Problems with copy and paste cells in Excel 2011 bold (Mac) in Ai CS5

Similar Questions

• Problem with copying and pasting the bottom like a layer

  I use Photoshop elements 14.  I used the Polygonal Lasso to select part of an image and to turn off the Cup in a new layer.  I opened the image I want to use as the background to place the cutting on.  I select all and then copy and paste it into the file with the cutting.  What appears as a layer of this background in cutting a file image is a tiny part of the original image.  For example, the original image is a photo of the entire landscape and all that glue in the bottom layer is a small part of the sky.  I changed the resolution of the original background photo and the file with the cutting at the same resolution and that did not help.  How can I get the whole background photo to appear as a layer of the file cut on the Photo?

  If I understand your problem, using this example, I selected the background flower later and placed on a new layer, layer 1. Then I selected the field of the whole flower to another image and and copy/pasted on layer 2. The problem is not so much the resolution of 2 photos but rather their pixel dimensions. In this example, the dimensions of the field of flowers were much smaller than the image of the close-up.

  

  I resized and then 2 layer to fill the drawing area:

  

  Perhaps it would be easier to pick the flower of the image enlarged and paste the selection in the field of flower photo. Then, you can resize and reposition the flower according to the needs:

  

  If this isn't your scenario, please specify.

• I need help with copy and paste does not

  I already asked this question, but no one seems to want to help or does not know the answer.  I can't afford to pay microsoft $49 help. It is their dang opertating system and you would think they would help the customers who buy their products.  Don't think!  Please, someone help me.  I am a graphic designer and need to copy and paste all the time, but it does not work.  It's so frustrating.  Should have bought a Mac time... next.  If no one here can help... where can I go for help?  Here the question again.

  Copy and paste the orders have stopped working in all my software programs (Photoshop, CorelDraw, Corel Painter, etc.).  When I type "copy", or "control c", it crashes and whatever program I use becomes inoperative, as well as all my programs, until I can get the specirfic program to close.  I ran Services.msc to ensure than the Clipboard (did not find Clipboard so I assumed it was changed to album) has been activated, which he was, but when I click on 'Start service' it says "cannot start service on local computer album.  "Error: 1068: the dependency service or group could start. It started several weeks ago and I have not installed new programs during this period.  Only my computer display was the automatic updates of Windows.  It's very frustrating... How can I copy and paste to work.  I got this computer less then 4 months.  Thank you

  To all with this problem, try this:

  http://support.Microsoft.com/kb/309662

• I have a problem to copy and paste the text in Photoshop

  Hello everyone,

  I have a problem with Photoshop, and I hope to find someone to help me

  Here is my problem:

  Copy of text Web, Word... to paste in photoshop does not work.

  You have a solution for this problem.

  iMac opportunity

  OS: El Capitan

  Thank you very much

  Nice day

  
  Alexis

  Try to clear your browser's Cache.

  ~ Assani

• Problem with cutting and pasting online

  I was not able to copy / paste everything online using IE or another browser.  I can't understand what I need to do to remedy this situation.

  http://www.bleepingcomputer.com/tutorials/tutorial95.html

  How to cut, copy and paste

  See you soon.

  Mick Murphy - Microsoft partner

• Sequence with copy and paste data

  My effect plugin implements the sequence data to save and retrieve a string like the PathMaster example. Indeed, the code is pretty much cut and paste from this example. Everything works fine for the backup and the opening of a file, but when by copying and pasting the effect, it seems I'm getting data corrupted for the flattened sequence data. I see that AE deploys the following calls in the order:

  PF_Cmd_SEQUENCE_FLATTEN

  PF_Cmd_SEQUENCE_RESETUP

  PF_Cmd_SEQUENCE_RESETUP

  PF_Cmd_SEQUENCE_RESETUP

  It's on the third PF_Cmd_SEQUENCE_RESETUP that the sequence_data is not correct. I've seen similar to this issue positions, but it was never answered.

  Any help would be appreciated.

  I realized that it was. My data structure was not correctly sorted. The sequence data must be structure so that your unflatten/flattened flag arrived until all data needed as pointers for flattening when RECONFIGURE them gets called he can ride correctly and can detect if the sequence data is flat or not. Previously, my data structure was as follows:

  typedef struct {}

  Prefix A_char [255];

  Flat A_Boolean;

  } Flat_Seq_Data;

  typedef struct {}

  A_char * prefix;

  Flat A_Boolean;

  } Unflat_Seq_Data;

  And it should be like this:

  typedef struct {}

  Flat A_Boolean;

  Prefix A_char [255];

  } Flat_Seq_Data;

  typedef struct {}

  Flat A_Boolean;

  A_char * prefix;

  } Unflat_Seq_Data;

  Which makes me wonder if the unflat data get past to RECONFIGURE an error must be returned or simply do nothing?

• having problems with cut and paste - picture is black

  Original title: copy / paste black blob Hi... I have a problem with sometimes to cut and paste where I eventually stick no more that a "black blob" that seems to be a chart... that is, it can be stretched in a big black blob. Seems to happen especially when you use ctrl c and ctrl x and can be when the target application has not already been opened. Open the target application and use drop-down cut or copy seems to work OK I can say.

  Any ideas how to fix this please?
  JM

  Hello

  ·         Since how long you are facing this problem?

  ·         Did you change your computer before this problem?

  I suggest you run the System File Checker and see if it works.

  http://support.Microsoft.com/kb/929833

  I also suggest to check again user account and see if it works.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• Need help with copy and paste in Excel

  I use Adobe 10 and I am trying to copy a PDF file that contains an image and then paste into excel. However, I want to choose only a part of the image and not the whole of the PDF document. When I do, and I tried all the options available, that it will stick to all of the data associated with the image in 1 column in excel. What I want, is to paste only the part I selected and copied into Excel as an "image." This used to work in an earlier version of Adobe, but I can't understand the do in 10.

  You probably want the instant tool that is not installed by default in Acrobat X (don't ask me why).

  To put it in your toolbar, right click on your toolbar. Select Edition > take a snapshot.

• How to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7?

  OT:touchpad.

  Hello, can you please suggest how to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7.

  It worked a few days ago... I don't know what I did so that it does not work right. I like to copy and paste when right or click with the left button of the touchpad... They have a key on the Panel of key with copy and paste and cancel and cut options next to the bar area to the right of the ALT key with lines and an arrow on the key... Always like the old mode right click and copy and paste from the touchpad... Thank you

  Hello

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• With IE8, I could copy a graphic from a Web page and paste it into Excel (each entry has appeared in his own cell) - is there a Firefox setting that allows me to do this?

  The question < bit much > says it all - there are several financial web sites that provide the account chart activity. With IE8, I could copy the mires and paste them into Excel with each "category" mentioned in individual cells (text and digital). This allows for monitoring and handling and, at least in some cases, was better than the "Download" function provided. When I try it with Firefox, all data is pasted into a single cell (reminds me of a delimited file importing - if digital indicators / text or cells separators are not identified correctly Excel will import all the data into a single cell).

  See:

  • Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/dafizilla-table2clipboard/

• New to InDesign, with problems of objects vs just copy and paste.

  I'm working on my first page of brochure layout in InDesign.  I am having some problems when trying to place some simple vector Illustrator in my Indesign document.  When I do a place in the file, the image loses its sharpness, but if I select the image in Illustrator then copy to HAVE and paste into InDesign, it looks great.  I don't know enough for all this knowledge if this will have a negative effect on printing, or any other aspect of the finished product.  When you use the copy and paste method I don't seem to be able to change original that the work doesn't seem to be "associated" with a file I but rather just work in the InDesign document, if I understand correctly.  I'm doing something wrong?

  Thank you

  Justin

  Best practice is to always use place. You don't have to worry about how the image looks in InDesign - this is just a glimpse of the screen. You can improve its look a bit using the view > display performance > high quality display. Even then, what you see on the screen is always a preview and will not look as good as what's to print.

  Remember that when you actually print, data from the original Illustrator, (not the preview) file will be used for output.

• CTRL C and CTRL V (copy and paste does not) in excel

  Hello
  
  Today, we had a unqiue request saying a user is unable to use CTRL C and CTRL V (copy and paste does not) in excel after installing the smartview. However, he is able to paste using the Edit-> Option paste.
  
  Ago also much excellent leaves open while the user is facing this problem with some of them having Macros enabled.
  
  Is expereinced bythe user mainly due to multiple excel question, or is it a problem with the excel user settings.
  
  Please let me know the solution or workaround for the problem expereinced.
  
  Its 9.3.1 Hyperion Essbase with MS office 2007 version.
  
  Thank you very much
  Krishna

  Hello Krishna,

  This is a bug with Excel 2007 http://support.microsoft.com/kb/942430
  The solution is to create or change an existing excel shortcut to start Excel with the /s switch:
  Excel.exe/s

  Kind regards
  Robb Salzmann

• HP Jet 11-D007NA: How do I copy and paste in Windows 10 with left and right keys

  Hi Everyone,                                                                                                                27/08/15

  I know the c control and control functions v for copy and paste with Excel and Word. How do cut you, copy, and move entire folders when you are working in Windows 10? 2 tapping fingers at the same time used to work in point 8.1 of Windows but does not work in Windows 10. I want to move my documents together and download files from my drive c on a memory stick that I have only 32 GB SSD in my book and it is fill up very quickly. I don't want to lose days copy individual files and sticking them in the memory stick. That would be a common mistake. I don't understand why HP had to remove the left and right buttons and make life very difficult for its customers. They probably saved a couple of hundred by getting rid of the buttons in their calculation of costs, but made it impossible for customers to use the laptop in a productive way.

  Vijpat10

  Have you tried pressing the right and left of the touchpad corners? Most of the models without physical buttons have this function.

• Copy and paste problems.

  I started having problems when I try to copy and paste text from one program to another.  Two known issues.

  I can't copy and paste text from word processing Microsoft Works 8.5 on Windows Mail, version 6. CTRL C and paste, or right-click Copy and paste, the two methods only stop Windows Mail.

  As there is no spell check here I tried to write this question on work and copy and paste on here. But he just farm Explorer. And I had to restart and reconnect.

  I've been aware of this problem last week, and I have not loaded any addition or program updates, only those coming behind the sceens from Microsoft.

  If there is a related issue. I tried to copy a number of password from one web site to a work page, and it says that the size was too big, I don't remember the exact wording. It was only about 8 letters and numbers well.

  I use Vista Home Premium on a Dell Inspiron 1520.

  That's all very annoying when a week ago, everything was fine. Can someone help? Or explain why I am now having this problem. Moreover, I did try and do some restorations, but that has not solved the problem. I have not tried anything else that I'm not an expert on computers.

  Hello Polly,

  It seems that your OS has corrupted. However if the problem happens with Works 8.5 processor only, I suggest you try to uninstall and reinstall. In case this does not work, try to run the command SFC. To run this click Start, type "cmd" without quotest and right click on CMD and click on "Run as Administrator" and when the black window appears, type the following command.

  SFC/SCANNOW

  I suggest you restore your computer to factory settings. You can do it from this link-

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&DL=false&l=en&s=DHS&docid=28C0548D825EB65DE040A68F5B2865A8&doclang=en

  However, this will remove everything from the computer and you will lose all the information on your computer. So use it as a last resort and after you have backed up your data.

• When I copy and paste into my Corel Draw, the image is distorted with the cutting tool

  Original title: the cutting tool false image

  I used snipping too long without problem.  Now all of a sudden (only when I copy and paste into my Corel Draw) the image is distorted.  I use windows 7 64-bit.

  Hi Diana,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2 have you tried to check the issue with another application?

  3. what files are copy you / paste in Corel Draw, using the cutting tool?

  If the problem is specific to Corel application, then I suggest you to contact the Corel Support for assistance.

  Corel communities:

  http://www.Corel.com/Corel/pages/index.jsp?PgId=800085

  Supported Corel:

  http://www.Corel.com/Corel/pages/index.jsp?PgId=800170

  For reference:

  The cutting tool: frequently asked questions: http://windows.microsoft.com/en-in/windows7/snipping-tool-frequently-asked-questions

   

  Snipping Tool to capture screen shots:

  http://Windows.Microsoft.com/en-in/Windows7/use-Snipping-Tool-to-capture-screen-shots 

  I hope this helps.