Screen in camera black wave see fashion running

Similar Questions

• Since then went black download firefox 4 top and bottom of my screen and I can barely see the button/arrow to the left

  Question
  Since then went black download firefox 4 top and bottom of my screen and I can barely see the back/arrow button, if I can not go back to 3.6 and you'd have to show me how, step by step without computer talk if it is not possible for you that I return to internet explore... cordially chris williams

  You are welcome. I'm glad that you were able to find a solution with the information provided by the contributors here.

  So that other users can find solutions to Firefox previously asked take charge of issues, please take a few minutes to come back on the forum, log in, then click 'resolved' next to the answer above you helped more to find a solution. Thank you.

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Try to open an image in camera raw to see a blue screen with a cross on it. How can I see my picture?

  Try to open an image in camera raw to see a blue screen with a cross on it. How can I see my picture?

  Hi gamaree

  Please open Photoshop CC or CC bridge

  For Windows , go to Edition > Camera raw preferences > uncheck "use graphics processor.

  for MAC , go to Photoshop > Camera raw preferences uncheck 'use graphics processor '.

  

  Let us know if this helps

  ~ Assani

• Satellite A300D-158: webcam screen is almost black

  Two days ago, I bought a laptop Toshiba Satellite A300D-158. It's a really cool hardware, but I have a problem with my camera.

  It seems to work, but the screen is almost black.
  I see my face (poor quality, there are a lot of noise on screen) only when I run a night Mode and 50 Hz.
  Interesting thigs, it's that when I hide the camera using my hand the camera stop and try again to black screen regardless of my settings.

  I have to click on 50 Hz to 60 Hz and 60 Hz to 50 Hz and after that I can see a view.
  I checked all the possible settings in Camera Assistant Software but it doesn't give any effect.

  Pls help me ;/

  PS: Is it possible that the hotel is broken?

  Try to update the Chicony Webcam driver to the latest version. The pilot is on the site Web of Toshiba in the drivers section.

  I had a quick glance at the page drivers, there is no camera A300D driver. Try the Satellite L300D webcam driver v1.7.193.0508L

• Tecra M3 - when the motorized screen is completely black

  Hi all

  I really need help with this one!
  I plugged my tour through an S-video to a flat screen and watched a movie and throughout the film, everything worked very well. I stopped regular and normal. Went home and it start and started regularly and I go into my profile and startup programs started running; It froze!

  The mouse icon was surrounded in a cube that was slightly shaded vertical lines. I restarted my computer and as it started showing the logo "XP" when it starts, it displays blue line oriented vertically once more but in the whole of the totality of the screen in groups of 4, all the corners of the screen, then when it is supposed to display your profile to choose to sign in there went blue and showed and error gives me enough time to read and stop.
  When restarting again the screen is completely black and never displays anything.

  I am able to connect via s-video for device that never to see the picture or just a regular screen but the problem now is that it shows these crazy characters across the screen as a sign with the point on top and courses I m able to do the options because I'm familiar with computers , but it does not allow to run regularly.

  I need help please this situation!

  Hello!

  Akuma's right, if you have the same problem on an external monitor s seems to be that the motherboard or the graphics chip is defective and must be replaced.

  In your case I would contact an ASP. They can check your laptop and swap the motherboard.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Screen of 7140 black place Pro 11 where put on

  All,

  I have a coming 11 Pro 7140 8Gb / 256GB and am facing a problem where the machine not turn on the screen.

  The power failed when the machine was asleep/idle (click on the button side, wide screen). Now, when I try to turn on the machine, I get a buzzer to indicate that the machine is turned on, but no display. If I give the machine for 10-15 seconds, I press the windows key to get a vibration, indicating that the machine to windows loging screen - only I don't see it because the screen is always black. Incidentally I've also had this happen on my old 7130 place, but has been able to reset hard.

  So far I have tried:

  Now the power button for 10 + seconds
  Now the power button for 30 seconds
  Holding the power and volume down (which causes the screen to cycle colors full screen: blue green red black white.) Looks like a test function)
  Now power + volume (no answer)
  Now power + windows key (no answer)

  Following the instruction given in another thread of dell support, I also unplugged the main battery. I was not confident to disconnect the CMOS battery because the connector Disconnect method was not too clear and I was worried about damaging it.

  The machine has been in charge of 5 hours - then also a full battery now.

  Are there any brilliant suggestions as to what I can do next?

  A few days ago that I met the same problem with my 7140.  The question was clearly linked to my dying battery keyboard.  I took the same steps that you did with no luck!  However, I am happy to say that the unit is now in place and running after STALL main battery, CMOS battery and all the cables in water under the main battery.  I also removed the SSD.  Once everything has been deleted, I pressed the power button for 60 seconds, drain current in the system and he left in the morning to the evening (about 10 hours).  I held the power button for 60 seconds, then replaced everything mentioned above.  The first start was slow, but he has been back to normal since then.  I have re-flashing the bios with the latest version just in case any data UEFI has been altered by the question, which is certainly possible, since the issue prevents even the UEFI to load correctly.

  I recommend, if you use a keyboard of the battery, do not use during an attempt of the steps above.  It was clearly the problem for me, diagnostics tests run since getting my Tablet upward clearly demonstrated.  Good luck!

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Laptop turn on but the screen is completely black

  Hi guys,.

  I was wondering if someone have an idea as to why my laptop (which was working perfectly last night), now has a black screen when I try to turn it on.
  I read in some other forums who offered to take out the battery and hold the power button, but that didn't work...

  Remedies?
  Thank you.
  Jess.

  Hi Jess

  Is a busy HARD disk when you start your laptop?
  You hear Windows sound?

  If possible try to connect your laptop to the external screen or a TV to see if you can see anything on an external device.

• Satellite Pro P100 PSPAEE guard screen goes white/black

  I have a Satellite Pro P100-PSPAEE running Vista Ultimate. Recently, the screen started going black and white during the day. It does not seem to be asleep like nothing refreshes the screen. All I can do is hold the power button and restart the laptop. Have tried rash, the compressed air fan and have re - configure the minimum processor power management to 100%. Am still getting the problem everyone else encountered this problem and have you found a solution, I would prefer not to have to open the laptop and play with the heat sink.

  Don't you think that this problem could be related to problems of overheating?
  Eventually it s only a software problem

  So try first update the graphics driver and BIOS!

  One question; have you noticed the same issue using the preinstalled operating system from Toshiba?

• The button on my lockscreen does not work on my phone. Recently, my screen went completely black. I can turn on siri. How can I get my screen to turn back?

  My 5 IPhone lockscreen button does not work so I use touch help to the screen power off and screenshot. As I was using my phone my screen went completely black. I tried to plug it into a charger and call but the screen still won't turn. My phone vibrates when I call and I can't turn on siri. I tried to search the Internet on how to re-enable it. Everything I've seen involves using the screen lock button but obviously I can not use it. How do I reactivate it?

  Hello tumbler3100,

  Thank you for using communities Support from Apple!

  I understand that your iPhone screen is returned while you were using it and the on/standby button does more either. Because your iPhone is always vibrate when you call and you are able to use Siri, it seems there is a problem with the backlight on your iPhone.

  Because you have a separate hardware two related issues going on with your iPhone, I suggest putting your iPhone in an Apple Retail Store or Apple authorized service for an assessment of your device provider. More information about these options can be found in the following link.

  Apple - Support - Service Response Center

  See you soon!

• Satellite C660/C660D - shift key causes the screen to go black

  After purchasing the Satellite C660/c660D less than a month ago.
  I am disappointed to see the SHIFT key (left), as well as the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  Course not blogger like tested also in word.
  All the ideas that is weak given the reviews and prices...
  Help... dosnt do it every time, but most of the time. Not happy!

  It is a fault, I don't expect this brand

  Thanks for any help

  Hello

  > I am disappointed to see the SHIFT key (left) and the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  What does this mean exactly? Press SHIFT and CTRL button turn off the display, and you are not able to see anything on the monitor?
  Is this good?

  Have you checked if this happens with the help of an external USB keyboard too?
  If this isn't the case, I guess that your keyboard is malfunctioning and needs to be replaced.

  One of my friends had a problem with my keyboard. The cursor jumped around and some characters are displayed two times this could be resolved by the BIOS update I m do not know if your laptop uses the latest version of the BIOS, but you can check this too.

• Qosmio F10 begins with lines on the screen then goes black

  If anyone can help.

  I have a F10
  When I start it, I start with a line pattern funny on the screen that turns into dirrerant models.
  Then after it starts, it becomes black.
  Runns fan and the drive lights work as is it running.

  I can't get into safe mode and it starts properly and the screen does not black.

  This started with the mires funny when I move something one day and when I did a funny little slider occurred.

  Help, please

  Dave

  + I have more information. It will start and run in VGA mode. If I cange to the mode of the display screen is black.
  Could this be a display driver problem.

  If so where can I download a.

• Satellite L500 - screen is completely black after stand-by

  I have a L500 and after that my computer is on standby, the tried to reactivate it. Now it will not display anything on the screen its completely black and have no idea of what should happen or do.

  Can anyone help?

  Hey,.

  You see something on a screen? The internal screen is probably defective, so you don t see anything.

  If an external monitor stays black I would try to remove the battery and unplug the AC adapter. Then wait at least one or all the night. Now connect the AC adapter and install the battery. Before you turn on the laptop, make sure that the battery is fully charged. Now, try to start your laptop and check what is happening.

  In the worst case it serious hardware malfunction and that means that you would need professional assistance service authorized in your country.

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.