Problems to use the command/Extension

Similar Questions

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Could not complete the command because of a problem in using the Adobe color engine

  Hi all

  Strangely this began this morning - completely out of the blue - and I have no idea why.

  Configuration: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)

  Work on the exported images from LightRoom 4 (16 bit A3 Pro Photo RGB PSD) in PhotoShop CS5.

  As part of my image, classification process, I have a PhotoShop Action that performs the following operations: layer of copy to a new document (document meets all of the copied layer settings) > Image > settings > HDR toning > apply a certain "Preset" HDR > copy of resulting image in original doc > set opacity to 40%.

  Totally out of the blue, after having this action for about 2 months, this morning I start getting a dialog box warning "Unable to complete the command because of a problem in using the Adobe color engine" and the action fails. The failure seems to take place in the part 'do document' action and seems to be in some way related to the contents of the Clipboard.

  I tried trashing and recreating the action. It works to new first fine delay and then - on the following image - errors.

  At the moment I can only safely do the work 'manually' by filling all the actions myself.

  I see no parameters that have changed and the operating system has not been updated for a while.

  I found another thread on a similar problem in PhotoShop Elements, but no final solution.

  Any help appreciated because I have a shedload of things to deal with.

  Best wishes

  TP

  As I said: Image > duplicate.

  It also fail?

• iMovie 10.1.2 today (June 4, 2016), all of a sudden will not let me create a new project/film.  1. I have used the program extensively in recent weeks, many small travel films. 2. once in the projects, if create a new movie and the sign is checked, the op

  1. I have used the program extensively in recent weeks, many small travel films.

  2. when in the projects, if you click on create a new movie and sign, the new movie and trailer options opens successfully.

  3. click on film, nothing goes very well but open trailer.

  4. the issue seems to be the only new film/project.

  5. I can access all my other movies and run successful projects and theatre.

  6. I tried through a previous project and clicking new project from the menu, but still nothing.

  7 mac is 27 "OS X El Capitan, Version free 10.11.5, with 327 GB to 999 GB

  iMovie is 10.1.2

  8. the computer itself did not fall down and as FAS as I know, all other programs work correctly.

  9. I rebooted several times, but that has not solved the problem.

  10A does anyone else have this problem? If so, how do fix you it?

  Thanks much for any help!

  Have you ever tried to delete the iMovie preferences?  If the elements of the user interface do not, deleting preferences frequently you contribute.

  To delete the iMovie preferences leaving iMovie, runs, and then press and hold options and command key at the same time, at the launch of iMovie. Keep now pressed the buttons firmly until you see a command prompt to remove the preference. Confirm.

  

  Before you do, take note of all the settings that you made in iMovie preferences panel, so you can put back them later. iMovie will then begin with the Welcome screen.

  When I had a similar problem, the only thing that helped was to create an iMovie library.  Probably a corrupted in the iMovie project current library prevented the creation.   The problem persists, if you test different library in iMovie? You can create a library for testing.

  http://help.Apple.com/iMovie/Mac/10.1/#/mov3fa25bae7

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Can't paste the screenshots using the command C?

  Hi, I've always been able to take screenshots (command + Opt + shift + 4) and paste them directly in mac mail emails or Messages by using the command + c. lately I am not able, maybe since 10.11.4? I am still able to take screenshots but I am unable to paste them. They are now on my desk and I have to search for them and then drag - move which is more slow than before.  I also notice the same problem in photoshop CC 2015, that I can paste is more directly the screenshots but drag and drop them on the desktop.

  I don't know what is the cause. Everyone knows this and is there a way to fix it?

  Thanks for your help.

  Press the function instead of the Option key when taking the screenshot.

  (141973)

• First HP: help using the command CAS.solve (STRING1, STRING2) within a program

  Hello and hope you can help me with my problem!

  I write a somewhat complicated program (operating mode no case) who has a subroutine called STSOLVE where his entry is always a string from the main program that contains a formula as "'I' = 'V' / 'R', 'R'" and its goal is to replace all the variables contained in "" to the compatible standard CASE generated automatically variable (teiXX where XX is a unique number) and then use the command solve to assess this formula (say final temporary formula "tei1 = tei2 / ') tei3, tei3"). Before returning, he replaces the temporary variables, generated automatically with the original on the result, so the original formula will be sent back solved in the main program.

  My problem:

  It returns the result {UNDEF} or simply {} even in expressions that absolutely work if used with the command solve manually, in the main screen of calculators CASES when the CAS.solve command is used either! Even though I know that the entry of this order is correct according to the tutorials I've read in the forums, I can't work properly.

  I tried all methods of writing the order and I only managed to get a result when I wrote this:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, "tei2");

  .. .or RPART1 contains, say, the part 'tei1 = tei2/tei3' (NOT AS A STRING!) and "tei2" SHOULD be written as shown here, a chain, entered manually just for test (can be 'tei1' or 'tei3' too for this particular case). However, if I put "tei2" in RPART2 of local variable in the subroutine as a string and then pass this variable to the solve command, say:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, RPART2);  RPART2 contains the string "tei2", "tei1" or "tei3.

  Here again, I get a {} as a result!

  I tried so already a lot of things that I don't know exactly what mention here, but I hope I described the main situation enough to start detailed and of course, I'll give you any other information you might need to give me more help. I tried to paste the entire subroutine, or even the entire program, but I don't have any windows pc to connect the first HP and copy the program. I am writing from an Android Tablet and I should maybe type the everything here is not very easy, I will of course if you ask.

  Perhaps, I should also note that the generated vars tei1, tei2 etc. do not exist as variables in the calculator, but if I copy channels same as the program tries to run in the command CAS.solve and manually write in case screen (not a string of course) then they get solved without problems.

  Hope to get help and learn from you and I wish I could found more help about it online, but it seems very difficult and also all the tutorials I found on the cas.solve command in the programs did not work in my case!

  Andreas

  It works, or is this not the problem?

  CAS.solve ("tei1 = tei2/tei3", "tei2");

  I get output: {tei1 * tei3} which is correct.

• The list of permissions of the files using the command line

  Hi all

  My windows operating system is windows Server 2003 R2.

  Now, I'm trying to find a solution that can display all the permissions of the file of each folder and its subdirectory by using the command line syntax.
  I tried to use ICACLS to solve this problem, but its result contains the permissions of all files/folders. I just want to have the permission of files, not the permissions of each individual files.

  Is it possible to just show the permissions of folders with ICACLS? If it is possible, what sentence from command line?

  However, I also looked at Systinterals AccessChk and AccessEnum without finding a solution.

  If you have no good solution, please share with me.

  Advanced thanks.

  Hi Leo,

  The question you have posted is related to file permissions in Server 2003 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads

  Hope it will be useful.

• Install programs by using the command line?

  My computer will not install packaged with Bitrock Installer programs.  How to do this? I used the command line in the past, but I forgot how.  It must be installed all by activating not the installer to Bitrock.  Or what I can do for my computer compatible with the Bitrock Installer?

  Hi sallysantlerart,

  1. what program are you trying to install?

  2. what happens when you try to install the program?

  You can consult the following links to install the program by using the command line:

  http://msdn.Microsoft.com/en-us/library/aa372024 (v = vs. 85) .aspx

  http://msdn.Microsoft.com/en-us/library/Aa367988 (v = vs. 85) .aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• User names found using the command run "control userpasswords2" do not match my user accounts

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  I finally thought to it. They wore all the user names that came when I ran the command "control userpasswords2". As I said in my original post, user names in all the names of the Panel user control over all matching computers. The only conflict I've had was in the list of user names in the list found when I ran "control userpasswords2". I went to highlight the 'B' account after that I ran the command, you click Properties and changed his name to 'A'. This solved my access denied problem once and for all. Apparently he does not have all of the accounts in the control panel.

  Don

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Use the command line to call EX60/C40

  Hello

  I'm looking to use the command line or xml to call extensions of our EX60 and C40. I want to automate the call made by the devices. We use 9.1 CM and TC6.

  In addition, if someone knows if it is possible to configure ERA/Hot Dial so when a user picks up the phone on the EX60 it automatically connect an extension? I tried through dialing SIP and ERA rule in CUCM.

  Thank you

  Kaleb

  To dial the command line, you can use the command 'xcommand dial.

  xCommand Dial

  Dial a number from the system. Returns information on the CallId and ConferenceId, which are necessary for some other commands.

  Number: Enter the number or address.

  Protocol: Select the Protocol h.323 or SIP.

  CallRate: Fix a rate of call.

  CallType: Select the type of audio or video call.

  BookingId: any identifier that an external booking system (e.g., TMS, CTS - MAN) can use for its own references to match calls placed with the internal identifier systems of booking for a meeting. This can be any string, for example, a GUID. The reservation Id will be provided in the call connects, events of appeal etc. for the call.

  Requires the user role: USER

  Parameters:

  Number (r):
  Protocol:
  CallRate:<64..6000>
  CallType:
  BookingId:

  Example:

  xCommand Dial number: 543210 Protocol: h323
  Ok
  * r DialResult (status = OK):
  CallId: 2
  ConferenceId: 1
  * end

• When I use the command tools Auto in PS6 Layer turns white?

  When I use the command tools Auto - auto tone, contrast, or color - in PS6 BG layer to become white?

  Try resetting all the Photoshop tools. If that does not resolve the problem, try resetting your Photoshop Preferences in Photoshop preferences