Problems with Alienware Aurora R4 Windows 10

Similar Questions

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• I have a problem with photoshop cc in windows 10

  Hello

  I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

  I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

  

  

  
  

  
  

  I really hope that anyone kno w s, what the problem is and can help!

  Hi Editjo,

  Greetings!

  This seems to be a graphics card problem.

  Please disable the graphics processor in photoshop, and then try again.

  Open Photoshop

  Click on edit-> preferences-> Performance

  Uncheck use graphics processor

  Click OK

  Close Photoshop and re - open and then use the way you did that.

  Also, please share the exact version of your Photoshop.

  Concerning

  Jitendra

• problem with photshop cc monitor windows 8.1 k and 4 to a resolution of 3840 x 2160

  can anyone help

  I have a problem with photshop cc on windows 8.1 and 4 k display to a resolution of 3840 x 2160 when I launch photoshop cc, everything is very small and I don't know how to get the program to the right size

  Install Photoshop CC 2014 and turn on the preference of the user interface scaled by 200%.

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Problem with WiFi connectivity in windows 8.1

  Hello

  I have problems with my Wifi on my HP Pavilion 15 Notebook (product number: G2H02PA-#ACJ)
  I have Windows 8.1 as well as Ralink RT3290 802.11bgn Wi - Fi adapter.
  
  My Wifi connection says LIMITED connectivity. I've already complained about my problem on the HP support by phone. But I don't have any solution for my problem. Technician a driver wifi re-installed and the Bios but did not get any solution. Customer support sent me some links to update the driver but not got any solution again.
  I tried to install different versions of drivers for card Ralink WLAN ! Still without success!
  I am writing this post from my other laptop that my wifi router running on other devices!
  
  Pending a solution so that I can use internet on my new laptop computer.
  
  Thanks in advance for any solution.

  I also had this problem and corrected.

  To correct the problem of wifi... open charms bar... in the search window, type device manager in Device Manager... double click network adapters, right-click right on... Qualcom Atheros QCA 9565802.11b/g/n wifi adapter... right click and click on uninstall.

  A pop window should open asking you to confirm. Confirm by clicking on... Ok.

  After that, restart your laptop.

  Your wifi should be visible in the networks. You can then connect to your network of your choice.

• Satellite L505D - problem with mode standby in Windows 7

  It's me again, in the last thread:

  "Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)). "

  The mode 'sleep' worked perfeclty for a few days and it's still gone... What more when I try to enter the mode "sleep" I can't do anything on the laptop, it still works on the white screen and the transformers fan works high speed. In recent days, when the "sleep mode" worked, windows has no update...

  I don't know what is happening... :) Weird problem, isn't?

  It is not easy to say why this is happening. In your last post, you wrote about some updates of windows. Who knows what's wrong there.
  If nothing is done, not even system restore and you want to use the standby mode I recommend you save all your data and install the new OS by using recovery mode.

  With the settings everything's going to be OK but then be careful with updates.

• Problems with split for VLC window view

  I'm trying to break the window of vlc for the side of the desktop by pressing the button expand for a long time. However, the snap of the VLC window generates a full size black screen. Why is this and how to fix this?

  Using OS X El Capitan, VLC 2.2.1.

  Thank you.

  VLC is not an Apple product. Only its developers, who I think are here:

  http://www.videolan.org/support/

  can solve problems with it.

  C.

• Satellite P100-487: problem with audio drivers for Windows XP Home 3.11.0.51 - entered

  Hello

  I have problem with this audio drivers 3.11.0.51. The problem is that the output works perfectly but there is no entry.

  When can I expect from the good work on Toshiba support drivers?

  My way to have entry and exit works well is: first install 3.11.0.51 drivers from Toshiba site to install Support Intel 3.14.0.50 and do not restart after the installation. It's hard because every time when I restart the PC I have to for this making begin.

  Anyone have the same problem and found another job drivers?

  Thank you

  HI Supportneeded,

  You gave me the trick with the driver to resolve the problem in the next restart.
  And I replied to your thread Thursday evening at 20:30. Ask you Toshiba phone when we can expect new drivers. (I have a Satego P100-10F) I added a complaint of litte that Toshiba should also support a 'old' OS like XP. And after that at 21:00 the detachment was completely absent.

  Anyway, I tested some drivers of other manufacturers and other Chipsetdrivers, still the same problem.
  the sound with this material does not work on XP due to a rather bad.

  Of course, toshiba brings out a new driver that will feature at the end of February, but now it is March and I see nothing. (stop: a new driver for Windows Vista is online since yesterday)
  I had it installed on xp and the sound is completely down. Whether in - or output.

  you already called toshiba support when they expect our problems?

  Greetings

  [Edited by: admin on March 17, 2007 17:03]

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• Scanner driver problem with - 8.1 to Windows and HP L7680 AIO

  Hey folk,

  I have a problem with my HP L7680 AIO.

  I did an upgrade to 8.1 Windows x 64

  I have install the driver real 14.8.0 version.

  The printer works but the scanner hurts.

  When I begin a scan I get an error message and the scanning process is cancelled.

  I have this error message with photoshop, HP solutions and any other scanner software.

  Printing HP and doctor Scan says I have to contact support.

  Here I am all idea?

  Either way, I disabled my Antivirus software during installation.

  Thank you very much.

  Greetings

  Markus

  Hello

  I solved the problem by myself.

  For people who have the same problems...

  It was the prevention of intrusions by more Portscanner antivirus.

  I could adopt new the situation with other systems, and this is the reason why I say that it was definitely the Portscanner.

  The fool is the AV-Suite of disabling showed no effect.

  Only after that I put the settings in the AV suite that IPS should not control the ports everthing works fine.

  Things difficult, but now it works...

  See you soon

  Markus

• I bought Lenovo G550, 6 months before and now I m is problem with key product of Windows because of the striped top, so please tell me how it would be possible to get this product key

  I bought Lenovo G550, 6 months before and now I got problems with my PC and have problem with the Windows product key due to scratch on it, so please tell me how it would be possible to get this product key.

  Behind my laptop, here is a sticker mentioned
  Proof of license
  Certificate of authenticity
  Microsoft
  Microsoft Corporation @2005
  X 15-53803
  and on the bar code is mentioned after the number.
  00.94 - 893-397-158
  Product key. M... 62-8GX88-69-... - f7b

  Hello BHASKARPIYA,

  Product Key Finder programs, if someone advises to use, is found only on your operating system preinstalled a Levono multiple factory facilities and will be of no use in these circumstances.

  You will need to contact Lenovo and request their assistance.

  Or a way around this is to buy a Lenovo recovery DVD to reinstall the operating system or use the built-in recovery Partition containing an image of your OS and reinstall Windows like that.

  No method requires a product key to be entered by you.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html