call me tomorrow because they are now closed! at this rate now I will not get it in time for my daughter's birthday. Has SOMETHING like this happened to someone? It's crazy!
No, nothing like that happened to me, and no one here can help you, it's between you and Fedex
-
Satellite Z830-10 t - battery replacement
Hello
I would like to know how I can replace my PC (Satellite Z830-10 t) to the Japan.
Two years ago I bought the PC in the United Kingdom, and now I'm living in the Japan.
The computer battery is not recharged and now counted more, so I think I need to replace the battery.
Then, I asked Toshiba support the Japan to replace the battery, but they refused my offer, because they deal only with products sold to the Japan.Could someone tell me how I can replace the battery from my PC to the Japan?
Should I send the customer to the United Kingdom? If so, what is the address? How much does it cost?
Or, it may be necessary to think of the battery by myself. In this case, could someone tell me what is the battery product number?Thank you in advance.
Sincerely,
YukiIt is not easy to give you good advice you can do. Problem is that your laptop must be disassembled and this should be done by authorized personnel only.
Perhaps, you can order battery from the United Kingdom and to ask ASP to the Japan to exchange it. It should not be problematic. I can imagine that they have a problem ordering original parts.
Try to order in the United Kingdom, or maybe you have someone who can do it for you and send it to you.
Check also similar thread - https://forum.toshiba.eu/showthread...llite-Z830-10U
-
Conflict between Javascript and Amazon
Using Safari 9.0.3. This week I started problems ordering from Amazon (Amazon pages of gel). It turns out if I turn off Javascript, the problem goes away. Community support Amazon shows a lot of customers with the same problems. No help from technicians of the Amazon. My question is, is this Javascript, Safari or Amazon?
Morgan R,
I almost had to laugh when I saw your post. There is at least one thread that is old more than twenty days and 5 pages long, so far.
Please go here for a "definitive answer"...
This could be the cause the dervishes ball or freezing page in Safari (most often in the Amazon)?
-
Comp hangs upon the release of the standby mode
I have a Pavillion g7 notebook comp running Windows 7. About a week after the expiration of the warranty he began to break down during the recovery from the sleep mode. Now, it crashes almost everytime. I tried to download updated drivers from HP.com, but it did not help. I would like to do a reinstall clean (don't know if it's exactly the right name for it) in which the model is returned to the State it was in when it was brand new, with the exception of save personal files in My Documents, my pictures, etc. The model did come with a disc to restore so I don't know how to do it. Thank you very much in advance for the help and be specific because I've never done this before.
There are several ways to recover the OS to factory settings... Here we go.
(1) Please try to run the f11 recovery that will install the operating system using the recovery partition. It's the best way to solve the problem. type just hit f11 when the turn on/off the computer. (Make sure that the recovery media is already created by you using Manager HP recovery for future use).
(2) snack F11 does not work and that you have created the media, use your own recovert holder that was created on the same computer.
(3) where no one (f11 and self created dvd/CD) work and you need to get the DVD from DVD HP. order HP and use them to re - install the operating system.
This should help get the media.
http://support.HP.com/us-en/document/bph07143Otherwise, please visit www.hp.com ; Select the country from the left of the bottom if you are outside the United States.
now, please select "support and drivers" > now click on drivers & software > enter a model number of your computer. (if the list is populated in the case of similar models are there in this series, select the model you have)
Select the operating system you have received this with computer and click Next > now, you should get an option "order recovery media - select it and under that you have the type of available media.» SELECT and the desired media.
Incase you have problem ordering media; You can try after some time or contact support HP to get media ordered.
also for the recovery of countries or products little online ordering is not available; in this case, the visit of the region/country ( www.hp.com and some countries). Click on connect with HP and HP. e-mail/phone support contact numbers are available, please call to place an order for your product in the country concerned (if available).
I hope this can help, good luck!
-
How do reformat you a hard drive?
I have a Compaq SR5214X and I would like to reformat the drive and start with a clean load of my operating system. How can I do this?
Hello
Good luck, trying to find, but if you can't, you should have no problem ordering from one of the first 2 links in my previous post - I think they cost about $10 to the United States.
All the best,
DP - K
-
Cannot open the title, errors have been encountered at that point.
Cannot open the title, errors have been encountered at that point. bought 3 Google books give all 3, same problem, ordered same title on one of Kobo store and have the same problem. No problem with no DRM products or small book DRM I bought. With the help of windows 10.
And what error message you get exactly?
-
Plan El contratado, sigue seeking series fr Cc, version of prueba¡¡
Buenas noches, imply ayer el plan basico, actualice photoshop lightroom to y a Cc, pero me sigue tried serial, esta prueba version.
There s todo lo than dice aqui respecto al tema: Adobe Creative Cloud pide el serial number application y nada esto me ha fixed the problem, ordered asesorarme, a saludo y gracias¡¡
Hello
First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.
https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
-
I have this request:
and I got thisselect null link, creationdate label, COUNT(PROBLEM) BER from INCIDENTS where PROBLEM=:p10_id AND SOURCE = 'BER' and creationdate between (select (min(creationdate)) from INCIDENTS where PROBLEM=:p10_id) and SYSDATE group by creationdate, PROBLEM order by creationdate asc
LINK LABEL ASR
-1 27/08/2012
-1 27/08/2012
-1 27/08/2012
-1 27/08/2012
-1 27/08/2012
-1 27/08/2012
-1 28/08/2012
-1 28/08/2012
-1 28/08/2012
-1 28/08/2012
I want to count the amount on each date. For example the query returned 6 Articles for 27/08/2012 how I see it like this:
LINK LABEL ASR
-6 27/08/2012
-4 28/08/2012Hi, you should probably be truncate your date of creation
select null link, trunc(creationdate) label, COUNT(PROBLEM) BER from INCIDENTS where PROBLEM=:p10_id AND SOURCE = 'BER' and creationdate between (select (min(creationdate)) from INCIDENTS where PROBLEM=:p10_id) and SYSDATE group by trunc(creationdate), PROBLEM order by trunc(creationdate) asc
Kofi
-
Difference between Oracle versions!
Hello
I would like to know the difference between versions of oracle from oracle 7.
Also would like to know a way to understand the particular function works in version oracle x but not before version x.
for example. listagg function came in oracle 11.
Is there a link where I can find it and consolidated in one place.Hello
923808 wrote:
Hello
I would like to know the difference between versions of oracle from oracle 7.
Also would like to know a way to understand the particular function works in version oracle x but not before version x.for example. listagg function came in oracle 11.
LISTAGG was back in 11.2, to be exact.
Is there a link where I can find it and consolidated in one place.
Not that I know of.
From Oracle 9, there is a 'What's new' manual with all versions. For example:
http://docs.Oracle.com/CD/B10501_01/server.920/a96531/TOC.htm
Also from Oracle 9, most commonly used textbooks have a "What's New" section to the beginning:
http://docs.Oracle.com/CD/B10501_01/server.920/a96540/wnsql.htm#971925Here is a list I made for my personal use:
Index of Features, showing when they were introduced into Oracle ADD_MONTHS Function 6.0 or earlier Aggregate functions, user-defined 9 ALTER TABLE x RENAME COLUMN a TO b; 9.2 Analytic Functions 8.1 IGNORE NULLS 10 APPEND, SPOOL 10 BINARY_INTEGER same as PLS_INTEGER 10.1 http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/datatypes.htm#sthref690 CASE Expressions 8.1 CLOB Datatype 8.1 or earlier max size=4G in versions 8.1 and 11.2 COLUMN ... FOLD_AFTER (or FOLD_BEFORE) 8.1 or earlier Conditional Compilation of PL/SQL 10.1.0.4 CONNECT BY 2 CONNECT_BY_ISCYCLE pseudo-column 10 CONNECT_BY_ISLEAF pseudo-column 10 CONNECT BY NONCYCLE 10 CONNECT_BY_ROOT operator 10 LEVEL <= x (for Counter Table) 8.1.7.4 Re: Oracle Virtual Machine Connect by Prior Problem ORDER SIBLINGS BY 9 Subquery in START WITH clause 9.2 or earlier SYS_CONNECT_BY_PATH function 9 DATE between 4713 and 9999 8 DATE Literals 10 DBMS_Metadata 9 DBMS_RLS 8.1 DBMS_SCHEDULER 10 DELETE in MERGE 11.1 EXTRACT 9 FIRST Function 9 FOLD_AFTER (FOLD_BEFORE) in SQL*Plus COLUMN 8.1 or earlier Foreign Key Constraints 7 (very limited enforcement in 6) Functions, User-defined 7 Aggregate 9 GREATEST Function 6.0 or earlier IGNORE NULLS in FIRST_VALUE, LAST_VALUE 10 in LAG 11.2 In-Line Views 8.0 (documented in 8.1) KEEP (DENSE_RANK ...) 9 LAST Function 9 LEAST Function 6.0 or earlier LISTAGG 11.2 LNNVL Function 10 MEDIAN Function (Aggregate or analytic) 10 MERGE 9 MERGE ... DELETE 10.1 MODEL 10 MONTHS_BETWEEN Function 6.0 or earlier NEW_TIME Function 6.0 or earlier NOCYCLE, CONNECT BY 10 NTH_VALUE Function 11.2 NULLIF Function 9 ORDER BY in Sub-Queries 9 ORDER SIBLINGS BY 9 OWA_Pattern Package (for Regular expressions) 9 Partioned Outer Joins (Query Partitioning) 10 PERCENT_RANK function 8.1 PIVOT 11 PLS_INTEGER same as BINARY_INTEGER 10.1 http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/datatypes.htm#sthref690 Policies, Row-Level Security 8.1 PURGE 10 Q-Notation for string literals 10 Query Partition 10 Read Consistency 4 Recursive subqueries 11.2 Regular Expressions 10 expr argument (_INSTR and _SUBSTR) 11.1 OWA_PATTERN Package 9 Row-Level Security Policies 8.1 Scalar Sub-Queries (except in WHERE, etc.) 8.1 not documented until 9.1 SPOOL ... APPEND 10 STATS_x Functions (Incl. STATS_MODE) 10 SYS_CONNECT_BY_PATH 9 SYS_CONTEXT 8.1 USERENV introduced in 8.0? SYSDATE as Function 6.0 ? (It was a pseudo-column in PL/SQL 1.0, 1989. 6.0 SQL Language manual (1990) calls it a function.) Triggers 7 User-Defined Functions 7 Aggregate 9 USERENV Function 8.0? Expanded to SYS_CONTEXT in 8.1 UTL_Match Package 11.2 In Packages and Types manual Virtual Columns in tables 11 VPD ("Virtual Private Database") 8.1 WIDTH_BUCKET Function 9 WITH Clause 9 Recursive 11.2 XML 9 XMLAGG Function 9.2 (not in 9.1 SQL Language manual) XMLELEMENT Function 9.2 (not in 9.1 SQL Language manual) XMLQUERY 10
Published by: Frank Kulash, 28 March 2012 18:44
Maybe you are looking for
-
Magic keyboard doesn't work don't perfectly with Mac-mini mid 2011
I am running the latest version of El Capitan (OS 10.11) The system version: OS X 10.11 (15A279b) Kernel version: Darwin 15.0.0 Apple Bluetooth software: 4.4.0f4 16320 These correspond to the requirements of Magic Keyboard (Mac computer compatible Bl
-
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
-
No sound from altec lansing speakers model 221.le Running windows xp.
-
Linksys device to connect to a wifi network
Dear all, I want to buy a linksys device that supports to connect to a wireless network available to connect to. The idea resembles the network conversion wireless to a wired network. A device that is unique? And if there is no device has this featur
-
Type of display and Dell U2413 technology?
Hello! I have Dell U2413 monitor and i1Display calibration Pro and X-Rite i1profiler software. My question is, what should I choose in the list below? Select your type of display and technology CCFL Wide Gamut CCFL white LED RGB OLED Plasma RG Phosph