Problems with HDMI output

Similar Questions

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Serious cutting problem with HDMI HD output a7s

  I am a filmmaker from THE base and possess an a7s & package Odyssey 7 q + recorder camera.

  I just noticed a serious technical problem that must be addressed. When shooting video with the A7s, the component of luminance of the HD which are sent via HDMI signals are cut to 100IRE, no matter what profile picture gamma setting is chosen. I can see it in the waveform, the chrominance information is not cut exceed 100IRE. For example, when I turn the curve of gamma slog2, exposed blue sky just before clipping has kept above blue channel 100IRE, but more balanced information clip of signals (such as a piece of white paper).

  This problem does not appear in the output HDMI 4 K or record XAVC-S internal. It is true both of these formats. It is specific to flow out of the HDMI port uncompressed HD video. I'm sure that it is a firmware issue.

  This conclusion came after I noticed it during a shoot and have led to extensive testing. I would prefer a real difficulty as opposed to workaround, because it cut a stop of information from the latitude to highlight whenever I have to shoot 60 p or don't want to shoot 4 K.

  Apparently, it's a problem with the recorder of Odyssey is not correctly interpret the sony exposure output scaling. Convergent Design is working on a fix to include with their next update of the firmware. I see this problem on Shogun I tested.

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon

• I have a NVidia GTS450 with HDMI output. When I connected it I had sound & vision. After the first time that I turned off the desktop computer sound options just told me THAT HDMI is not connected?

  I am running Vista Home Premium 32 bit. It does not seem to recognize the connection although it is really connected and one / v amp is running. I get the desktop on the HD TV but no sound.

  Hello

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  a. click on the button 'start '.

  b. click on 'control panel '.
  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
  e. This will bring up a window titled "Sound".
  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
  g. There should now be a checkmark on this option.
  h. the sound should play through your HDMI connections to the TV.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Problems with HSRP output

  Hello dear!

  I have the following topology:

  Cisco 3845 gi0/0 - switch Foundry - fa0/0 Cisco 7206VXR

  CISCO 3845 *.

  interface GigabitEthernet0/0
  IP 192.168.80.90 255.255.255.128
  no ip proxy-arp
  IP accounting output-packets
  full duplex
  Speed 100
  media type rj45
  standby 2 ip 192.168.80.89
  standby priority 2 130
  LAN service-policy input

  CISCO 7206 *.

  interface FastEthernet0/0
  IP 192.168.80.91 255.255.255.128
  no ip proxy-arp
  Summary-address eigrp 100 IP 172.31.255.0 255.255.255.0 5
  full duplex
  Speed 100
  No cdp enable
  standby 2 ip 192.168.80.89
  standby priority 2 150
  2 standby preempt delay minimum 60
  standby 2 track Serial6/0 80
  LAN service-policy input

  This devices run HSRP, but I been out following diagnosis in two routers using 'show Eve '.

  See the day before

  Cisco 3845 *.

  FastEthernet0/0 - group 2
  The State is active
  2 state changes, last state change 5w6d
  Virtual IP address is 192.168.80.89
  Active virtual MAC address is 0000.0c07.ac02
  Local virtual MAC address is 0000.0c07.ac02 (the default value of the v1)
  Hello time 3 sec, hold time 10 sec
  Next Hello sent to 1.488 seconds
  Enabled, preemption delay dry 60 min
  Active router is local
  Standby router is unknown?
  Priority 150 (150 configured)
  Follow the State of Serial6/0 interface Up decrement 80
  The name of IP redundancy is 'hsrp-Fa0/0-2' (default)

  See the day before

  Cisco 7206VXR *.

  GigabitEthernet0/0 - group 2
  The State is Init (interface to the bottom)
  Virtual IP address is 192.168.80.89
  Active virtual MAC address is unknown
  Local virtual MAC address is 0000.0c07.ac02 (the default value of the v1)
  Hello time 3 sec, hold time 10 sec
  Pre-emption turned off
  Active router is unknown?
  Standby router is unknown?
  Priority 130 (130 configured)
  The group name is "hsrp-Gi0/0-2" (default)

  I can ping to both devices using the virtual ip address.
  The work around to solve the lines ' active router is unknown and standby router is unknown "are remove the hsrp configuration in the watch system, after the issue is resolved, but came on after a few days.
  The problem is that I have not access to the Foundry switch but I think that HSRP configuration have no problem, even in the buffer, I did not see any problem with HSRP.

  Someone have similar problem or any idea?

  Thank you more

  Hello

  I would try

  (a) using HSRP worm 2 (see http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp_ps6922_TSD_Products_Configuration_Guide_Chapter.html#wp1102891 )

  (b) looks a little stange me have first refusal configured on a router only.

  (c) there could be some problems with your multicasts to send/receive of Foundry switch used by HSRP?

  HTH,

  Milan

• Problem with analog output card FPGA 7851R

  Hi all

  First of all, I am a beginner in FPGA programming.

  In my application, I'm generating an analog voltage, for example 6V in a FPGA 7851R card is placed in 1033 PXI. I'm passing this tension to an another PXI with LabVIEW RT. Instead of getting a continuous 6V I'm getting some spikes with 6V. I enclose the screenshot of waveform which has obtained in PXI with RT the PXI card used is PXI-4462. I also enclose the code. Why am I getting this ears? Will there be another procedure to generate a continuous signal? Is there any problem with the acquisition?

  Please help me

  Thank you & best regards

  Rajesh R. Nair

  Thanks sumit.

  Problem is solved!

• Toshiba 22L1334G problems with HDMI

  First of all, thanks to all for trying to help me :)

  Now let's make the problem: I bought this TV yesterday and I immediately connected on my PC (video card AMD R9 270 X) with an HDMI cable (the cable is Rev. 1.4 and less then 1,5 m).

  The global definition is very good, but I have in fact 2 problems:
  first of all, the colors are very saturated and can't do their natural even if the video card values.

  Second, the text with fonts bit if it's not black is very blurry pixeled, very difficoult to read.

  O Google searching I found similar problems for many people, but they have solved the problems, simply assign the HDMI PC input.

  Unfortunately, they used Samsung or LG screens and there in my Toshiba is not the parameter to indicate the HDMI signal PC.

  What can I do to use this device as a monitor in the right direction?

  Hello

  First of all I must say that this device isn t 22L1334G Toshiba PC monitor but it s a TV that can be connected to the computer via the available RGB (VGA) port.

  Thus, in case you want to connect a computer to this TV and want to use it as an external monitor, you should use the VGA port available

  I must say that I had the same problems in the past with blurry fonts using the HDMI port.
  I connected a device combined monitor/TV and connected my laptop to an external monitor s HDMI port.

  Blurry fonts were really a pain using office applications, but I found a solution; my device supported an additional DVI port and I was able to connect my laptop to monitor cable HDMI-DVI.

  My other monitor takes care of one other manufacturer supports additional parameters to change the sharpness of police so I can use the HDMI port.

• Problems with HDMI Port 3/4 on Toshiba 46xv733

  HY everybody,

  When I try to connect a device (PC, Xbox, or PS4) HDMI1 or HDMI2 (where everything is fine) for HDMI3 or HDMI4 I can't make them work properly. Resolution passes something a cable not only 30 Hz. When I try to change the resolution (on PC) the photo does not match the screen (for large or too small).

  I searched throu the documentation and the Web but can't find info HDMI3/HDMI4 are different from HDMI1/HDMI2.

  The TV is Toshiba 46xv733.

  Any suggestion on how to solve this problem would be highly appreciated.

  Thanks in advance

  Hello

  In [User Guide | http://www.toshiba-om.net/LCD/PDF/English/XV733-32374046-English.pdf] you can find some information that certain HDMI devices at the beginning may not work properly with your latest HDMI TV due to the adaptation of a new standard.

  In this case you must unplug your HDMI cable first, and then try the two options settings. INSTAPORT content type and turn off.
  You start HDMI source should work with your TV.

  The HDMI 3 seems to be a little different from the HDMI 1 and 2.
  3 HDMI supports digital and analog sound.
  HDMI 1 / 2 / 4 supports digital audio ONLY.

  The HDMI 3 must be used in order to receive sound from a PC connected (via HDMI to DVI cable).

• Re: Qosmio F50 - 11Y - what Dockingstation with HDMI output that I can use

  Hello world.

  I'm a newbie here and I just bought the Qosmio F50-11y of www.play.com this morning. Really very happy and look forward to the delivery now. I've been hunting for a laptop for more than five weeks, and as soon as I spotted this laptop I went just for her!

  Just wondering if anyone knows a good station of this laptop in particular. I saw one with a DVI and one with a VGA output on the Toshiba site, but I want one that has HDMI and if possible TV out too. Thank you

  Ground

  Hello

  The G50 cannot be connected to the docking station.
  There is no slot at the bottom of the unit that allows you to connect the docking station for the G50.

  Welcome them

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Strange problem with analog output PCI 6251 and BNC-2110

  I'm controlling current source of third parties using the connectors of analog output on my card PCI 6251 and BNC-2110.

  The current source needs an input signal of 0.1V. I tested it using a battery, the potentiometer and the voltmeter, and by manually adjusting the voltage of power current works - current output with control voltage scales according to the specifications and is relatively stable.

  The data acquisition card works too - when I connect a voltmeter to the AO0 AO1, the measured voltage corresponds to the target with great precision value.

  But when I connect the current source of third AO0 AO1 data acquisition card, the measured output voltage drops and fluctuates. This applies to both channels of the AO.

  I wonder what is the problem here. I suspect it could be a matter of the grounding - the current analog control of the source is an entry with two floating terminals differential. I tried to return the switches FS/GS on the BNC-2110, but that makes no difference.

  Anyone knows similar behavior? Does anyone have any suggestions?

  
  

• Connection to a TV with HDMI output with a Dual-Link DVI adapter

  I have two monitors connected to my MacPro late 2013, an HDMI port and the other on the Minidisplay port (with a Mini DisplayPort to DVI adapter). Then I have a third monitor used for dubbing tracks, (22 in.) connected to an another mini display port with a Mini DisplayPort to Dual-Link DVI. Now, I don't want to connect to the Dual-Link DVI adapter a led TV 40 "in replacement of the monitor 22 '', so that I can make the tracks of dubbing in a better way. But the led TV has a HDMI port. The question is: can I connect the TV led to the Dual-Link DVI adapter, simply using an adapter DVI to HDMI? It work?

  Not used that exact configuration but should work.

  See here to ensure that you do not overload a single BUS:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  Al

• Laptop with HDMI output to a monitor with VGA input?

  I have a pretty new 2011-Dell XPS laptop I want to hang on to my quite old-2005-Dell VGA monitor. I bought a cable that connects them together, but my laptop does not recognize my monitor. Anyone know if a decoder is necessary/useful or if I should give up? Thank you very much.

  HDMI is digital while VGA is analog. So you will need a converter "active." Something like this:
  Conversions technology HDMI to VGA with R/L Audio Converter converter

  You're better off just spending only $121. 03 + $78,96 on a new Dell S2240L which has a HDMI port.

• Problem with VGA output via CDM on XPS 12

  When I connect my XPS 12 via a mini display to VGA to an external monitor, there is no problem. This changes however when I connect it to a beamer/projector. Then it is af if my laptop does not recognize that and I just cannot make it work. When I test the card on my macbook to friends, it does not work.

  Do I need a special for this or is my laptop VGA adapter broken?

  On Windows 7 or 8, I recommend trying the following:

  -Hold down the Windows key and then press the button P to scroll through the choices of the external display

  -First try the only projector choice and test it with Extend or duplicate

  If that does not solve the problem, I do it with the following:

  -Open Intel graphics and Media Control Panel (located in your Control Panel or system tray)

  -Go in the multiple views section and make sure that the mode of operation is not defined for a simple screen

  -   Active displays should show the total number of exits is connected as well (ex: 2 = integrated display + monitor)

  If these two options do not work, you should remove your graphics driver and do a clean install of the latest graphics driver from the Dell support site.

  Kind regards

  -EE