Problems using new images

Similar Questions

• Problem using the image of the bridge processor

  I have been using Image Processor to process pictures of the bridge for some time. However, I recently received an error message when I try to open the bridge Image Processor, and I was not able to find the help topics that deal with my problem: I selects images in Bridge to process, and then click on "tools > Photoshop > Image Processor. Photoshop opens and the familiar image processor dialog opens. 1 in the says 'The bridge only process files' dialog box and the number of files I selected in parenteses. I select the file type and other parameters in #3 and #4 preferences. When I click "Run", I get an error message window that says: 'Script alert. There is no source file that could be opened by Photoshop. Image Processor works if I open the files in Photoshop first, and then run it by selecting ' file > Scripts > image processor ' and tell him to deal with all open files.

  Someone would be able to help me with this problem?

  Thanks, Larry

  Usually when it worked before and not now and you have not added any new software or hardware, I recommend you to reset the preferences.  Hold down the CTRL key and click the bridge to begin.  You should get a window to reset with 3 options.

• Satellite L350D-21 problems using new HARD drive recovery recovery disks

  Hello

  I have laptop SATELLITE L350D-212 with windows 7 Home premium OA.
  He started to complain that there is something wrong with the hard drive so I went and bought another hard drive of the same size.

  I created the recovery disk when the computer was purchased and have backup of all the data in an external hard drive.

  After I changed the new hard drive to the laptop and tried to boot from the recovery disc, nothing happens eventhoug I can see it seems to be all Ok with the disc.

  Any ideas on how to get to run to the new hard drive recovery?

  I have the old hard drive attached as external drive via the USB port, but cannot boot from that too. It just stops at a certain point and told to stop.

  Hello

  Usually, the recovery disk must format the new HARD drive but I recommend you to join the new HARD drive as an external device to another computer and format the new HARD drive before trying to recover the laptop.

  Once the HARD drive has been formatted, connect it to the L350D and boot from the recovery disc

  Good luck

• Problems Burning ISO image Windows 10 on my new laptop to use on an old.

  I'm burning my copy of the image ISO of the download of MS windows 10 earlier today.  I stored the files windows 10 initially on USB.  then I used the tool to create a dvd disc for installation later on my HP 15 currently running windows 8.1.  I have no reason to upgrade now on my HP machine because I finally got past this huge problem I had with the update of security very great for 8.1 - or at least for the moment I have.  But I think that I need the image Iso to recover my Dell Inspiron 14 crashed, which has windows 7 Home premium and a pretty big OS problem that I have any solution online, I can find with no real possibility to recover.  I managed to start in safe mode, but there are nomore rstor oingts and checking disk Startup Repair is unable to complete or correct the errors.  That's why I put it through a factory restore/reset and I sat it here now in the living room, on the screen of advanced recovery and I thought that the next step is to change windows 10 and use the image recorder to make the ISO boot dell image and install the windows 10.  But now my HP with 8.1 gives me an error message saying: he can't burn the image to the blank DVD R I put in to burn the image on.  the error code is Ox8007045d.  I have two questions... first how to solve this error and the second will be this plan I have to get my other computer running work?

  To fix a specific version of Windows, you must have the disk of resettlement for this particular version. A disc of Windows 10 cannot repair Windows 7 or Windows 8.1

  It is possible that you have downloaded a corrupted copy of Windows 10. I suggest that you try to download the. ISO using the tool of creation of media:

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

    See the instructions: How to download official Windows 10 ISO files

  also:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

• To download to the remote server using FlashFXP: new images will not upload. [was: Question]

  I use Dreamweaver CS4 in my school.  We create the Web site using a local drive and use FlashFXP to upload to a remote server.  Suddenly, the new images we have inserted on the site will not transfer.  The show upward in mode live view and when test us them in different browsers, but will not transfer out of the queue and will be not displayed on the Web site.  It is only with the new images we have created; Download all the old images.  Something is corrupt in our records, our code, or is FlashFXP?

  This looks like a problem with permissions on the server.

  Looks like that is not allowing you to replace the files that already exist.

• I need a new Image of XP because my expired original but when I downloaded it again, the new XP said its has expired, too! I thougt of caching problem of virtual machine manager, but I'm not sure.

  VHD expired

  http://t.co/exzliimb - where I downloaded the XP VHD of

  http://t.co/8vhbKuzu - error screenshot

  I need a new Image of XP because my expired original but when I downloaded it again, the new XP said its has expired, too! I thougt of caching problem of virtual machine manager, but I'm not sure. I deleted all the VHDs before you download again. Any ideas?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information helps.

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Don't want new tiff files saved in my catalog if I'm only using the image of a composite.

  During the edition of Photoshop CS4 of LR3, the new fit will not appear in the catalog unless I have save in PS. In the LR4, it saves a new tiff in my catalog without worrying if I save the image edited in PS or not. I have a library of clouds, I use often and don't want new files saved in my LR catalog if I'm only using the image open for compositing. Can someone help me understand how to change the workflow to resemble LR3?

  The behavior of LR, create and save a TIFF file is automatically used when LR and ACR do not run a version of equal. In order for Lightroom to be able to place an image without creating a TIFF file saved the LR and ACR version must match. This will be possible until CS6 and cab 7 fate PS. Then when LR RTAs versions and match, Lightroom image from Camera Raw to make in Photoshop using a thing called 'bridge Scriot"LR tracks to open the file in Photoshop. If you don't save it, LR knows and no file is added to the catlog. If you save or you save as in Photoshop, Lightroom knows and adds this file that you saved, regardless of where it was saved.

  So, again, there are two fundamental behaviours of Lightroom. If LR and ACR match, LR titles the image where (if) you save. If LR and ACR are out of phase of pf, Lightroom renders a file TIFF is saved before sending it to Photoshop. And no, ACR 6.7 does not count as in sync with LR4... 6.7 the cab is a stop gap measure to allow users of LR4 open images with parameters of PV 2012... It will not be until you get 7 ACR in CS6 you will get optimal integration between LR, ACR and Photoshop.

  BTW, this behavior is consistent across all versions of LR/ACR for LR2.

• 46YL863: change TV channels - delay before the new image appears

  Hope someone can advise me please on an "issue" that's appeared recently with my 46YL863 TV.
  I say 'problem' rather than problem in case it's something to do with my settings, which is the cause.

  When I change channels I notice that there is a delay of several seconds of the current image to the new. I narrowed down it to this happens only when you switch from a HD channel to a one SD card, or from a SD card on a HD.

  In these circumstances the screen will first black, then blue and after a couple more seconds the new image of the string will appear.
  Switch between HD or SD channels and the new image appears almost immediately.

  This happened before the last two days, so either a fault has developed or I changed a setting in some way.

  I tried other plugs of HDMI input and the situation is the same.
  Any suggestions please?

  Thank you.

  > I tried other plugs of HDMI input and the situation is the same.
  This means that you are using an external decoder which receives signals from TV?

• You cannot activate and use CANON Image Browser EX

  Title: CANON original Image Browser EX

  01/03/2013

  Windows 8 (no touch) HP Envy 23 all-in - One PC.

  Trying to install CANON Image Browser E.G.  IBXW_INST_1_1_018_U02_9L.  I get 'Image Browser EX icon' on the desktop.  When activated it will be single charge to 80% and then stall.  I installed Microsoft Silverlight 5 - followed to uninstall MS Silverlight 5 - new reinstall MS Silverlight 5.

  Several times I get the message "Silverlight 5 cannot be installed correctly.

  "Edge".

  GeraldSchuler

  Hi GeraldSchuler,

  Thank you for choosing Windows 8 and give us the opportunity to help you.

  After the description of the question, I understand that you are unable to activate and use CANON Image Browser EX which you have recently installed on the computer.

  Don't worry. We will certainly help you to solve the problem.

  I suggest you to follow these steps to solve the problem of installing applications and check.

  Step 1:

  I suggest to uninstall CANON Image Browser EX, then run the patch for uninstall of an application and then install the applications and check. Here is the link to run the fix it.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Step 2:

  I suggest to uninstall Silverlight 5 and then install it by following the steps in the article. Go through the link for your reference.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523?WA=wsignin1.0

  If you have other questions related to the installation of CANON Image Browser EX or Silverlight, feel free to get back to us. We will be happy to help you.

• No preview image deployed when you try to import new images, no possible imports all the

  Hello

  I use Lightroom 5.7.1 on a 'Late 2012 iMac' with Yosemite OS X.

  I installed Yosemite first and then Lightroom 5.

  After that I encountered the first problem (no preview images shown the import module when you try to import new images, the central part of the screen remains black, now shaded not extracted, nothing, no possible to import at all), I tried all possible changes to checkboxes and preference settings.

  After reading dozens of Internet Forum articles on very similar problems seem to many other users, I even deleted all preference setting files in the OS X Finder (a recommendation that has been said to succeed), however, the problem remains.

  Also, I completely deleted the software entirely from my iMac (including all the system and setting files), downloaded the latest version (5.7.1) Adobe, rebooted the system, installed new Lightroom, even restarted again, WITHOUT SUCCESS.

  What could I do? As I can't work at all with Lightroom, I would be very happy to get any help on this issue.

  Best regards

  Thomas.

  If the Destination Panel does not appear.

  You must make the Destination panel displayed on the right side by right-clicking one of the other items Panel (like "file management") and then place a check next to the Destination

• New images do not appear when you download [subject edited by Moderator]

  So, maybe it's a matter of delevoper although I can't understand why it happens at all!

  Here are my steps:

  1. I design work in Photoshop and use Photoshop for the bracket
  2. I create the template in Dreamweaver (2014)
  3. I create the style sheet (css)
  4. I place images and text and never deviate from the style sheet
  5. I have applied the model to different pages.
  6. I check my links
  7. I check the site in integrated browsers, i.e., Safari, Chrome and Firefox
  8. I opened my host access panel, download the files in my public record in accordance with the instructions, check if it have download

  It worked perfectly the first time that I uploaded to the site in this way. The problem began to develop a month ago. For example, the model of photoshop has a background slice (content_bkgd.jpg & banner_bkgd.jpg). In November, I added that little Christmas in the background in Photoshop work (at the top of the flow in the features tree - like slice fell). But downloading the background changed to host meet failure as do all new images. I checked everything I could imagine: I download the stylesheet changed, do I have to download all the images changed, files. I asked the host to see if the new files do not by chance ended up in the wrong file, did indeed upload: the host has no idea. Sometimes people who looked after the query has managed to correct the problem within minutes saying that its just one of those things! B@UT most of them say there is a problem of developer - any suggestions anyone?

  What the host is trying to say (I think) is the same as any host tells a new hosting account owner. Is that all Web sites should go in the folder root to the web hosting account. This includes files * and * folders. So if you have a folder in your local site called 'images' then this folder should also be on the remote server in the same place as it is in the local site. In fact, the hierarchy of the files/folders that you see when you connect to the remote server must be identical to the file/folder hierarchy that you see in your local site. If this isn't the case, then you'll exactly the symptoms you report.

• Problems using preset animations of the bridge

  Hi all

  Use the CC range and recently had a new problem using the animation preset from Adobe Bridge. I am in After Effects as usual and then go to the animation drop-down menu, click on Browse recent presets to open the bridge, and then as a use normal bridge to select the preset I want. Double click it while emphasizing my piece selected in AE, and AE then says this:

  

  And even error codes no matter what effect/animation I choose, if his image, video or text.

  If I just go a little in AE, my recent animation preset and choose one of there it loads up absolutely perfect. But it's embarrassing massively.  Any ideas? This problem appeared out of nowhere.

  This is fixed in the 2014.2 effects after update (13.2), which is now available.

  Details here: http://adobe.ly/1IVopxh

• How can I add new images to the layers panel?

  Hello

  I am brand new with photoshop elements 11.  I'm having a problem understanding how to import new images in the layers panel.  If I type "create a new layer" all that I get is an empty layer.  I want to do is to import an image where I'll cut part of it and layer it on another image.  For example: of lets say I want to put a picture of myself in front of a tree.  I want to take the image myself from a photo and he sleeps on the photo that has the tree on it.  How can I get both of these images in the layers panel even?  I can get the picture of me in the layers panel as layer #1, so I can cut myself out of the picture.  My problem is when I try to import the picture with the tree on this subject, it opens upward in a new tab.  If I try to hit 'create a new layer', only a white layer appears above my first coat.  I tried to drag the new image on the layers panel, but will not join.  All the tutorials I could find and monitor, have already all the images they work with pre-loaded in the layers panel.  I just need to know how to get my pictures in the Panel, so that I can start working with them.

  Thank you in advance for any help you can give.

  Glen

  P.S. I'm working on an iMac 2009

  After selecting, you press Cmd + J and which will put the selection on a new layer.

  Drag your tree to the top of the location of the project in the main image window.

  Organize layers for example you may need to drag the tree stratum under the layer with yourself.

  See my tutorial that uses a background solid colr.

  http://forums.Adobe.com/message/4166187#4166187