Problems with my Dazzle DVC 170 on Vista (32 bit)

Similar Questions

• Problems with WMC Internet TV (Beta) in Vista 32-bit last month.

  Okay, so for those of you who have read my previous posts on Windows Media Center related problems involving the Internet TV beta edition, you know, I've had difficulties to find a fix for a specific problem where Internet TV will not download and gives the error, "No valid, impossible to launch Application" «...» »

  So a few weeks back I found a good deal on a new material and thought I would upgrade my system to a dual core to Hexa core with a new motherboard with AMD 870/850 chipset.  I added some ram DDR3 and low and behold, when I ran my system I have not had any unexpected problems when you use Windows Media Center to which has been about a month now.  That is, until today!  When exactly the same problem happened when I look one online using WMC Internet TV (beta) news.  The error just after I saw a report, at the start of the Internet TV to connect to the next story in the list after I was watching the story I wanted to.  I clicked on the button back in the upper left corner and the second that I did, my screen instead of going back to the next menu, frozen, and then the blue circle came for about 10 seconds.  I was wondering what was the program, and then the exact error even I had before with my old dual core card mother system returned to the top on the screen and it (until) worked normally.

  Conclusion... no matter what Internet TV (beta) is when it is the transfer of information from the internet to the computer, is likely to damage the hardware.  The solution is to buy a new system, which I strongly think that Microsoft should pay back stop (especially when the review is pretty well the whole computer) when it occurs.

  Except of course swaping on hardware is just one of a few ways to fix the same problem, which I see no answers for in all other positions on the issue.

  Hi JohnDR,

  1. What is the full exact error message that you receive?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Recoding with my Dazzle DVc 100 on Windows Movie Maker (Vista 32 bit)

  I recently bought a Dazzle DVC 100 and recording o startedt. I do not have the program they give you, its just too messy. I used Windows Movie Maker to record my friends XP OS and it worked on him. It has detected my capture card and everything what it. Then I came home and I tried to do it on my Vista, and he says no card capture not detected. I went to the site it http://cdn.pinnaclesys.com/SupportFiles/Hardware_Installer/readmeHW10.htm and found drivers for my OS and my capture card and downloaded but it still does not work. I asked on their live support chat, and they told me to come ask Microsoft so here I am: p.

  Can someone help me please?

  Hello Karan139,

  Thank you for using the Microsoft Windows Vista Forums.

  Have you went to "Device Manager" to check it's not a problem with the card?  Have you tried to remove the drivers and reinstall?  I found a link that specifies this problem and has more information that may be useful.  Please let me know if this helped, or if you're still having problems.

  http://support.Microsoft.com/kb/934543

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Counter strike 1.6 on Vista

  When I run my CS on vista, suddenly an unrecoverable error message on the screen that says "the available memory is less than 15MG!:-some figures.
  What should I do?

  Hi KiwiSwat,
   
  Please use the Forum of responses of Microsoft Windows Vista.
   
  It seems that this problem with CS has been resolved by running it in Windows Xp compatiability mode.
   
  Right-click on the shortcut, choose Properties, compatibility, mark the run this program in
  compatibility mode for: choose Windows XP SP2.
   
  You can also check the below CS forum that talks about the same mistake and was fixed by
  Try the above steps
   
  http://forums.counter-strike.com/counter-strike-1-6/7601-error-available-memory-less-than-15-MB.html
   
  Please let us know if that helps.

  --------------------------------------------------------------------------------
  Nicolas Mathieu
  Microsoft Answers Support Engineer

• problems with connecting business valueapps in Windows Vista

  Have rec'd error Windows indicating that logic ValueApps has stopped working:

  Problem event name: APPCRASH

  Application name: ValueApps.exe

  Application version: 1.4.03

  Fault Module name: ValueApps.exe

  There was an automatic update 27/01/14 and, once again, 12/03/14.  I have Windows Vista (64) and have problems of interface with many business websites (online payments, for example) which I have never experienced before.

  Another file is TBverifier.dll; However, that one has not changed since 08/25/13 and don't seem to be a problem.

  What can I do to fix this?  Looks like this are updates of Conduit, Inc.

  Threads merged, but not deleted because it contains additional information about the problem of duplicate

  Hello

  Read this: http://www.shouldiremoveit.com/ValueApps-78723-program.aspx

  Led load Malware.

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

• Problems with programs that seek to reinstall vista-fresh start

  Hi, I have big problems with vista next to some of my prgrams that worked in the past have stopped working together, I tried to uninstall and reinstal them. I tried to perform a system restore, and it does not work so I can't do a system restore. Ideally I am looking for reinstall fresh vista but the problem lies in the fact that I have no instalation disk, it has not been provided with my computer and now out of warranty. Any help would be greatly appreciated.

  The information below should help you:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have problems with Adobe Photoshop CS4 and Windows 7 32-bit Professiol.

  When I open an image of the bridge, the photoshop Panel is locked on one side of the screen.  The onle way I can get out of it is CTRL, alt, delete.  The problem persists.  I tried to uninstall Adobe and reinstall with no luck.  I called Adobe and they think that there is a problem with the security system in Windows.  Help, please.

  Hey jrcjr,

  This could be attributed to several factors such as conflicts between device drivers, applications, settings of operating system, hardware, and corrupt elements in specific files.

  Basic troubleshooting
  
  1. make sure that the computer meets the minimum requirements for Photoshop.
  2. install all Windows updates. .
  3 re-create the Photoshop preferences file.

  Re-create the Photoshop preferences file to eliminate problems that may cause a damaged Preferences file.

  To re-create the Photoshop preferences files:

  1. quit Photoshop.
  2. rename the \AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp directory Users\ [username] Adobe Photoshop CS4 Prefs.old.
  3 launch Photoshop. Photoshop creates a new Adobe Photoshop CS4 Prefs.psp file.
  If the problem persists, the Photoshop preferences files aren't the cause. To restore custom settings, quit Photoshop, and then delete the new Adobe Photoshop CS4 Prefs.psp file and restore the original name of the previous Adobe Photoshop CS4 Prefs.psp file.
  
  4 restart Windows in a modified mode
  
  See this article for reference:
  
  Restart Windows in a modified mode (Windows 7 and Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404913.html

  5. create the new account administrator (Windows 7 and Vista)
  
  Refer to this article:
  
  Create a new local administrator account (Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404912.html

  If nothing helps, please contact the vendor of software for any help.

  For your reference:
  
  Fix system errors and freezes in Photoshop CS4 (Windows 7 and Vista)
  http://kb2.Adobe.com/CPS/404/kb404897.html

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem installing VB Express 2010 C++ under Vista 64-bit.

  Understand I need SP2, but SP2 does not install, give something of msg on ERROR_. Visual Studio provides installation cannot install VC 9.0 errors. Thanks for any answers

  Is the issue that I can't install Visual Studio C++ because I did not have Vista 64 - bit SP2?

  Or is there something else?

  Thank you

  Install vista sp2 from these links

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Link to stand-alone package

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

• Problems with printer after windows update on Vista

  I am running Vista Home premium 32-bit with SP1 and have an Epson SX215 printer. I have Noton antivirus installed.

  My printer will not respond after installation of recent updates. Remiain of items in the queue for printing and the caanot be deleted. I tried Mr. Fixit for printer problems, but it just crashes evenn after leaving 2 hours to run! I tried the system restore, but I just get a message saying "unknown error found no changes."

  I can solve the problem by resetting the PC to the settings to factory, but when I load these recent windows updates again that the problem comes back.

  Help, please!

  Hello

  What updates caused the problem to occur?

  Look for updates in the update history.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  I suggest that you realize the following methods and check if they help to solve the problem.

  Method 1:

  (a) click Start, go to control panel

  (b) select system and Maintenance

  (c) select administrative tools

  (d) double click on Services

  (e) in the services list, scroll down until you find one called "print spooler".

  (f) make a right clic on "Print spooler" and "restart".

  (g) "suppression" of work will be lost and all work queued in your queue will print.

  Method 2:

  I would completely uninstall and reinstall Epson SX215 printer driver package.
   
  a. open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  b. right-click on the printer you want to remove, click on remove the device and then click Yes.

  If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.

  Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. now, reinstall the printer . Note: Valid link also for Windows Vista.

  Method 3:

  If the above didn't help, restore settings PC and install the updates one by one and refrain from installing the update (although not recommended) which is the origin of the problem.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem with joystick in bag 1 and Vista

  I have a problem of gamepad with Combat Flight Simulator 1. I have a Microsoft batoss precision 2 game controller that until recently was perfect. Then it stopped working in the CFS. I uninstalled and reinstalled several times CFS. I added the script recommended in the joy of - n ° record CFS.cfg. When I go into "settings" I get a message on all two seconds that the joystick has grown from some ASCII signs to others; and I have to re - calibrate. Sometimes as soon as I click 'Yes' I learned from another "change." The joystick works very well in bag 2 and FSX. Any ideas? I have Vista premium

  Suggestions:
  

  Here are a few links to support groups where you can find games experts who answered these questions. Post your problem and someone should be able to help.

  Discussions in the Microsoft Hardware products:
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.mshardware.product&cat=en_US_a8bc369a-5b15-4bb0-a772-f459abd462b1&lang=en&CR=us

  Discussions in the simulators:
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.simulators&cat=en_US_f5c26c4c-9442-4038-ab1e-b3d34006e2de&lang=en&CR=us

  Discussions in Windows Vista Games:
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.games&cat=en_US_9CA88DDB-D18D-FA0E-A366-6E527B0FBA67&lang=en&CR=us

  Discussions in Windows Vista Hardware and devices:
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.hardware_devices&cat=en_US_9CA88DDB-D18D-FA0E-A366-6E527B0FBA67&lang=en&CR=us

  I hope this helps.

  Still, Microsoft!

• Problems with Windows XP Pro to Windows Vista computer networking

  I'm totally frustrated. I got a home network that worked with a PC running Windows XP Home and a laptop running Vista Basic. Then, I added a PC running XP Pro and it has added to the network. He works for a while and I was able to share files and printers. Then all of a sudden I can't access Windows XP Pro PC to Vista Basic laptop and get the following message:

  "\\PC1\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  Not enough server storage is available to process this command. »

  I tried the solutions for the "memory insufficient servier" problem but none of them are working and none of them address the element of authorization. Vista Basic laptop can still access the XP computer at home and the XP Pro computer can access the Vista Basic laptop but the laptop Vista Basic responds with the above message whenever I try to open the files on the XP Pro computer.

  I tried to reconfigure the network from the Vista Basic laptop, but every time I have save the setup.exe on a flash drive network and then try to run is one of the PC Windows XP he says the information is not readable, and I need to rerun the Configuration Wizard from the network on the original computer. When I try to reverse the process by running the Configuration Wizard from the network on XP computers then the Vista laptop, he fails and suggested that I have configure the network manually. I'm sick of this. Can anyone help.

  So I have not tested, but I saw where he works for others.

  METHOD 1: Via local security policy:
  NOTE: This function is for Vista business, integral and Enterprise versions
  only. For Vista Home Basic edition Home Premium, see METHOD 2 below.

  1 open administrative tools.
  NOTE: In the Start Menu or the control panel (Classic view).
  2. click on local security policy.
  3. in the left pane, click the triangle next to local policy.
  4. in the left pane, click Security Options.
  5. in the right-down pane, click Network Security: LAN manager
  authentication level.
  6. click on the menu drop-down and click Send LM & NTLM - use NTLMv2 session
  security if negotiated.
  7. click on OK.
  8 restart the computer.

  METHOD 2: Registry Hack:
  NOTE: This is for Vista Home versions.

  1. open the Start Menu.
  2. in the area of the white line (search), type regedit and press ENTER.
  3. click on continue for UAC prompt.
  4. in regedit, go to :-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Lsa
  5. in the right pane, right-click on LmCompatibilityLevel and click on modify.
  NOTE: If it does not already exist, create a DWORD value named
  LmCompatibilityLevel
  6. set the value to 1
  7 reboot

  MCP. MCDST. LVL 80