problems with the brush

Similar Questions

• Problems with the Brush tool in Animate - chips of leaves or steps of the finished line.

  Noticed this problem with the Brush tool in Adobe animate - seems to leave a chip or stage of the race over each time that a line is drawn.

  Older versions of flash were perfect, no problems with the brush not tool at least.

  See the video for a demonstration of what I mean:

  Adobe animate (do Flash) - YouTube

  Toby

  Hi Toby,

  We have fixed this problem internally and the fix should be available with the next update to animate CC.

• updated eligible for adobe to solve the problem with the brushes?

  As you know I tryinf to find a solution to my problem with Adobe Photoshop cs5 Extended version with updates more recent - I ve you have a problem with sight corectly overview of brush on my screen and bugs with it - always changing cursor used, exactly this:

  http://www.YouTube.com/watch?v=UAwav8h41o0

  I already have contact INTEL:

  Try to find some updates to my video card: INTEL HD GRAPHICS 3000

  But on El told me that it isn't their problem and they're going to do not help me, they told me that I need to contact APPLE.

  So I contact apple:

  Apple told me that they have no responsibility to 3rd party like ADOBE and their software company: Photosohp CS5 and they me as well as I need to contact ADOBE.
  OK, I try out adobe:
  but I can't find some contact on official site-e-mail, where I can deteailed describe my problem, so for that I'm trying to find information through the forum of the community here:
  PLEASE IF CELA READ SOMEONE FROM THE TEAM OF DEVELOPERS OF ADOBE:
  Can you give some advice how can I solve my problem?
  Thank you very much

  Wait 10.7.3 out. The rumor that the bug to Apple graphics driver for the Intel 3000 has been corrected.

• Problem with the brush CS4 tool 'paint inside of fashion'

  When I use the Brush tool in Flash CS4 in "Inner painting" mode it erases the part of the lines around the shapes. For rectangles, it clears the line on the side top and left, where the brush head crosses, although he never seems to have an impact on the other sides. The effect is less consistent with ovals, but it breaks the lines in some places. I use Flash CS4 version 10.0.2 on Windows XP, and I checked for updates via the Help menu. Here are two examples:

  

  As I understand it, the Brush tool should not change the race anywhere in this mode. I would be grateful for any help.

  There are very long Flash, at least go back to version 8. I'm not sure, but it certainly affects only two on the four sides of a square. There is a bug on this point, so I'll send it for review.

• Problem with the brush of the Clone Stamp tool.

  I have not had this problem before.

  The brush takes the form of the Clone Stamp tool, that it is in the Toolbox, instead of a circle, as it was before.

  I have not found a solution to help : Brushes Sets the brush. Click the arrow next to the brush sample, choose a brush category from the pop-up menu of the brushes, and then select a brush thumbnail.

  In the photoshop elements Editor, go to Preferences > display & cursors

  and adjust the slider of the paint on normal or full-screen.

  

  MTSTUNER

• problem with the Brush tool

  Hey guys can someone of you help me to try to smooth or to get rid of the shadow of my sharpness of the image. (Im talking about the part of the shadow where this kind of pointer gettting). In my view, that the shadow is kind of ruin. any way to do it? the only thing that happens when I try to smooth that is that he runs everything and nothing is really happening.

  Use the value lighten Clone Stamp tool and a very low opacity (10%)

• Problem with the local adjustment brush

  Problem with the local adjustment brush:

  Tire of a photo with the iso 6400 to a person and I wanted to increase the exposure of the face only. So I set the exposure compensation of at least 4 local adjustment brush, in order to see where I paint. In earlier versions of lighroom I got a smoth black area. My intention was, and then adjust the brightness to + 0.33 in order to get a slightly lighter face. But I have no black smoth area. Instead, I largely perforated black area. After setting the exposure to + 0.33, the face was indeed more light, but with many large tasks very ugly.

  The brush settings:

  Fat / size was 7.1.

  Weiche Kaiser / smoth edge was 50.

  River / stream was 60.

  Dichte / density was 100.

  Automask has been verified.

  Any ideas?

  Maybe it's because you have "Auto mask" checked the.  Uncheck the box before painting to see if that helps.

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• CC of Photoshop is having a problem with the Healing Brush tool

  It comes to my setup with the layer I'm working.

  1 got to Image menu / apply/image layer = bass tones layer (below) / mixture = Add / scale = 2 / and then select reverse. It looks like a high pass filter, but it is not.

  2 Exchange mode layer to linear light that restores the image to its natural state

  When I try to use the Healing Brush tool on my bed to make changes to a face I use the alt key pressed to select the sample point, photoshop seems to block the point that I select.  And he is on the screen in what looks like a high-pass filter, and then when I try to move the brush again point to perform a healing event fullscreen drag with the brush movement.  I don't then deselect the option once I use the ALT key. I've experimented a bit and found that if I hold down the ALT key it removes the high pass, but as soon as I release the ALT key, it goes back in a high pass.   I also tried clicking on this layer and by choosing another layer, the high-pass goes and I can use the mouse to select other items.  But as soon as I go back to the layer that I want to work with the screen comes back to what looks like a high-pass filter and you guessed it, the mouse drags the whole screen.

  Thinking that this might be a problem with Windows, I turned off my pc and rebooted and then restart photoshop and I went back to the same process and have experienced the same problem.  So I'm making this post looking for a solution.

  In the menu of the window display the Panel Source of duplication.

  Is the clipping option at the bottom off? This would cause all of the image to display in the overlay. -What is the opacity of the overlay and blending Mode different 100% and Normal?

  These options are not used with the Spot Healing Brush as it makes its sampling automatically.

• problem with the definitions of the brush

  Hello:

  I just started using Illustrator but I have some experiences with the PS. My operating system: Windows 7 64-bit

  So, I was my way around learning and playing with the Brush tool, but when I went to reset the brush base under brush definitions, there wouldn't be on Basic. Also, when I go to set the different size race he keeps back to 1px.

  Any ideas? Or do I just call tech support Monday?

  Just thought I would ask here first.

  Thank you for your time.

  Have a good day/evening,

  Kara

  The basic means: no brush

  But if you use the Paintbrush tool, it will always use a brush.

  In case you want to draw simple traces brushless, take the pen tool

  In case you want to paint simple lines, use the pencil tool, not the brush

• Problem with the Spot Removal Tool

  The last several times I tried to use the removal tool the place, he did not "heal" the area that I asked for it to heal.  He heals an area adjacent to the area I want to heal.

  Any thoughts on the opportunity, it's a LR bug or something is happening with my Macbook?  I would like to address...

  Note that I ALSO encounter this problem with the adjustment Brush tool.

  (I know I can do this sort of editing in PSCC but for simple stuff like this, I usually use LRCC)

  Thanks for your help! LJB.

  IMAGE: miniature horse headshot for a friend

  screenshot 1: weird grass, I would like to change.

  

  screenshot 2: the area I have hi-limited with spot Healing Brush (it's messy but the best I could do while also doing a screen shot and not to release the spot removal tool)

  

  Screenshot 3: the pin code of the area of selection is completely in the wrong place and my strange blade of grass is still there.

  

  Change the Clone in the Heal and vice versa does not move existing pine. You will have to redo the brush stroke after changing between Clone and Heal.

• Problem with the swap fill and stroke

  Hi guys, I am trying to use the brush to draw lines with Illustrator, but I'm having some problems with the button fill.

  The problem is that when I chose a color fill and a stroke color, let's fill: orange and stroke: black, when I apply a coal with the brush, the colour for filling automatically changes none. Change the line color does not occur, because it maintains the same color.

  If the thing is that the fill color changes automatically zero against any color that I select.

  Any suggestion to solve this problem?. Thank you

  Double click on the Brush tool in the tools palette and switch: fill a new brush strokes.

• Problems with the use of the Tablet

  

  I have recently downloaded the new update, as well as restarted the trial. Whenever I try to use my tablet, he made a line and start the drawing at the end of it, as shown above. In addition, whenever something pops up, such as the box 'save or throw?', I can not click on one of the buttons because it will allow me, I had problems with this in my other trial as well. I would like to help solve these problems, thank you.

  Hi all

  The problem associated with the brush and the pencil drawing in Flash Professional CC 2015 configuration dual monitor with Wacom devices has been fixed in the latest update. Please update Flash Professional CC 2015 v15.0.1.179.

  Rgds,

  Mukesh

• Problem with the tool move? (Win 7)

  On Photoshop CS4, whenever I select the move tool and decide to move an object in a layer, it moves the object off the screen, making it difficult to bring the canvas to move. I know he's not jumping the layers, because only the object within a single layer, I moved, but I'm the only one who has this problem? How should I do?

  He has only this problem with the tool move, but with scrolling text, text tools tool and the Brush tool, as well. The text tool jump out of the screen and the marquee tool would position the tent somewhere else when I clicked on it to be the Brush tool sometimes jumped on the outline of the brush. Can anyone help?

  Market and stop over the years, I found that Photoshop itself could corrupt if used for a long time.  Or he might not.

  That's how (or if) it does seems to vary depending on other factors.  With some display drivers, for example, sometimes much more.  A particularly frustrating event is when Photoshop just stops where you try a file - save as.  Another, quite common, is that multiple instances of Community Help just start to open jerky.  But probably no matter much what look like symptoms; the source of the corruption, which has been expired for a long time.

  I don't think that it's just a problem, either, but probably several - at least a part of which are due to bugs in the drivers.  From time to time, we hear about specific versions of display drivers, for example, that have been seen to increase the likelihood of corruption.  And some, like ATI Catalyst 11.7 earlier this year, seem to minimize problems.

  What I don't know, because I don't use a Mac, is whether the same situation exists on this side of the fence.  In my heart of hearts, I suspect that it does.  Maybe it has to do with models of memory used under the covers.

  I * CAN * tell you that CS6 is not available yet.

  -Christmas

• Problems with the CS3 pressure sensitivity

  Hiya! As the title says, I have problems with the pressure sensitivity in CS3. I use a HP Pavilion tx2000 (or, more precisely, tx2115nr) tablet PC hybrid. I used the help function to see if my brush settings were set correctly... but it seems that just CS3 is not save that I use a tablet at all (it shows a yellow warning triangle little warning that I need a Tablet for pressure sensitive settings;) I don't know if it is supposed to do or not). I used a (sorely outdated) version of Photoshop that worked very well with my tablet PC, and I find it rather disheartening that CS3 does not work... someone can help me solve this problem?

  If I'm missing any information needed to help solve this problem, just lemme know and I'll send it as soon as POSSIBLE.

  You have the latest drivers for the Tablet installed?