Problems with Desktop Elite 7200, put in a windows domain

Similar Questions

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Problem with blocking to the bottom of the window.

  I have a problem with my laptop, when I stopped the Windows Xp sp3 professional, he cant turns off. Blue screen Windows is blocking down... and stop on this screen. To disable I must press on & press and hold the power button / stop.

  Which can be a problem?

  Did you get that started after the installation / uninstallation of a whole new software? You can also checkhttp://support.microsoft.com/?kbid=307274 for more information...

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• Im having problems with getting my sound to work on windows 7 RC 7100 32 bit I tried to use 2 soundcards.

  original title: Audio does not work

  Problems of sound in windows 7

  Hey all. Thanks in advance for any time you spend to help me.

  Im having problems with getting my sound to work on windows 7 RC 7100 32 bit
  I tried to use 2 soundcards.

  1: creative X - FI Extreme
  for creative people, I tried using drivers creative Beats, creative version drivers and vista 32-bit drivers with no luck.

  2: its integrated with Intel DP35DP motherboard card
  7 drivers are available for intel sound I used vista 32 bit since no windows drivers.

  I have 3 device failed in the Device Manager. Simple PCI controller, peripheral Audio communications of high definition, Microsoft makes confidence audio drivers.

  the 3 rooms of this note.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  with or without pilots the warrning does not change.

  System Spec.

  Card mother Intel DP35DP
  3 GB ram
  Core 2 duo E8400 with
  ASUS Nvidia Geforce 8800gt
  Creative X - FI extreme pci / Intel integrated audio system
  Termaltake 600 watt Toughpower supply
  Pioneer dvd Sata burner

  Managed to solve this problem by installing the 64-bit windows 7 instead of 32 bits.

  not sure why the sound failed. but now its fixed.

• I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit.

  I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit. Whenever we try to open the computer software crashes, we deleted the lock file and reset suggestions as suggested, without success. We have uninstalled and reinstalled the software without success, still the same problem of crash

  If all of the computer crashes, it's a hardware malfunction or a bad/corrupt/old video driver.

  First install/reinstall the latest driver for your graphics card. If this does not help, then you need run diagnostics on your hard drive, memory and also make sure that the fans are cooling the CPU correctly.

• Anyone having problems with effects after that put 5.0.3 update?

  Since the 5.0.3 update a few weeks ago, I had problems with adding an effect to a clip. It seems not to matter type (both are res HD, either a shot on a Canon 5 d Mark II or a .m2t file .mov from a camera of HD Sony HVR - Z5U with a registration unit of memory). I have been using the file types of the same cameras with CS5 since August without any rendering problem, by adding effects, playback, slow response time, etc. Now, it seems doubtful that PrPro can handle adding an effect to a clip.

  Before it would show changes to the effect on the video in real time, but now it takes several minutes for the small front wheel I can access PrPro again. By example, if I add a fast color corrector or levels and try to change only one attribute, it unfolds, crashes, and then finally updates. He plants not (unless I force quit), it just hangs. I tried with just Finder and open PrPRo, and it still occurs. Previously, I could launch Photoshop, Firefox, Chrome, Mail, Finder, * AND * Pro

  Nothing else is it slow (playing back non-rendus, while that rendered or book review), although any reading can be slow sometimes with effect. In addition, there doesn't seem to be picky to a certain video effect. I've done everything I can think of, returning Short or reinstall: log in as root, Pref delete, drives hard various small clips. Initially, working on a FW800 external drive, I have recently worked on internally to test clips, but apparently not to the disc material.

  The fact that everything worked fine before, I can't that assume it was the update. I have the same software on a similar but lesser model home with no problem, but the 5.0.3 update failed with the auto-update and I have not tried to install it manually, is still on 5.0.2.

  Anyone else having this trouble and short of reinstalling, you found a solution? Thank you.

  iMac 27 "(21" model of Home Basic) "

  Mac OS X

  10.6.5

  2.8 GHz Intel Core i7 (4 cores)

  8 GB RAM

  ATI Radeon HD 4850 512 MB

  Master Collection CS5

  > Is there documentation available online on how to revert to the previous version?

  Uninstall Premiere Pro. Then, reinstall without updates.

• Problem with upgrade of the computer and activate Windows, he stated that "the failure of key you entered is already in use.

  Original title: problem with upgrading the computer and Windows activation

  I have improved my week to loast of computer of an Intel Core 2 Duo to an Intel Core 2 Quad processor.  Now Windows tells me I need to register my product.  When I tried to do, he said that "the failure of key you entered is already in use.  To activate Windows, you will need another product key Windows Vista Home Premium. "How can I get MIcrosoft to realize that I have not installed Windows on multiple computers. I just put my equipment?

  Hi Tkelleyaustin,

  I suggest to check the following items and check if the problem still persists.

   

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

   

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/activate-Windows-on-this-computer

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  I hope this helps.

• Problems with audio/video playback and the Source window

  I have some videos that I try to import into my sequence. Whenever I have open the video in my source window (or drag it to the timeline), the sound goes crazy. He starts to jump and identified himself. When I open the movie file in Quicktime format on my computer, it opens and plays very well. In addition, I don't know if it is not connected, but sometimes, when I open a video in the window of my Source, there is no audio. I can drag to the sequence and double-click on it to put the video of the sequence in the Source window and it plays very well.

  The video that I have problems with is a .mov, filmed from an iPad (not sure what model of iPad). It is filmed in Portrait mode, do not know if it matters. Please let me know what other information would be necessary to solve this problem.

  
  Thank you!

  First, answer the questions in the FAQ of Information http://forums.adobe.com/message/4200840

  Second, it IS possible whether the ipad video like video iphone

  IPhone will not edit easily because it uses a variable rate

  -A fix in the #22 http://forums.adobe.com/thread/934466 message

• Problems with Satellite L755D-13V after reinstallation of Windows 7

  Hi all!

  I really need a support here. Im a kind a noob about PCs ;)

  I reinstalled Windows 7 on my Satellite L755D-13V (64-bit). After that, I have some problems with some drivers.

  (1) first of all SM Bus controller driver-free and I cannt find it on internet. I tried the "Hardware Setup" from toshiba support page. Had no results.

  (2) the VGA Graphics standard is listed twice, a gives a yellow "!" He says: "could not start (Code 10)". The drivers are up to date.

  (3) the wifi does not work. All the drivers are up to date but I cannt find a netzwork.

  Is 2) and 3) due to 1)?

  Please help me!

  hortab

  System:
  Windows 7 (64-bit)
  Satellite L755D-13V

  Thank you for a short return.

• Problems with sleep and stopped after upgrade to Windows 10

  Hello

  So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

  Any solution to this problem?

  Thank you.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• Problem with Variables shared in exe running on Windows 2000

  Anyone know if there are problems with the Variables shared on Windows 2000? I can't get the LabVIEW executables that use shared Variables to work Windows 2000 on a computer with just the runtime engine.  Everything works perfectly on XP on a machine with just the LabVIEW runtime engine installed (using LV 8.5).  Shared variables are supposed to work less than 2000.  I have attached the sample code that is based on one of the examples NOR to the Variables Shared - editor and the Subscriber - with some extra stuff for the diagnosis, I added.  On Windows 2000, you can only run one or the other exe.  It seems that as soon as the other come to the part on the diagram with the shared variable node it crashes.  Shared variables are getting written in the because if you close the editor and then run the exe subscriber it reads the latest values set properly.

  On Windows 2000 I tried with the administrator account and off the ladies of viruses, firewalls.  There may be another Windows 2000 setting that causes this problem with the two exes trying to access shared variables.  I do not have the development environment on Windows 2000 computer that the purpose of this exercise is to see if its worth using shared variables.  Windows 2000 computers remain the same in the Test and measurement world.  A research on Developer Zone does not there is no particular problem with Windows 2000.

  Any suggestion is appreciated.

  Hi André,.

  Thanks for the comments!  Your feedback will help us improve LabVIEW for our customers.  This bug has been reported to R & D (#45493), and they're currently investigating this issue.  For now, the best solution seems to be using a different operating system, as this seems to occur only in Windows 2000.  Thanks for the comments!

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• problem with automatic updates and Microsoft Update in Windows XP Service Pack 3

  My sister has a problem with the automatic updates. He has offered 6 updates and she moved them, but next time, she turned on the computer, he was offered the same 6 updates again. She has set up 5 or 6 times now, but she is always offered the same 6 updates every time she turns on the computer.  She tried yesterday to go to the web site Microsoft Update and update his computer, but it runs into the same problem. Microsoft Updates installed updates to update, but after restarting the computer and try to update again, he was offered the same 6 updates.

  I try to help fix and I need help.

  I tried stopping the service automatic updates, delete the contents of the download folder, update the Microsoft Updates web site and then by restarting the service of updates without result. She also tried to remove the 4 updates, she could find in Add/Remove Programs, but also without result.

  Help, please.

  Thank you

  You will be unable to effectively hide or update except if you have finished #2 in my previous answer.

  Or you can open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the difficulty in DEFAULT and modes then AGGRESSIVE and then restart. [1]

  Note: Microsoft offers free support for security updates only. Since KB982524 KB982168 & NOT related to security updates, free support is NOT available for them.

  PS: Updates of July 2011 have gone 'live'-online http://www.microsoft.com/technet/security/bulletin/MS11-jul.mspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.