Problems publishing Web site after change of Front Page, Dreamweaver.

Hello world

I am despritely hoping that I can find that much needed some assistance in this forum.  I recently bought a brand new mac book pro and then pulled the trigger on the Dreamweaver CS5 software to go with it.  I had to change my gear from site of a tower of Dell 2000 and Microsoft Office FrontPage 2003 software.  My old computer had become too slow and too old to work with and my website has been neglected because of this.

My web page is hosted by www.bluehost.com and I had success pretty well with them over the past five years.  I spoke at length with their support to customers today and they directed me here, suggesting that my problem might be better served by Dreamweaver users themselves.

MY PROBLEM:

Like I said, I made the switch to Dreamweaver to Microsoft Front Page.  The part of it seemed very easy, as at this point everything seems compatible.  Then I created my server information (Blue Host) in Dreamweaver.  And then ran a test and it tells me this: "Adobe Dreamweaver CS5 connected to your web server successfully.   Which is good news right?  At that point, I thought I was in the clear.  As I started to make minor changes to the home page of my site, I decided that I would see if it worked.  Then I saved my corrections.  I clicked on "Preview in safari" and all my fixes were obvious and seemed to work.  So I decided it was time to actually publish my corrections on the web.  So I clicked on "Site" and then went down and clicked on 'Put' (I was told that this is what needs to be clicked to publish in dreamweaver).  then, a prompt appears and says that it connects to my site.  I don't then get a prompt asking me, ' put dependent files?   (I tried clicking on Yes and no on that and seems not to matter so be it).  But the result is always the same.  MY SITE IS NOT updated on the web.

-What I have to do something specific in the transition from Microsoft for Dreamweaver and that's why I can not post?

-Are my files not go in the right places they need to go update the site properly?

I'm completely lost on this issue and I am far from being a computer geek or tech savy.  I wonder if anyone has any ideas for me or help.  It would be greatly aprecciated!

Thanks in advance,

Brenner Flaten

> He says that it is perhaps the issue as

> bluehost won't acknowledge

> 'public_html'... What do I put in my root folder.

No.It no matter where your local site is on your hard drive or what the folders are named. What matters is where you set the root site in the site manager. In your case, it should be the site of site\my xxxx\montana cats.

You don't need a public_html folder on your local drive.

Tags: Dreamweaver

Similar Questions

  • I can not connect to a secure Web site after changing my account information

    I change my main e-mail address for my account with an online retailer, but when I tried to connect using my new email address it wouldn't let me. I sent a message to their tech support and after several attempts, I gave up. Then I changed my email address for my ebay account and the same problem, even if my email address is not my user name. I tried to connect to ebay using IE and no problem. I returned and tried the online sales site and it also works with IE.

    • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
    • 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".
  • Single-pass does not work for Web sites after the last update of firefox

    Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

    Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

    You may need to exit Firefox and start it again before it takes effect.

    A little luck?

  • Add content to my already published Web site

    can I do more major changes to my already published Web site

    You can make any type of editing that you like. Simply publish again in the same place when you have completed your changes.

  • Published Web site has components shift and disappear when the browser annotation scale.

    Hello world

    I am including a link to the published Web site, as well as including some screenshots of what looks like the question from my point of view. Just like a pre-emptive note: I had this problem before, and it was resolved by publishing a completely new site. I have saved the file under a new name, but also published the site under a new name and continue to encounter this problem. In addition, nothing is extended to the edge (for this thing of infinite width/length of browser).

    Thanks for any advice or assistance!

    http://argp07.BusinessCatalyst.com/index.html

    Y01.jpg

    ^ This is what the site looks like Muse.

    N01.jpeg

    ^ What the published site looks in my browser (Google Chrome) to 100%.

    The word 'Practice' is missing in the upper right of the page.

    Everything is well proportioned.

    N02.jpeg

    ^ What the published site looks like in my browser (Google Chrome) 90%.

    The word 'Practice' has re-emerged, but the vertical line disconnected (shifted down).

    Everything is well proportioned.

    N03.jpeg

    ^ What the published site looks like in my browser (Google Chrome) 80%.

    The word 'Practice' has disappeared again, as well as the vertical line.

    Everything is well proportioned.

    N04.jpeg

    ^ What the published site looks like in my browser (Google Chrome) 70%.

    The word 'Practice' has disappeared again, and the vertical line disconnected (shifted down).

    Text box at the bottom has turned into two lines of text.

    The layers of this provision include:

    Vertical line (rectangle of 1 px width)

    Horizontal line (rectangle of width 3 px)

    Text box group of practical architects

    White rectangle ON the bottom of the text box practice group of architects, UNDER the vertical and horizontal lines.

    The Accordion Panel

    Slide show

    Contact info text box

    I'm waiting for the line is defined as a footer in the properties of the Site (and/or the Page Properties) and "Sticky Footer" is so the footer sticks to the bottom of the browser window if the content of the page is shorter than the browser window.

    Your design, I hope that you want to disable "Sticky Footer" in the Site properties and disable "Item footer" to the line.

  • Cannot find my published Web site

    Hello

    After creating my dreamweaver site, I clicked on "manage sites" and under "Remote Info" for my site, I chose a ' local/network' access to publish on the web. Beforehand, I followed the instructions to start the server web macintosh "Apache".

    I was a little puzzled by this folder in which choose as my remote folder. I clicked the folder icon and chose the same folder that I use as my local folder. I don't know if it was good.

    Now, where's my published Web site? If I go to Apple - system preferences - sharing and click on one of the addresses on that they gave me when I turned web sharing, my site does not appear as I predicted he would.

    What I am doing wrong? Help, please. Thank you

    Erin.

    Hello Erin

    Remote Info is the site management section allows you to say DW where you live site is.  In my sites, so that's where I put my details of the FTP host.  If you use Apache on your computer, you must watch the testing server.

    This tutorial is listed in the FAQ of the forum page and tell you what you need to know.  If you have Apache installed on the machine you you could skipp page 5 where there is a section on settin DW to use your installation.

    I hope that helps

    Martin

  • I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

    I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

    425 is the error that you have been doing all along? That looks like a firewall or router problem or a server side hosting configuration problem.

  • How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

    How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

    This just started happening the last two days.  I tried to add the url to my list to activate in Internet Options, also to accept the list for windows firewall. I rebooted and restored.

    It is annoying when I can't access Web sites on my PC.  There is no control parenting, nor is it a reason to be since I'm 57 years old, single, live alone and have no children, and not to mention that this isn't a single adult site. This is an auction site.  The same thing happens on a site of sports too.

    Hello

    Thank you for writing to Microsoft Communities.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    1. what operating system is installed on the computer?

    2. what version of Internet Explore do you use?

    3 have there been recent changes to the computer before the show?

    Please go ahead and follow the steps mentioned and later a update on the State of the question.

    Method 1: Start Internet explorer with the mode without modules and check.

    Click Start, all programs, accessories, System Tools, and click Internet Explorer (No Add-ons).

    If the problem does not persist in Internet Explorer (No Add-ons), then it is one of the Add-ons at the origin of this problem. Please follow the steps below to locate the problem the weak module:

    a. restart IE normally.

    b. click on tools.

    c. click on Manage Add-ons.

    d. disable add-ons by clicking on them one at a time to highlight and then click Disable.

    e. reactivate modules one by one and check with what add-on, you get this error message.

    f. turn off the add-on at the origin of the problem.

    For your reference: http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

    (For Windows Vista)

    Method 2: How to optimize Internet Explorer:

    http://support.Microsoft.com/kb/936213/no

    Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

    Follow these recommended steps and after if you still experience the problem.

  • all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

    all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    You can try to reset (power off / on) of the router.

  • My published Web site cannot scrolling

    Hi everyone, I hope someone can help...

    Please check my published site to-> home

    When opened in Imac no problem on the screen display.

    But when I change my Acer laptop and run it in Google Chrome.

    I can't watch my site completely, I mean I can't scroll down my site to display the page footer.

    Or even smaller that the size of the browser then can see the Global Web site.

    My site is resolution is 1024px x 768px

    If it doesn't matter which setting need to changes made to the file of Muse?

    Thank you so much, if any advice!

    Hello summitshoes,

    Please go to file > real estate Site in Muse and make sure the "sticky footer" option is checked.

    After checking try them at the preview in the browser page and check if the browser is filled.

    Let me know if it worked.

    Kind regards

    Ankush

  • Cannot publish Web site

    foutmelding.PNG

    Hello

    How is that possible? I can't publish the Web site more?

    Muse is very slow, it takes a long time to publish the site and after the Muse crashes.

    How can I solve this problem?

    Thanks for responding!

    Best regards

    Frank

    I remember, we saw this issue in 2015.2 which is supposed to have been fixed with the latest update 2015.2.1

    Can you confirm that you are on the last update? Select help > about to let us know.

  • PROBLEMS WITH WEB SITE

    I always have problems with the site freezes Kohls with the cursor in the box "add to bag". However, I tried accessing the site Web of Kohl by using Internet Explorer (I never use). In any case, it worked! Why it should work OK in Internet Explorer and not in Firefox? What should I do now?

    Okay, AdBlock Plus is very good, and I don't know about the others. What I recommend is disabling all then by visiting them the page. (Make sure you reboot if you need to disable addons) Tell us if the page works after that.

  • Cannot access Web sites after refresh

    I can't download my pictures to the usb and the computer does not allow me to download anything at all

    Original title: I can not download anything windows8 IE 10 I refresh computer and its worse I can't access multiple Web sites

    Hi Maxine,

    According to your description, it seems that you are facing several problems on your computer. I will help you certainly with the same. However, we need a few details to better understand the cause of the problem.

    1. You have recently made any changes on your computer, prior to download?

    2. You get no matter what error message when you access the Web sites?

    3. What is the brand and model of your computer?

    4. Y at - it an update of Windows that recently failed?

      Note: For the numbers of KB updates of windows, the underlying steps:

    1. Press Windows + C to open the bar of charms.

    2. In the search box, type Update, and then in the list of results, click Windows Update.

    3. In the left pane, click view update history.

    From now on, I suggest the following methods:

    Method 1:

    Start the computer in a clean boot State, and check the status. A clean boot to check if any service or third party application startup is causing this issue.

    Clean Boot WARNING: putting your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    Once you perform Clean Boot please perform method 2 to continue troubleshooting.

    Method 2:

    Make sure that all Windows updates are installed on your computer, as the issue may occur because of some missing security updates.

    Please follow the steps to install the available Windows updates.

    1. Press Windows + C, type Windows Update in the search box, and then click Windows Update in the results pane.
    2. Click find updates. When the scan finished, click optional review updates.
    3. Click the check box next to the update, and then click install updates.
    4. If you are prompted, read the license agreement, then click I agree.
    5. Follow the instructions on the screen to download and install updates. If you are prompted, restart your computer.

    Once all updates installed, please restart your computer and check again.

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Edition published Web site

    Is it possible to change my site in Muse, even after the site has been published? I know that you can use in the edition browser, but I want to be change in my software. Is this possible?

    Well Yes, you can make as many changes, add new pages or whatever it is, you want to Muse and re - publish as long as you have not made any changes outside of the Muse.

  • Internet Explorer problems with Web site

    We have problems with our site Web display correctly in older versions of Internet Explorer. It seems fine in the newer versions and other web browsers, but in Internet Explorer its is not centered and the information is sent down below the navigation. The site is www.wctractor.com for help or answers are greatly appreciated.

    The first lines of the document shows

    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

    Internet Explore hate having to look down the document to highlight lines, spits the dummy and goes into Quirks Mode (i.e. a mode before IE5).

    Remove the

    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

    bit and place the following on the first two lines of the document

    IE will be a very happy chappy after that.

Maybe you are looking for

  • should I have put windows 764-bit on this laptop - hp dv6000 2006 edition, came with xp?

    should I have put windows 764-bit on this laptop - hp dv6000 2006 edition, came with xp? Dual processor 1.7, 2gbs ram

  • Windows Explorer has stopped working error

    Yesterday, I tried to install a program on my computer that is running windows vista after that the computer has stopped working.  It starts go to the home screen and then the screen turns black with a white cursor you can move.  I can start the Task

  • Deny full control

    I accidenty click on deny full control to the administrator of local disk D, I can change it somehow? THX

  • Split Tunneling does not

    I'm working on an installation of the laboratory program at home with my X-5506, and I got a split tunneling configuration problem.  Every change I seem to give me internet access, gives me access to the local network or remove both.  The current con

  • Same problem different phone blackBerry smartphones

    I have a 8310 I read of similar problems, but with different models. each time my memory falls to zero, erase my messages, txt, emails, call logs and a few other things. This does not happen very often but when he does his pretty agrivating. usually