motherboard temperature

Similar Questions

• HP Compaq 8510W/30 5 motherboard temperature Zones

  Does anyone know what are the temperature sensora different re on the HP 8510W/30 5 mother? "CPUID Hardware Monitor" using I see TZ0_, TZ1_, TZ2_, TZ3_, TZ4_, TZ5_, Local and Remote1.

  I'm getting pretty high time on TZ5_ (100 c), TZ2_ (90 c) and Remote1 (90 c). I cleaned the fan & pipe fins, even cleaned the old dried heat sink compound and apply the new compound, but with no improvement.

  So, if anyone knows what are the areas of temperature (or where the aks thereon), please let me know.

  Thank you!

  I have to assume that these temporary zones are on the graphics processor card. After having poking around, I found that the heat pipe was too hot to the touch on top of the chip, but cool in the fins of the fan. I thought that it should not be moving heat and it was bad.

  I found a used one on ebay and after installing, all times remain in the range max 60 c and the fan is now calm.

  The part number for the heat pipe is 452227-001.

• Cooling fan does not work on Satellite Pro A300

  Hello world

  I was asked by a friend to repair their Satellite Pro A300, because their CPU cooling fan had stopped working even during the start of the POST and the laptop could overheat and shutdown. So I thought it might one of three things:
  # Fan is obstructed by dust or dirt
  # Rolling fan failed
  # Fan power cable was loose

  So I disassembled the laptop and cleaned the fan/radiator with compressed air and check the connection of the supply, which was solid, but this does not solve the problem, so I replaced the fan and the heatsink with another that I knew worked from the same model laptop that had a motherboard fault due to the bug of password to start random bios (out of warranty) but still no joy.

  I'm starting to believe that the fan was perfectly fine rather motherboards temperature of the processor or the sensors that control the activation of the fan has failed.
  Am I correct in thinking that it is essentially, irreparable without specialized tools and my friend will be content themselves to turn the system off each hourish or is there something else I forget?

  Thanks for any help.

  Hello

  I m not a technician, but for me, looks like the fan connector is working properly if you already replaced the fan and therefore, it would be necessary to replace the motherboard

  That s all I can say about it having a look for second mainboard or laptop where you can get a motherboard cheap. Maybe it works. :)

• Windows hangs / freezes randomly (RESOLVED)

  Hello!
  My computer hangs / freezes randomly every day. This started happening after a Windows Update. Please don't tell me to mess with my computer because I am 100% sure that it is not the computer, it's Windows. Please help me, I can't take it anymore!

  IMPORTANT EDIT: (the above problem is SOLVED) ignore this problem above and help me with this other problem, you can:
  I have another problem, one that I have had since I have this PC. I lose my Internet connection randomly without any reason, this happens especially when I play multiplayer games. The router still works, there is still Internet (in my iPhone, iPad, another PC), but my PC says:
  
  "Network 2".
  "No. Internet access"

  I use the internet cable. The cable is properly connected and I tried to solve the problems, but didn't work.

  So can you please ignore the last problem and help me with this one?

  Thank you in advance!

  Kevin

  System:
  OS: Windows 7 Home Premium
  Graphics card: nVidia GeForce GTX 690
  Processor: Intel Core i7-3960 X
  RAM: 16 GB of RAM

  I have not had the opportunity to try, but if you have access to another machine, you should be able
  do a repair reinstall of Windows by installing your HARD drive on this computer, unless activation
  You can do it on another machine.
  Once you move the HARD drive to your machine things should be fine,
  and if you reactivate Windows it should pose no problems.
  The 'install, upgrade and activate' instance should be people who can check it out.
  Or - if you have another HARD drive install Windows to this as a test (assuming the rest of the machine
  Awake quite a long time to complete the installation :)). If the machine still locks with a clean base
  installation of the material becomes more suspicious.

  You will need to answer a few questions over early to help in the process of elimination.
  Behind closed doors are not uncommon when focusing on a machine with a game, but randomly at any time the camera can come from many things are so difficult to solve.
  -You mentioned beeps. Describe the beeps. Long, short or a combination of both?
  They only happen once?
  The manual of your motherboard has a description of the beep codes? Different BIOS
  Use different codes, but the codes can be found on the web as well.
  -Have you run on the cpu, the gpu and the motherboard temperature monitors?
  -Have you tested the hard drive?
  -Settings of the BIOS to default? Not overclock the cpu or gpu?

  What were the results of the MS fixit is in the links above, and what did the
  FixIt actually do to try to resolve the failures? They were rolling Windows back to front
  you have installed the Windows Update in question?

  Things are running more fluid during boot, boot, that when in Safe Mode?
  Clean boot is useful for finding conflicting startup applications and services, but it does not cover
  programs, you can run after loading Windows.  He could also miss a few things like
  the pilot of Daemon Tools, which is known to cause problems, if you have Daemon tools or
  a similar software installed.
  Is that absolutely nothing else than you did at the time of the Windows update?

  Some of what I read the PSU Chieftek should be a good diet, but the review below
  find a problem with the application of current stable - (turbo Cheiftek 850W series)
  «The voltage drop is very high, unacceptable thing for a PSU 850w which is intended for the high-end systems that require a stable power supply.» Also with more than 80% of the charges, the readings of voltage of 12v lines are far from regulation ATX. Despite the fact that the pc continued to work normally, no one would have a power with this voltage drop. I would like to have the equipment to measure the ripple also. »
  While Chieftek is apparently made by the mfg even as some brands that are more
  known in my part of the world (Oz), an unstable current is often caused by markets good components (coils and capacitors), but even a good quality diet (any PC component) may be faulty from the start, and camera are a common symptom of a failed power.
  If the power supply was the problem and the system hangs even when not under duress, you do
  have a very real need to fear a crash while performing a repair reinstall. Full backup of data
  would be advised.
  .

• What is the temperature of the motherboard to normal operation

  HP Pavilion t6250p Windows 7 Home Premium 64-bit no changes to the operating system

  Motherboard is Pegatron Benicia (CPU 1)

  Temperature work 43-44 C or 110-112 is this normal?

  It's a normal temperature of motherboard.

  If you happened to live in death Valley, CA and had no air conditioning it would be a very slightly higher.

• aroura r4 motherboard at high temperature

  I have a problem with my m.b

  It heat temp 96 supported

  My cpu 3930 k

  I do not use oc

  When I touch the m.b I chip donot find him hot

  can it be false temp?

  or my m.b is going to burn?

  Please a little help

  You will probably get a better response if you re - post it in the forum of the Club of Alienware .

• CPU temperature

  Hello

  You just bought a Satellite M30X-128.
  I want to monitor the temperature of my cpu, but the usual programs that I use in my computer does detect not all sensors in my laptop (Motherboard monitor and fan speed). This could mean that this laptop does not have probes at all = /?
  I may do a bios update?

  Best regards [[]]

  Hello

  Yes, there is some temperature sensors. As far as I know there are downloadable tools on the internet.
  Usually they can access temperature sensors available on your pc. By accessing the available hardware monitor chips, some of them can show temperatures, voltages, and fan speeds. Most of them work well with desktop computers, but not with laptops. In my opinion, there is a protection because through false user configuration can damage hardware components.

  I have not yet tried, but some of my friends took some tools, but without success. If you find one and you want to use to change the speed of the fan s or something like that, do it at your own risk. If you want to change some settings use Toshiba Power Management. Here you can change the speed of the processor and method of cooling.

  Good bye

• Re: Room Temperature for Satellite A100-999

  Hi all

  I have a Toshiba Satellite A100-999 (old lil :/) with XP

  I was wondering what are the temperature ranges at low, medium or high performance for the motherboard and CPU.

  at the present time about the temperature I have are: (Celsius)
  Motherboard: 60 + -.
  CPU: 65 years and more-

  When it has a high performance, it reached 90 - 95 +-. And if im right... the CPU with this temperature control can be activated automatically right?
  As im not an expert in the field, can someone guide me a bit?

  From now to detect temperatures im using the software: Everest AIDA64. (I guess that temperatures are not 100% Reliable, but they give me an idea).
  If there are ways to cool the laptop (I know cleaning is one of them of course) I would be grateful to receive some information.

  Thanks in advance

  concerning

  > I was wondering what are the temperature ranges at low, medium or high performance for the motherboard and CPU.

  It is not easy to say dude. The temperature can be always different and always depends on the use of the laptop.
  On the Intel page, you will find details about your CPU and you can find the temperature for the CPU limit. It s mainly around 100 C.

  However, if the temperature is too high, then the laptop would shut down automatically to prevent the equipment from damage. If the laptop is secure with such protection.

  By the way; the temperature can occur at a higher value if cooling modules and grids are obstructed by dust. So it s advisable to clean the grilles and fans of compressed air for usinf time spraying time.

• Re: Satellite M30 604: update BIOS to disable checking of fan/temperature

  Hi all!

  I am a (satisfied) owner of a Satellite SM30-604.

  It chanced that the internal fan broke and I managed to provide enough air "fresh" with other fans of two. Let me point out very well on this point: there is no overheating problems. But no fans are now connected to the motherboard (Intel odem i855pm-333, I guess).

  Then, it appens when CPU reached 70-72 ° C (this is a normal temperature for this architecture), the mobo to slow down the processor, centrino M (1600 MHz) at a frequency which, roughly speaking, one quarter (400 MHz), leaving the laptop useless.

  So my point is: is there a BIOS (also unofficial, modded or what else...) which can turn off checking of the temperature/fan motherboard?

  I'll help apriciate!

  ALE

  PS: my current BIOS is Phoenix v1.70. I can't find an official update.

  > So my point is: is there a BIOS (also unofficial, modded or what else...) which can turn off checking of the temperature/fan motherboard?
  No, there is no such BIOS.
  What you can do is change settings in Toshiba Power Saver for energy savings (I assume you are using Win XP).
  So Toshiba Power Saver you can change the method of control of the CPU to fixed and processing speed of the CPU to the next level.

• Satellite M40-184: Temperature increses to 95 degrees if CPU load fully

  Hello

  I have this laptop for almost two years and it works perfectly, but I discovered thease days that the temperature of the cpu at full load is charged to O it comes to 70 and 95-98 degrees celsius.

  My question is is there a hardware protection built into the motherboard of the laptop from overheating or shuold I worry more about the problem?

  I always keep a litle raised to allow the laptop airflowbelow and I can hear the fan operation.

  Hello

  It s nothing unusual that the CPU temperature increases to a higher level during the CPU works with maximum performance.
  It is a fact, not a problem!

  If you ask if there is a protection of equipment built into the motherboard to protect the laptop from overheating.
  -> Yes, the phone supports this overheating protection! If the temperature occurs at the critical level the laptop stops automatically.

  In your case the laptop no shutdown and so I don't assume that everything is ok

• Temperature of the GPU on Satellite P100-102

  Does anyone know the values of normal temperature for the GPU from NVIDIA 7600 Go series? After replacing the motherboard by the service, the GPU reached 82 degrees Celsius (180 deg F) (without executing 3d application) and only the main cooler blows. Under 3D performance he attained values around 100 degrees Celsius.
  The values were obtained with the Everest program!

  Thank you
  Jan

  Hello

  Have you noticed the same temperature before replacing the motherboard?
  AFAIK the P100 supports a clean cooler graphics card.
  Two heat sinks are placed on the map: one for the CPU and a GPU.

  It seems that the GPU heatsink does not work. Why? Maybe the technician didn't properly connect I n don't know
  But try to contact the service guys again I think they should check again before the GPU goes dead

• Satellite M40 - 244 sudden stop - cooling/temperature problem?

  Hello everyone!

  For about 1 week, my laptop M40-244 became unable to cool down! Then, of course, more often, it stops suddenly to avoid any damage. I am sure that this problem is triggered out of cooling, simply by touching the left side of the key board it is easy to feel the (high-temperature 8 -

  My QUESTION is: is it possible for me to avoid the repair?

  I'm in Shanghai, I can not expensive toll-free phone and surprisingly that I have not found in the Web from Toshiba site any way to contact a Toshiba support by e-mail (if someone knows a way, please tell me!)

  Because it's very curious: my laptop is '8-month-old', never this kind of problem to date, and Toshiba is well known for a good cooling system. Recently, my laptop did not shock. Would it be possible that the fan has suddenly stopped working well?

  I tried to "verify" my laptop, but the failed to install of Speedfan and Motherboard Monitor 5 seems unsuited to the M40 244 then he is totally unable to find any sensor Board! Now, I've seen in some forums and website the possibility of the "underclocking", or a way to 'reset' the BIOS fan, but, Wow!, I am not an expert! What it means? It is possible with a laptop computer, or it is only possible with a PC?

  Here go us! I can go to a store of Toshiba and I guarantee, but it is required to serve 1 week without my laptop so professionally, she is extremely boring for me!

  Sorry, I'm a little long and sorry for my English (I'm French!), but If someone KNOWS A WAY THAT ALLOWS ME TO SOLVE this COOLING PROBLEM BY MYSELF, please tell me!

  Thanks in advance,

  Fred

  Hi Fred

  Vacuuming, cleaning procedure is not bad and very easy, but be careful. But if it does not help you should contact Toshiba service partner.
  The fact is that your laptop is under warranty and if there is a serious problem with the cooling module and fans the service partner must check.

  If you click this link, you will find the list of the FSA from Toshiba:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  In addition, you should check the settings in the energy saver because this Toshiba tool that controls the use of the CPU and cooling method.

  Good luck

• M30X-118: how to get the temperature of the processor?

  Hello

  I would like to ask how can I get a cpu temperature in Windows XP.
  I tried some utilities like MotherBoard Monitor and MobileMeter, but they show nothing. In MobileMeter, I have only the cpu frequency and HDD temp.

  Any ideas?

  Thanks in advance

  Hi it tries to download this software CPUCOOL 7.3.6 from the web site: WWW.CLICK-NOW.COM(free dowload) and then tell me the result...

• P7-1233w: CPU temperature problems

  I made some updates for my PC recently, mainly a new power supply and a new GPU. Now my time CPU become too high. TBH, I'm not really sure what they were before.

  in any case, Im using Speccy to monitor all of my time. My motherboard is usually around 30 * C, GPU usually around 34 *, and the HARD drive is usually the same. For all those who are good. But I have CPU will slow anywhere since the middle of the fifties up to 70 high years. And after playing something demanding as The Witcher III or GTA V, temperatures are much higher. Ive seen as high as 93 * C and its not uncommon for the temp to be 90 + when I close the game.

  Even with these high times, I really seen performance problems, even when The Witcher III running with everthing on Ultra. Bad still get a solid 40 fps on that. So my first question is how do I know that the readings are accurate.

  Ive tried a few things to get off the time. I had some Artic Silver 5 and Redid the thermal paste. Not much of a change at all. I also noticed that the heatsink fan blowing on the CPU instead of drawing air away from him. According to my research, some people like it grows and some pulling. If I swapped out the fan pulls air from the radiator now. Only I did there, so I don't know how it will affect about 30 minutes in the long run, but so far, temperatures are much the same. Maybe a little lower.

  Regarding the breakdown in this case, I went from the case of the factory to a full waist after I did the GPU upgrade. I also added a few fans. The new case has a 80mm fan on the Panel I have drawing air into the case, a 120mm fan on the back that is drawing air out of the case, two 80 mm fans on the PSU, one inside hand and one on the outside and they are both pulling air out of the case. Then I have a fan on the bottom that I'm drawing air into the case. The GPU has also two fans on it, and they are directly on the fan on the bottom down.

  So, my first thought is a liquid cooling. I was thinking about something like that.

  http://www.Newegg.com/product/product.aspx?item=9SIA6J32TS8512

  Apart from this and something like a new, better radiator, Im really at a loss. So any advice?

  No one? IM thinking that my CPU temp who maybe Im seeing double the actual temp. Which could explain why he can turn and fall very quickly sometimes.

  Also, I opened the case and used my infrared thermometer on the radiator. 35 * C. His sentence warm to the touch. IM Yes CERTAINLY get bad readings. Anyway I can fix this? Or at least know what is the cause?

• Satellite Pro L100 centrino duo T2400 temperatures

  Is anyone know on the normal temperature of processors because my centrino duo t2400, sometimes at more than 90 degrees and how to solve this problem.

  Thank you

  First of all: How do you know that your centrino turns 90 ° celsius? What application are you using to measure temperatures?

  In most cases involving the mobile system of temperature measurement, there that the temperatures are much higher as they are displayed.
  The problem is that the sensors in laptops are much more different then mothers cash but applications are mainly intended to read the temperatures of these cards mothers but not mobile motherboards which translates to false (or too high) temperatures.

  Welcome them