problems with publising on catalyst business

Similar Questions

• What's compatible with dreamweaver 20141 catalyst business

  Have lost hours trying to get BC and DW 20141 work, I wonder if indeed these two programs are compatible?

  Has anyone out there got?

  I use no BC.  Have you checked with the Forum's Catalyst Business?

  Business catalyst

  Nancy O.

• Problem with Windows Update - Vista Business 32 bit

  I have continuous problems with the update (classified as Important) Microsoft.NET Framework 3.5 Service Pack 1 and .NET framework.

  This update is always offered to me, but it will simply install noty but I could try

  1. Is there an any secret to work this update?
  2. Is there anything I can do Vista ignore this update and npot spend time trying to download and install it - and also for having me to disassemble the time of everyu tick selection I'll update.

  Thank you in advance.

  F F
  

  Hi Fred Furry.

  Thank you for using the Microsoft Vista answers Forum.

  You can try the following steps and check if we are able to install the update.

  1. click on start, run, type cmd and then click OK.

  2. at the command prompt, type the following commands one by one and press ENTER.

  net stop wuauserv
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\wucltux.dll/s
  regsvr32 c:\windows\system32\wudriver.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 c:\windows\system32\wuwebv.dll/s
  net start wuauserv
  output

  Make sure you disable any security software before installing the update.

  If this does not help, follow the article to manually remove and reinstall .NET Framework on your computer

  Use the Windows Installer Cleanup utility to clean up the State of MSI database for all versions of the .NET Framework.

  And then reinstall all the versions of the .net framework by downloading manually Microsoft Web sites in the link below:

  http://support.Microsoft.com/kb/923100

  NOTE: You can download the cleanup utility mentioned in method 2 of the article mentioned above from
  http://CID-6e60f9c3f18900f8.SkyDrive.live.com/self.aspx/dotnet%20Framework/Dotnetfx%7C_cleanup%7C_tool.zip

  Let us know how it works.

  Kind regards

  Yama - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Contact form on Business Catalyst - Muse CC

  Hello

  I created a website with Muse CC, then I host them on Adobe Business Catalyst with Subscription Plan Web hosting a 6euros.

  My problem: I can not retrieve mails sent to my contact form...

  But on my admin and wrote that I received the e-mail from three... Can you help me?

  Thank you

  Problem solved!

  Contact form doesn't work with @ Hotmail.com, you must create a @gmail account.

• Problem with a structure of business

  I have the following problem:

  I want the structure of the REAL of the largest structure case case to start only when I go through the button and activate the TRUE position. I have observed with the tool probe as the structure is always run in backgroun even if a case is false. I want to start from the first position (the default case) the structure of cases each time I'll go through the button. I hope I made myself clear. Thank you

  Here's what I had in mind.

• Problem with JCA - DB in business

  Hello
  
  I call you to the database with JCA in business, but when the output contains the character ' * & * ' show business ' * & amp *;
  
  For example
  
  OUTPUT OF the comic:_
  
  NT AMERICA & SAN FRANCISCO
  
  RELEASE OF BS_
  
  
  < envelope xmlns = "http://schemas.xmlsoap.org/soap/envelope/" >
  < body >
  < OutputParameters xmlns = "http://xmlns.oracle.com/pcbpel/adapter/db/SGT/PKG_SGT_OPER/PRC_OPER_SRV_DAT_CON/" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" >
  < OUT > AMERICA NT & amp; amp; SAN FRANCISCO < / OUT >
  < / OutputParameters >
  < / body >
  < / envelope >
  
  Published by: user8674403 on 28-ene-2011 10:51
  
  Published by: user8674403 on 28-ene-2011 10:52

  Hello
  In Xml '&' is represented under the name 'and' so its been shown as & make an XML valid.

• Problems with the navigation links in EDIT mode in the Business Catalyst Muse sites.

  Has anyone else had problems with the navigation links / EDIT mode in sites Business Catalyst Muse?

  In EDIT mode, I can't use the list drop DOWN the SELECT DIRECTLY to go to another page or a link. The drafting of the text or label works, but to actually go to a /visit link a hard link is broken.

  

  Others have this problem as well.

  No work around?

  Thank you!

  I have the same problem! Contact BusinessCatalyst today taught me that it is a known bug and have Adobe Muse to fix! LiveChat ticket No. #159685

  When I launched the Web site in may 2015 everything worked well, but since the update of CC, this problem occurred.

  The tip of solution, I received the BC is to always use the navigation menu bar. This does not work for me because my client wants a menu of polaroid...

• Problem with catalyst 12.8 working set memory?

  I run a system Win7 Ultimate x 64 with dual ATI HD5870s inside. After update Catalyst 12.8 today, I noticed a problem with the memory what work has been used by Firefox 14.0.1.

  IS REPRO STEPS
  (1) run Firefox
  (2) open Taskman, sort of working set
  3) http://www.kotaku.com
  (4) use mousewheel to scroll the pane to the right down - load the additional articles for review.

  If you scroll down a bit, you should see Firefox eat a few GB of working set memory in short order. The page starts answers incorrectly at the time and Firefox becomes unstable.

  Note: This problem only repros when Crossfire is enabled. Crossfire is off, there is no problem at all.

  I don't know if it's a v Crossfire Firefox thing, or something new, sent by 12.8 catalyst... but whatever it is, keep your eyes open. I don't have a way to solve this problem yet apart from the stop of Crossfire, which denies the reason why I went with a double solution map in the first place.

  Deactivation of Firefox > Options > advanced > General > browsing > use hardware acceleration when available solves the problem until Mozilla and AMD solve this problem

• Problem with Skype for business

  I downloaded Skype for business and office 2016 on Windows 7.

  I do not see the options "share desktop" or "conference call".

  Kindly help

  Hi Christophe,

  Thanks for posting your query in Microsoft Community.

  Please refer to the procedure below:

  (i) start a conference call

  Make sure that your contacts are available to check their current status first. Then follow the steps below to invite to the conference call.

  1. In the Skype for the main window of business in your contact list, hold down the CTRL key and click on the names of your contacts to select for your meeting.

  2. Right-click on the selection, then click on start a conference call.

  3. Click on a Skype call.

  Your contacts can receive a notification and may accept or reject your application for the conference call.

  Add other people to the conference call

  If you need to add other people to your conference call, you can drag their names in your list of Contacts meeting. Or add them using the menu of people:

  1. In the conversation, in the members pane window, click invite more people.

  2. Choose a person from the list and then click OK. Skype for business calls for you the person and adds them to the meeting.

  (ii) share your screen on Skype for business

  Please refer to the steps to: share your screen in Skype for business

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• A security update for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) cause problem with Catalyst Control Center

  I use the HP Pavilion G6 1117tx with

  AMD Radeon HD 6470 M driver version 8.882.2.0 i.e. graphics card and

  Intel Graphics HD 3000 driver version 8.822.2.0, it came as a complete with

  Microsoft Visual C++ 2010 version 10.0.30319 on the site of sellers.

  And after I installed upgrading security for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) it would cause a problem with the launch of the

  Catalyst Control Center version 2011.0817.2216.38121 the catalyst control center would launch and accident immediately but she always see the process running in the Task Manager.

  I removed all the drivers and the software associated with the control center catalyst with Microsoft Visual C++ 2010 and reinstalled all the package and tried the update, but still the same problem that led me to the conclusion the problem was with the update.

  Assistance would be appreciated. Thank you

  Good morning Mukul,

  Thank you for your response.

  I appreciate your time.

  Please refer to the suggestions marked as answer Andrew.Wu, Moderator on 24 January 2011 and check.
  https://social.msdn.Microsoft.com/forums/vstudio/en-us/10f5ba3a-b0bd-4f53-AC02-fa8634953dd0/Visual-Studio-2010-keeps-causing-display-driver-to-crash?Forum=VSSetup

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Please keep us updated on the status of the issue.

  Thank you

• Problems with config Small Business switch

  Hi, I know that if I read the documentation I will come for answers, but I'd really like some input from someone with more knowledge than me. I have a problem with Cisco SF300, one of the Small Business switches. I have a single interface on my router and I need to separate my internal networks, I thought that one way would be to use VLANs. On my two internal networks a network has D-Link unmanaged switches, the other has the Cisco SF300 I did as follows.

  On the Cisco Switch, all of the default ports for ports of junction. I changed FE1-FE24 and GE1-2 to access ports.

  Created two VLAN and placed FE1-FE24 in VLAN10 (also my management VLAN), GE3 is a trunk Port for unidentified VLAN20, VLAN 20 uplinks to my DiLink switches. This way my unmanaged switches traffic arrives on a trunk on VLAN20 untagged port.

  GE4 is a trunk port and I assigned to VLAN1 untagged, tag VLAN10 VLAN20 tag and. 10 of VLANS and VLAN 20 then to my router.

  The plan was to connect GE4 to my router, but I had two things happen that I can't explain.

  All first as soon as I connected my D-Link to GE3 LAN on VLAN20 came down, I couldn't ping servers from computers etc, all devices are connected to the D-links unmanaged. Secondly, the responsibilities of VLAN changed on GE3 GE4, VLAN 10 and 20 disappeared and only the VLAN by default was assigned, also under settings VLAN my state of interface VLAN for VLAN20 shows people with reduced mobility. One of my FE12 continues also to change VLAN access ports.

  Can anyone offer any suggestions as to what might have crushed the LAN and why change my VLAN. I wrote my config running at startup configuration incidentally.

  I added two screenshots.

  Seriously, I'd appreciate the help.

  Thank you

  Bob

  Hi Bob,

  Could you please post a topology? I can help with this, but it would be much easier that I could see your network.

  Thanks in advance,

  Garrett

• 2 or more forms with "1 submit" button (Business Catalyst Forms)

  I am very new to Ajax and Java

  So I'll need a bit of hand holding on it.

  If it's too much to explain in a post on the forum, I'd be willing to pay someone to set up properly and to explain so that I can repeat on my own $50.

  But here's what I'm trying to do.

  Presentation of multiple forms with single submit button.

  I need to create many many forms, so rather than repeat the basics (details and company info)

  I would just be able to manufacture PARTS of form and then build forms much faster this way.

  The forms I created are for various applications.

  I use the personal and professional contacts as the first 2 examples, but I'm going ELSEWHERE, I also understand according to the form.

  So just keep in mind these are examples.

  The point is that each PARTY is a separate form.

  The reason clear to achieve is to save time, many similar applications that I need to do the construction.

  Example 1

  Form of home insurance

  SECTION A - personal information

  PART H - home (s) address

  PART F - personal fire and alarm information

  PART C - the previous insurance issues and cancellation insurance

  ----------------

  submit button: supports all 4 forms above

  Example 2

  The company insurance form

  SECTION A - personal information

  PART B – business contact information

  PART D - commercial address information (what to do if several addresses?)

  PART E - business and information fire alarm

  PART C - the previous insurance issues and cancellation insurance

  --------------------

  submit button: submit all 5 forms above

  So ideally, I would need the following requirements.

  1. present the single button

  2. present the code can handle 2 or more parts not the value # specific

  3. I would prefer if it was automated code (so I don't have to change the code every time, I can simply add the parts - and also long ID # or named it will work correctly)

  4. If there is a problem with any PART stop the entire form

  5-

  A question, I had barely know is how "combine" forms a single entity so that they can change it later if necessary?

  * as turn a case, or to award to each PARTY a hidden form variable link #.

  * This is probably best handled with a webapp, Yes?

  Thanks in advance for any help.

  It's all a bit above my level of understanding of right at this moment. So, if anyone can offer help or services.

  Please let me know. I have to get rolling on this ASAP.

  * main problems I have with BC forms:

  I did a lot of work with them recently, so I get a kick of the foibles, but there is always a ton of issues and roadblocks that I meet that requires a workaround solution.

  I wish I knew how to make dynamic British Colombia forms, because the BC is not a data source for multiple selection option, we must create a webapp connection to combine everything.

  Unless there is another way to combine multiple forms, I guess that's what about this discussion/issue together.

  So thank you once again.

  Are you ok with BC being unable to report on the data of the form? Rather than having the fields map to a client-server, you could serialize the form data (in JSON format, perhaps) and submit the entire form in a single field in a form BC, or an element of the Webapp.

  This would allow the form fields to be as dynamic as you can imagine. you will be not restricted to use only the form fields that have been declared in the admin.

  You have to take care around the diagram, because BC does not have an influence or support for that. It also means that when you want to display the data, you will need to go through your own deserializer. In addition, there are length limits to keep in mind.

• Problems with the installation of Adobe Flash Catalyst CS5

  Hello

  I have a problem with Flash Catalyst CS5. I ordered the DVD trail from Adobe Mastercollection CS5 for Mac and tried to install it. At the stage, where I normally should be able to choose, which programs will be installed, Adobe Flash Catalyst CS5 was not controllable. In the description, he said, that a preliminary version of Adobe Flash Catalyst is installed in front of my computer. So I went to programs and deleted the folder of the pre-release version and tried to install a second time, but again he said, Adobe Flash Catalyst CS5 cannot install because a preliminary version is installed. I'm confused about this. Why does still say, that there is an earlier version of Flash Catalyst on my computer, even after that I deleted the file?

  I look forward to your help

  Hey!

  And also, if you have already removed your file beyond recovery, read this thread:

  http://forums.Adobe.com/thread/628678?TSTART=0

  If you need assistance after reading the thread above, both help uninstall provided by Kim, let me know.

  Thank you

  Tara

• Problems with lines of text in the catalyst

  Hello the development team:

  We have problems with the text and flex. One of our files generates 18 errors at the margins of the text, here is a picture with the problems:

  

  This error will not let me run the application we did

  Can I fix it in the Catalyst? How? I have to go back to illustrator, if I do, I can't go back without losing my current job in catalyst?

  Concerning

  No, unfortunately there isn't a way to remove the margins of Catalyst.

• Problems with Windows Vista and Quicken 2010 home and business

  While restoring a quicken 2010 file backup of the Windows XP computer to the Windows Vista-based computer, the categories are not loaded

  Hello

  As you are facing problems with Quicken 2010, I suggest you check the link for support:

  http://Quicken.Intuit.com/support/Windows.jsp