Satellite P300-150 - problems with HDMI output

Similar Questions

• Satellite P300-156 - problem with drivers ATI 3470

  I have download the new catalyst 9.3, I exceeded the drivers with mobility modder, but always after the installation, the pilots see 3470 drivers only 3450.
  What is happening and why Toshiba is not updating the drivers for Satellite P300 on the site?

  Hello!

  The reason is the reason for which you are trying to use a driver that is designed for desktop graphics cards and not for laptops.
  It s on your own risk to use these drivers because they don t have a protection against overheating.

  In your case I remove and install the most recent that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite P300 - strange problem with num lock keys

  I had a problem with my keyboard lock num. I have a P300D - 131

  By pressing '4' and '8' at the same time, it shows on the screen '4 '.

  By pressing "0" and "6" at the time, tamed, it shows on the screen "0 0".

  This also happens if I touch the very fast numbers. That's why you can't count on the num lock keys! I have this problem since I bought the laptop in July 2008. Now, I found this forum and I hope that really that someone can help me solve this issue!

  Thank you
  HDW

  Hello

  These issues in the past have been resolved with BIOS update. I therefore recommend as a first step of the BIOS update.
  Check the current version on your laptop and the most recent proposed on the Toshiba download page.

  To be honest I don't understand why you waited so long on this subject. Laptop warranty valid and the nearest Toshiba authorized maintainer can help you about this.

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Problems with HDMI output

  I have a HP G61 Notebook PC with windows 7 Home premium

  When I plug the HDMI cable into the laptop and connect it to display the output of the speakers or headphone stops. The bars of output on the mixer vloume display output from the HDMI device, but nothing independent headsets and headphones or speakers.

  What is the case can someone help?

  OK problem solved. I typed sound in the search on windows 7. Then went to the HDMI audio output and off the exit. I hope this helps someone the with this problem

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• Satellite P300-150: Boot xp-vista & only 3 GB of memory with the xp

  Hello

  I have a Satellite P300-150 and I have two problems:

  (1) I install XP in my second partition and I can't boot to vista, I can start only for XP

  (2) I have install Windows XP Pro SP2, but Windows only shows 3 GB

  Thank you
  Fotis

  Hello

  > 1) I install XP in my second partition and I can't boot to vista, I can start only for XP
  The problem is known to me I installed the XP too on my laptop and after installing XP, I was not able to start the Vista because XP destroyed the Vista boot Manger!

  If you need now a Microsoft Vista DVD original (not Toshiba DVD recovery) and you should boot from the Vista DVD. This allows to repair the Vista Boot Manager.
  Then, you will be able to boot into the Vista operating system. Then, install the free tool called EasyBCD.
  This tool allows you to change the Vista Boot Manager and add the XP operating system to the Boot Manager.

  (> 2) I install Windows XP Pro SP2, but Windows only shows 3 GB
  I guess that your XP is a 32 bit OS and so he can see only 3.2 GB due to the limitation of the 32 bit OS.
  More details you can find on the Microsoft page

  Good bye

• How can I configure the keys easy to work with iTunes on Satellite P300-150?

  I have a Satellite P300-150. The easy (the illuminated keys above the keyboard) keys work fine when iTunes is in the foreground, but I want them to work when I minimized iTunes or switch to another window. I found the "TOSHIBA button Support" utility help within TOSHIBA, but it only allows me to set it up as the "Enlightenment" and "CD/DVD" [drive] (the two left most) easy keys make...

  Any ideas please?

  Thank you.

  I doubt that this is possible
  I m using the WinAmp instead of Windows Media Player and the CD/DVD button works with Winamp. I want to say I can run Winamp by pressing this button, but I can't use the game, break, buttons forward in WinAmp.
  I think that it is not possible also with ITunes I've never tested, but it seems that it s not configurable.

  See you soon

• Satellite P300-150 - impossible to record all sounds

  Hello, someone has an idea why it is not possible to record all the sounds (for example with the Audacity software)? -Other classes of water-recorder do not work too...

  Demand for Win "SndVol32.exe" shows that as a result of input sources: Mic and Line in French - output, it is shown SW-Synth., wave, CD player and Master Volume. -In the case of P300, Mic is in fact only to the webcam mode. On my old P20-852, here I could record the flow of the web and for expl WMP 10. and sometimes I use it for the soundtrack of the synthesizers installed.

  I have de - and reinstalled the rather (Conexant August 2008 version) and a newer version of SndVol32.exe... I tried with a new installation of XP on a 2nd partition program... same result. What's the reason, because I have a modification nLite XP Pro SP3? -My laptop is a Satellite P300-150 /PSPC4E

  Sorry, I have not analyzed all the discussions for an answer to my probs.

  Sincere friendships of Chris

  Normally it should not be a problem to record sounds with a installed and modified Windows XP with nLite.

  But have you tried to install the laptop with the recovery disk? Try this!
  The recovery disk contains all the drivers and tools to use all functions on the laptop and it should work.

• Satellite P300-150 - cannot use a USB

  Hello

  I have a satellite p300-150 with Windows XP PRO SP2 and I can't use any USB key (I can't open) but I can use e.g. USB mouse.

  Thank you
  Fotis

  Hello!

  You can format the USB on the laptop, and you can see it in disk management?
  Do you have the yellow marks in Device Manager?

  This shouldn't be a problem with the USB ports, I think that the USB have some errors.

  Good bye

• What can be done to improve the performance of the Satellite P300-150

  Hello

  I have laptop Satellite P300-150.
  It seems powerful enough but struggles with some of the latest games.
  It s not my main but game machine I m aware if he's struggling now, it won t well before he won t be able to run at all.

  And I wouldn't be able to play on the move...

  What can be done to increase the capabilities of the laptop - like tweaks, tools and upgrades?

  Thank you
  Max

  Hello

  You could improve memory to 4 GB of RAM.
  The laptop can be upgraded to 4 GB, but note that the Windows 32 bit OS (Vista & XP) will see only 3.2 GB due to the limitation of the 32 bit OS.
  In this case, you must use the 64 bit OS to get full access to 4 GB.

  Second, you can configure laptops OS. I mean you could start the msconfig and might turn off some background process is not necessary including the performance of laptops of waste.

  Unfortunately, other upgrades are not possible (apart from HARD drive, but will not increase performance)

  See you soon

• Installation of drive HARD recovery does not start on Satellite P300-150

  I have a 2008 Satellite P300-150 I want to restore factory settings.

  I followed the steps described in the manual of s to do it from the hard disk (F8 at startup), however, when I try, a screen will appear with a warning with the topic box"system recovery options"then below says "cannot start the installed program. Click ok to turn off the computer.

  I don't know m which is better to do it now if someone could suggest another way to do this, I would be very grateful.

  Thank you

  The situation is quite simple to explain. Recovery image installation can be done on two tracks:
  -using the HARD drive recovery or
  -using the create recovery DVDs.

  I put t know if you created this disk after advice from Toshiba, but if you use for the installation of operating system.

  By the way: Satellite P300 works perfectly with Win7 32 bit, so if there is a way to install do. It works much better than original Vista.

  If you have any other questions you are welcome. ;)

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon

• WiFi with the Satellite P300-135 problem

  Hello

  Here's my problem:

  I removed VISTA and installed XP on my Satellite P300 - 135 (PSPC4E). After that, I downloaded all the drivers for XP and installed. But the wireless card is not recognised and in Device Manager there are two features of problem:
  -Device on high definition audio bus modem and
  -Network controller.

  I remember well the type of my wireless card and tried first with Realtek, but it did not work. Then I tried with Intel and Atheros drivers, but they do not have too much work.

  I hope someone can help me, because I don't want to go back to VISTA.

  Hello

  According to the specifications of the laptop Satellite P300-135 has Intel 11 a/b/g (13ch) - Golan WLAN card.
  Have you tried installing WXP driver for WIRELESS Intel network card?

• Serious cutting problem with HDMI HD output a7s

  I am a filmmaker from THE base and possess an a7s & package Odyssey 7 q + recorder camera.

  I just noticed a serious technical problem that must be addressed. When shooting video with the A7s, the component of luminance of the HD which are sent via HDMI signals are cut to 100IRE, no matter what profile picture gamma setting is chosen. I can see it in the waveform, the chrominance information is not cut exceed 100IRE. For example, when I turn the curve of gamma slog2, exposed blue sky just before clipping has kept above blue channel 100IRE, but more balanced information clip of signals (such as a piece of white paper).

  This problem does not appear in the output HDMI 4 K or record XAVC-S internal. It is true both of these formats. It is specific to flow out of the HDMI port uncompressed HD video. I'm sure that it is a firmware issue.

  This conclusion came after I noticed it during a shoot and have led to extensive testing. I would prefer a real difficulty as opposed to workaround, because it cut a stop of information from the latitude to highlight whenever I have to shoot 60 p or don't want to shoot 4 K.

  Apparently, it's a problem with the recorder of Odyssey is not correctly interpret the sony exposure output scaling. Convergent Design is working on a fix to include with their next update of the firmware. I see this problem on Shogun I tested.