Problems with canon t6s and lightroom 4
I have lightroom 4 and I just bought a canon t6s and when I transfer all my raw photos it says that is not supported and I can't see my pictures, but I can see in the photo of my Mac app... What should I do?
LIghtroom 6 works well for most people.
5 Lightroom can't read the RAWs of your camera.
Tags: Photoshop Lightroom
Similar Questions
-
Problem with Canon printer and scanner.
My Canon MP610 printer suddenly stopped scanning, which gives the message "scanner driver supported by this software is not installed." Install and then try again"
After trying a few things, I finally just uninstalled and reinstalled, using the installation CD and then following the instructions in
I did it several times now but all without success. The printer prints, but the scanner gives the same error.
Any ideas? I am running Win 7 Pro 64.
Hello
If this isn't a driver problem there is a problem of setting or material and you
need to contact Canon.As Canon OEM is responsible for the proper functioning of the printer/scanner
and their drivers. Check with Canon support, their documentation online.
and drivers.Good luck, you need to update or reinstall the latest driver.
Canon - PIXMA MP610 - software and drivers<- select="" your="" version="" of="">->
http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp610#DriversAndSoftwareCanon - Support and drivers
http://www.USA.Canon.com/Cusa/support/consumerCanon - Support - contact us
http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumerCanon - Windows - Vista and Windows 7 support
http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupportCanon printer - page local confirmation - could be from another region.
http://pdisp01.c-WSS.com/OS/====================================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hi all
I just had a software problem with my mac and had to reinstall everything using Apple. One problem, lost lightroom 5. Apple said that the code of the address has changed. How to recover my photos or have I lost?
At soon Pete J
Hi Pete,.
You can install Lightroom via this link:
However, to get the rear changes you have previously done in Lightroom, you need to get the backup of your previous Lightroom Catalog.
Store you the backup of your Lightroom catalog before recharging your Mac OS?
Kind regards
Claes
-
having problems with graphics acceleration in lightroom with card amd 2015 running drivers latest
having problems with graphics acceleration in lightroom with card amd 2015 running latest drivers. It crashes every time that you do something to make anything with acceleration for example. develop module or turn it off
Version of Lightroom: CC 2015.1 [1025654]
License: Creative Cloud
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601]
Application architecture: x 64
System architecture: x 64
Number of logical processors: 6
Processor speed: 2.8 GHz
Built-in memory: 16383,3 MB
Real memory for Lightroom: 16383,3 MB
Real memory used by Lightroom: 841,5 MB (5.1%)
Virtual memory used by Lightroom: 853,0 MB
Memory cache size: 261,4 MB
Maximum thread count used by Camera Raw: 6
Camera Raw SIMD optimization: SSE2
System DPI setting: 96 DPI
Composition of the Bureau enabled: Yes
Exhibition: 1) 1600 x 900, 2) 1600 x 900
Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.
Graphic processor News:
AMD Radeon HD 6800 Series
Check the supported OpenGL: past
Vendor: ATI Technologies Inc.
Version: 3.3.13397 context 15.200.1046.0 the base profile
Renderer: AMD Radeon HD 6800 Series
LanguageVersion: 4.40
The application folder: C:\Program Files\Adobe\Adobe Lightroom
Library path: K:\hdd\photos\Lightroom\Lightroom Catalog.lrcat
Settings folder: C:\Users\nathan\AppData\Roaming\Adobe\Lightroom
Plugins installed:
(1) Behance
(2) substantive canon Plugin
(3) Facebook
(4) Flickr
(5) irista
Config.LUA flags: None
Map #1: Seller: 1002
Feature: 6738
Subsystem: e178174b
Revision: 0
Video memory: 1011
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Corsair Gaming H1500 helmet)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: not initialized
Direct2DEnabled: false
GPUDevice: not available
OGLEnabled: true
You can disable the GPU manually by changing the preferences file to LR with a text editor such as notepad and change the line useAutoBahn = true to useAutoBahn = false. You do not want to do with LR does not.
On Windows, the LR file is located here:
C:\Users\- yourusername -\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs
You could make a backup copy of a file agprefs on your desktop, firstly, in the case where mess you something.
-
First Pro CC with Canon T6s workflow
My name is Joe Hamm. I'm a jazz musician and become a filmmaker as well. I made a short documentary film which has contributed to my organization and my area sell to potential donors and build boards. I made this film using all material borrowed and learned from watching a lot of documentaries and to spend time on YouTube tutorials to learn editing techniques.
Most of this was shot with a Canon XA10 I borrowed.
Beyond the music: soundscapes, El Sistema and the power of music - YouTube
Since then, I received requests for making movies for similar programs throughout the country. To reduce my costs, I finally bought a Canon T6s and am currently training on the subject. Soon I will start making movies again with the highest quality, that I was never able to accomplish.
Here's my current workflow. I'd appreciate your comments to help me improve the quality of the image.
Canon T6s, 18-135mm lens. Shooting at 23.98 FPS, FHD 1920 x 1080
1. capture video sequences
2. slide the MP4 files to Video folder on hard drive
3. import into Media Encoder and convert to ProRes 422 (LT)
4 import. In first Pro CC MOV files
5 merge audio recordings and replace audio source
6 edit
7. apply the color corrections
8. export to YouTube 1080
9 download on YouTube
Thanks for your ideas and your recommendations!
You have a good start. I don't know how 'our' ideas will improve the quality of the image, but "we" can certainly help not the time it takes to go from 1 to 9 on your list.
For your projects, I might suggest using prelude on ingestion... you could navigate to the media card reader, rub it to make sure what you want really... then set up a quick process to rename the clips for a work, copy the renamed original media to archive or backup file, transcode the same renowned media in your folder of work and of course add metadata at the same time you have need. ProRes422 (LT) is a correct choice for transcoding, but I might suggest Cineform 10-bit YUV... it's totally Visual lossless (especially with the media you use) and FLEET through the CPU used when editing.
The sound that you have on your example is pretty decent... nice work. Most people get obsessed with pictures... and then find that without good sound, you might as well fuhgedaboudit. Good solid and adequate image is ok... Imaging good and bad sound is just useless. Don't know how you have managed this, but it's quite nice. Quite often the process is to get your low edit including say noise belonging to sections of voice-over added separately or used cams, and all the time that you have 'Edit locking' you send sound or hearing to do the necessary cleaning for sound media used.
At roughly the time this color correction/grading themselves. Once again, only for the media on the final sequence.
My only thought about the quality of the image... it's the 18-135 lens is convenient, but not necessarily the most beautiful image-creator you can get hold of.
Neil
-
I have a problem with Canon PowerShot SX 60 HS-vamera wirh Camera Raw in Photoshop elements 12, cannot open raw files. I have the latest version of camera Raw plug in, what is the problem?
It's on our radar and hoping to incorporate it in a next update.
As soon as it is available, it will be updated in the article.
http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html
~ David
-
Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpgwhith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.
any idea?
Thank you
Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do... -
Satellite Pro C650D - problems with the audio and game controllers
Hello
I recently had problems with my microphone and speakers/headphones and game controllers.
Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.Stakeholders sometimes still work when I connect headset.
Some of the sounds are still coming through the speakers while some coming through the headphones.I have a usb game controller which also did not work everything properly.
If I assign buttons in the program that they do not work in the game.All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.
Any body have similar problems or know what to do better?
See you soon
LaurinHello
Can you please send some details on the laptop model and the system you are using?
With regard to the issue of sound/mic:
> The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.Are you talking about internal microphone or external? This only happens using Skype?
In your case I would test the microphone using different applications to make sure that is not a Skype related issue.> Yet sometimes the speakers work when I connect headset.
I recommend this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
She wrote:
+ In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
+ There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. ++ So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+
Regarding the game controller:
> I have a usb game controller which also did not work everything properly.
> If I attribute buttons in the program, they do not work in the game.
I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller. -
How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back
Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.
Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.
I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.
For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles
-
Problems with wifi, bluetooth and gps in my iphone after updating iOS 6
After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:
-By doing a reset network
-Do a reset total and restore my phone
-To restart my phone twice.
-Audit and third-party applications unnistalling
Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.
Please fix bugs fast.
Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.
-
HP 15 laptop: problem with the touchpad and the key "stuck."
Hello!
Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
Thank you in advance for your help!Welcome to the HP support community @gouch3.
I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.
Have you tried to use a keyboard external and mouse at all?
Have you tried to go to Safe Mode to see if the problems persist in there?
Have you tried to perform a material or forced reset Reset?
Did you do a test of material?
Have you updated your drivers?
gouch3 wrote:
... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.
I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:
- Beginning
- Search for Device Manager
- Search results, open Device Manager.
- Click on display
- Show hidden devices.
- Click the arrow next to keyboards.
- Right click on the name of the keyboard device.
- Select uninstall.
- Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
- Restart the laptop twice.
Touchpad:
- Type of research, "Device Manager."
- Click on Device Manager,
- Expand mice and other pointing devices.
- Right click on the TouchPad,
- Click on uninstall.
- Restart the computer laptop twice,
- Reinstall the TouchPad card.
I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.
The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document.
Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.
This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.
If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)
Thank you!
-
Problem with the report and the system of axis 2d
Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.
What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).
With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.
I tried everything, but I could not remedy
I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)
Any help will be appreciated, thanks in advance
Ierman
I'll post my code here:
Dim Xscale, Yscale
XScale = Array (0,25,0,5,49)
Yscale = Array(-0.2,0.2,-0.2,10,4)
Call PicDelete()
Call GraphObjNew ("2D-Axis", "2DAxis1")
Call GRAPHObjOpen ("2DAxis1")
D2AxisTop = 1D2AxisBottom = 70
D2AxisLeft = 1
D2AxisRight = 1
Call GRAPHObjOpen ("2DYAxis1_1")
D2AxisyScaleType = "manual".
D2AXISYBEGIN = Yscale (0)
D2AXISYEND = Yscale (1)
D2AXISYORIGIN = Yscale (2)
D2AXISYTICK = Yscale (3)
D2AXISYMINITICK = Yscale (4)
Call GRAPHObjClose ("2DYAxis1_1")
Call GRAPHObjOpen ("2DXAxis1_1")
D2AxisxScaleType = "manual".
D2AXISXBEGIN = Xscale (0)
D2AXISXEND = Xscale (1)
D2AXISXORIGIN = Xscale (2)
D2AXISXTICK = Xscale (3)
D2AXISXMINITICK = Xscale (4)
D2AxisXTxt = ""D2AxisXColor = 'black '.
D2AxisXTickAuto = 1
D2MTickLineWidth (1) = 0.1
D2MTickLineType (1) = "solid".
D2AxisXTickSize = 60
D2AxisXTxtAutoCo = 0
D2MTickColor = "red".
Call GRAPHObjClose ("2DXAxis1_1")
Call GraphObjNew("2D-Curve","New_Curve")Call GraphObjOpen ("New_Curve")
D2CCHNX = "[1] / [1]" "
D2CCHNY = "[1] / [2]" "
D2CurveColor = "red".
Call GraphObjClose ("New_Curve")
Call GRAPHObjClose ("2DAxis1")Dim Xscale1, Yscale1
Xscale1 = Array (25,50,0,5,49)
Yscale1 = Array(-0.2,0.2,-0.2,10,4)
Call GraphObjNew ("2D-Axis", "grafic")
Call GRAPHObjOpen ("grafic")
D2AxisTop = 40D2AxisBottom = 37
D2AxisLeft = 1
D2AxisRight = 1
Call GRAPHObjOpen ("2DYAxis1_2")
D2AxisyScaleType = "manual".
D2AXISYBEGIN = Yscale1 (0)
D2AXISYEND = Yscale1 (1)
D2AXISYORIGIN = Yscale1 (2)
D2AXISYTICK = Yscale1 (3)
D2AXISYMINITICK = Yscale1 (4)
D2AxisYTxt = "" ' testo asse label y
Call GRAPHObjClose ("2DYAxis1_2")
Call GRAPHObjOpen ("2DXAxis1_2")
D2AxisxScaleType = "manual".
D2AXISXBEGIN = Xscale1 (0)
D2AXISXEND = Xscale1 (1)
D2AXISXORIGIN = Xscale1 (2)
D2AXISXTICK = Xscale1 (3)
D2AXISXMINITICK = Xscale1 (4)
D2AxisXTxt = «»D2AxisXColor = 'black '.
D2AxisXTickAuto = 1
D2MTickLineWidth (1) = 0.1
D2MTickLineType (1) = "solid".
D2AxisXTickSize = 60
D2AxisXTxtAutoCo = 0
D2MTickColor = "red".
Call GRAPHObjClose ("2DXAxis1_2")
Call GraphObjNew("2D-Curve","New_Curve1")Call GraphObjOpen ("New_Curve1")
D2CCHNX = "[1] / [1]" "
D2CCHNY = "[1] / [2]" "
D2CurveColor = "red".
Call GraphObjClose ("New_Curve1")
Call GRAPHObjClose ("grafic")Hi lerman,.
Here is an edited version of your code that works on my computer. A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels. The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.
Brad Turpin
Tiara Product Support EngineerNational Instruments
-
Problems with Windows Update and load XP SP3
I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data. Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression. I tried the MSRT and FixIt nothing helps. I checked services.msc to see all the required services are enabled or started. I read that some malware will be stop some services without notice.
After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs. My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads. I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans. Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details. My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3. I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:
KB954550-v5
KB932823-v3
KB915800 v4
KB884020
KB926239
KB2618444 (Windows IE8 security update)
I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request. I'd like some useful suggestions. Thank you and happy new year!
Thanks for the quick response. I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007. Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush. Even for IE7 so I am not able to drop back to all recommend you. I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions. Stay tuned.
It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.
-
Problems with the date and time - have to reset the date & time on reboot
original title: problems with the date and time
Whenever I turn on my computer (Windows XP 2002) I click on F2. Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer. Can someone tell me what I need to do?
You need to replace the battery in time clock (RTC) real of your computer. It can also be called the CMOS or BIOS battery.
Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner. There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.
Whatever the expense, almost all of these batteries are easy to replace.
To get help, post back with the brand and model of your computer.
-
Hello
I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images (ie the rotating EGTC)
Now, I see the image preview and it disappears to the flower, so I did not see one of my photos
Some would like TO help on this im so not good with this kind of thing.
Appreciate it in advance
Let
Hello
- When you change the format of images of?
- What is Windows Explorer or Itunes?
Try the TV activation
Enabled and disable the Option 'show window previews (thumbnails) '.
a. right click on the taskbar.
b. Select Properties.
c. check show window previews (thumbnails) "Option. .
Maybe you are looking for
-
Salvation; I'm wanting to get away from chrome, but in firefox, I can't get the 'hangouts' working in gmail, even if I do not have the googletalkplugin installed on my pc. Another issue I see is that, on some pages, video does not work; in the latest
-
Hi all I thought of a great way to make automatic adjustments on a random number of data types in a table 1 d: So I have a loop for that to lets say a table 1 d of waveforms as input. I want to be able to adjust the gain, offset, and enable/disable w
-
The temperature of my CPU is fine at 98F but the motherboard shows 263F. Is this a problem? I opened the computer and the fan works, so I was wondering if I was headed for a crash.
-
An unknown error has occurred. Account: 'mail.homeloansokc.com', server: 'mail.homeloansokc.com', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133 the previous message is the complete error message I get when trying to open Outlo
-
My blackberry 9320 blackBerry smartphones won't let me Watch youtube videos?
Did someone know a way to make my phone watch videos of youtube on the youtube app he repeats his blocked or something like that?