Problems with dg4odbc after 11 GR 2 upgrade

Similar Questions

• Satellite P870 - problems with WiFi after Win 8.1 upgrade

  Wireless Internet is hopeless.
  Maybe that 3 to 10 pages will load correctly or not at all, for most not at all.
  Other wireless devices in the House are fine, as is the use of the Ethernet.

  Checked the drivers through the Device Manager, says that they are up to date.
  However using the toshiba service station he lists 12 updates including one for the driver Realtek wireless.

  The date of release permanently after the last version installed.
  Try to update by the service center to complete and then comes up with an error message, something like the process is completed by the user.

  Of course I never finished anything.
  Any ideas/thoughts? Just uninstall 8.1?
  Although I'd rather not.

  Hello

  Did you Win 8.1 installation instructions?

  The Win 8.1 drivers must be installed in the correct order!

  I found this info on the page of the Toshiba UE driver;

  1 wireless Intel display-> uninstall
  2 windows 8.1 update-> Install
  3 TOSHIBA Assist Office-> upgrade
  Driver Intel 4-> upgrade
  Display NVIDIA 5-> upgrade driver
  6 Intel Rapid Storage Technology driver-> upgrade
  Driver HD Audio NVIDIA 7-> upgrade
  Atheros Wireless LAN driver 8-> upgrade
  9 Realtek Wireless LAN Driver-> upgrade
  Driver Realtek 10 package filter Bluetooth-> upgrade
  TOSHIBA 11-> upgrade system driver
  Function key 12 TOSHIBA-> upgrade
  13 TOSHIBA eco Utility v2-> upgrade
  14 TOSHIBA PC Health Monitor-> upgrade
  Fingerprints TOSHIBA 15-> upgrade utility
  16 TFPU WBF remove fingerprint-> upgrade tool
  17 TOSHIBA HDD Protection-> upgrade
  18-> upgrade TOSHIBA VCR
  TOSHIBA 19 Blu - ray disc player-> upgrade
  ArcSoft TV5.0 20-> upgrade
  Plug-in for Windows Media Player-> upgrade TOSHIBA 21 resolution +.
  CyberLink MediaShow 6 for TOSHIBA 22-> upgrade
  23 TOSHIBA Media Player by TrueLink sMedio + -> upgrade
  24 TOSHIBA Service Station-> upgrade

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• problem with netflix after upgrading to firefox 6

  now that I've upgraded to firefox 6 I can't spy snapshot netflix more. Please help I don't want to use a different browser to do this.

  This also works if you have problems with the update of Mozilla FireFox 10.0 if you dress like 9.0.1 in accordance with the instructions of the DavidLee1951. Thank you, David Lee!

• Several problems with photoshop after upgrading to win10

  I've updated to win 10 a week ago and today I experienced several problems with photoshop. The first question is about the quick selection tool. I select and try to choose an area on the picture I want to work on. It performs either one of two things. F1. It won't select anything finally photoshop will crash. 2 when he decided to select something it goes super slow and will switch to the symbol of thought every few seconds.

  second question...

  Because I can't get select quick took the job I'll move the pen tool. I started to select anchor points and ill get maybe 20 points the image then becomes completely black. If I scroll top down I can clearly see the parts of the image, but when I stop scrolling returned to a black square. Later photoshop then crash.  TSF is to face all of a sudden?

  Make sure that your GPU drivers are perfectly up-to-date (directly from the manufacturer) and they are 10 Windows compatible. You can also try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Benjamin

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• Problems with aero after the latest updates

  Hello

  Someone had a problem with the latest Microsoft security updates
  touching the aero desktop theme.

  Since I downloaded the updates my aero as a theme stopped working.
  I did a roll windows back but I still have the same problems.

  The updates are #KB971029 and #KB971029 the
  updates have been downloaded on 03/17/11

  I hope someone can help with this problem.

  All the best

  Philip Davies

  Hello

  OK try to remove these updates to see if that helps. Sometimes manually
  install the updates one at a time will prevent topics such as this one (if the)
  mises_a_jour have been the question).

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Or

  The problems with the removal of updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updates

  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  AFTER removal of updates, do a system restore to before
  updates have been applied to the origin. Therefore, affect the total amount of
  updates are deleted.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =======================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ======================================================

  If necessary try a repair Installation which allows to keep the programs and data however
  redundant backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• x 200 tablet, still have problems with smartaudio after driver conexant last updated.

  where the devil file complaint or tech support, whenever I call it, there are people who do not know jack whatever it is.

  I had an x 200 tablet, was seen problem with the beams stupid mistake that keep popping up.  then I updated my drivers conexant coming out who was supposed to address this problem. But it doesn't, it creates more problem.

  Now whenever it starts, an error with smartaudio.   so, it leaves me with 2 choices, or I used the former driver who does not mistake smartaudio. but the beam forming erro. or I use the new driver that will give me the error smartaudio.

  anyone has the solution let me know please.

  running, updated vista business sp2.  and Yes, I've updated all the drivers that I find unnecessary and causes more problems for me.  as the update of the thinkvantage system that made it useless until I have some file and add vista business sp2 in it.

  Yay what's up, I answer to my own problem tech.  I hope this can help some of you.  CUS we are ourselves since lenovo cannot help us with our problems. they should just all the fire so that they can sell their products cheaper. for the ppl who work there are unnecessary.

  "OK for people with the beam forming the problem, just go to c:\program Conexant delete folder there, it's to say" TOMY.

  reason for this is because it won't let you delete the folder of conexant all at once.  and remove it to ensure that the new drivers to install correctly.

  After that, simply download and install the latest drivers from the website of lenovo conexant.   Now you should get only the smartaudio error when you switch to Tablet mode or laptop.

  just go to the c:\program files\CONEXANT\SAII directory, rename the smartaudio and SAIIcpl to something else.  I just added a _ in front of her.  This way, whenever you change the mode it will not create the smartaudio error. and you can rename it back later if you wish, or if someone comes up with a better solution

  now, you might ask, how can we change the parameters for the smartaudio.

  If you really want to set that just go to c:\swtools\drivers\audioc\smaudio\smaudio, there is an icon that is smaudio.exe you can double click and run it to change the settings.

  After that, you should not get the beam forming or smartaudio error.

  Lenovo has probably screwed up on some instructions, which does not run programs properly maybe that happens to people with vista sp2?

  CUS, I noticed that when I upgraded to sp2, the thinkvantage system update will not work until we edit some file and add vista sp2 in it.  You can search the solution on this forum if you have this problem.

  Thanks and good luck

  just need to do an update, while this method a bit worked, sometimes when I start I always get the beam forming the error.  It's just that it does more every time I switch between Tablet and computer laptop mode, which is better than nothing for now.

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Satellite L70-A-118 - problems with WiFi after Windows 8 to 8.1 Win update

  Dear Sir/Madam,

  After that update of Windows 8 for Windows 8.1 WiFi disconnects regularly and if there is a connection
  the connection is limited.

  I followed the update instructions I downloaded with the Windows 8.1 drivers.

  The WiFi LAN adapter settings are intact on DHCP.

  Waiting for assistance to help me a stable wifi connection.

  Kind regards

  Low van Leeuwen

  Two weeks ago I've updated my Satellite U940-103 and everything went well. There is no problem with WLAN. I use it all the time.

  What model of laptop do you have?
  Have you installed the driver for the Toshiba download page or driver provided by Windows update (sometimes classified as important update)?

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!