Problems with the WLAN configuration

Similar Questions

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• What is the problem with the BizTalk configuration tool?

  I just installed BizTalk Server 2010 (developer edition) and I restarted my computer, but the Configuration tool will not charge. Instead of loading the configuration tool, a dialog box displays saying "another instance of this program is already running" with the title saying "error". I am sure that no other instances of the configuration tool are already running. What's not here? If anyone can help me, that would be greatly appreciated.

  Hi NateKoepke,

   
  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems with the installation of BizTalk Server 2010. Please correct me that I misunderstood.
   
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/biztalkgeneral/threads/

• Problem with the SOA Configuration - to be able to configure the FCM or tax supplies - Oracle EPM 11.1.2.4

  Hello gurus,

  I followed the steps below to configure Oracle SOA on Windows Server 2008 R2.

  1 update the file hosts with the IP and hostname

  2 disabled IPv6 teredo

  netsh interface set disabled state Teredo

  3. restarted the machine

  4. start SQL server and SQL Agent services and browser.

  5. a SOA database created with owner - his

  6. run the following queries on the database - master selected on the upper left corner of management studio

  ALTER database SET of SOA READ_COMMITTED_SNAPSHOT ON

  ALTER database SOA COLLATE SQL_Latin1_General_CP1_CS_AS

  7. restart of SQL server and SQL agent services

  8 copied the instjdbc.sql file and the file x64sqljdbc.dll from the WL_HOME/server/lib to Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\

  9 renamed the file x64sqljdbc in sqljdbc.dll

  10. navigate to C:\Program Files\Microsoft SQL Server\100\Tools\Binn and run the following command

  SQLCMD. EXE "FUSION1124" s - U SA Pei test #123-i c:\log.txt o "C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\instjdbc.sql '.

  11 activated XA transactions in Windows-> DTC Local components services

  12 restarted SQL server and SQL agent services

  13 copied rcuHome utility for drive E and repositories created for SOA

  14. the value of Unicode support - NO (tried with Unicode on YES and NO both setting)

  15 PREFIX - value DEV

  16 selected - services Infrastructure, SOA, Messaging user and metadata Service

  17 passwords schema - test #123

  18 repo created successfully

  19. restart of SQL server and SQL agent services

  20 copied directory SOA for drive E

  21 install SOA - setup.exe - jreLoc E:\Oracle\Middleware\jdk160_35

  22 oracle Middleware home - E:\Oracle\Middleware\

  Directory of Oracle Home - Oracle_SOA1

  23 configuration started Oracle SOA

  24. create the new Weblogic domain

  25 selected

  -Oracle SOA suite

  -Oracle Enterprise Manager

  -Oracle WSM Policy Manager

  -Oracle services JRF asynchronous Webservices

  -Oracle JRF

  26 domain Name: EPMSystem

  27 powers

  Username - weblogic

  Password - test #123

  28. mode of production

  29. component JDBC schema (all selected)

  Seller: SQL

  The schema owner: his

  Schema password: test #123

  DBMS/Service: SOA

  HostName: FUSION1124

  Port: 1433

  30 connection succeeded

  31 creating the field of SOA

  32 restarted SQL server and SQL agent services

  STARTING THE SOA SERVICES

  31 start Weblogic Admin Server

  32. start the server managed by SOA

  Navigate to the following location in the cmd

  E:\Oracle\Middleware\user_projects\domains\EPMSystem\bin

  Run the command - startManagedWeblogic.cmd soa_server1

  While the Weblogic Admin service starts successfully, the SOA service does not start correctly. The "soa-infra' down remains.

  I'm stuck and not able to resolve the issue for some time now. -What are the steps I doing wrong or missing?

  Please advice.

  The problem is resolved.

  Perform step 11 first and then step 10, which would solve the problem.

• Problem with the new configuration of the computer

  Hello. Read some guidelines for the installation disc in a new PC and I would like to ask for your help with my setup:

  My PC is msi x99a sli + i75820k, 32 GB of ram, msi gtx970, I use the CS6 version

  The problem is with the installation of drive: Samsung 950 pro ssd 512 GB, the SSD ultra more than 256 Sandisk, Toshiba 3 to dt01aca300

  The Sandisk SSD will be my OS, programs + pagefile

  The thing is: raw material should stay on the slower toshiba or should I put it with projects and media on the fastest ssd cache?

  The default location for them being on a SATA III SSD, I just leave them in the default location on the boot drive in the users folder.  Since they regenerate if necessary there is no reason to check them, just delete the every once in a while

• Hanging Hyperion Distributed Environment to VM - problems with the DB configuration

  I prepared our torches and pitchforks to March at Redwood Shores, on this

  OK here you go, we are on a distributed environment three box, Oracle EPM 11.1.2.1, Windows 2008 SP2 (not R2) with databases SQL 2005 SP2

  We try to go to a virtual machine environment that is Windows 2008 R2, Sp1, SQL 2008 SP1 (I think on the SP) (even distributed structure, 3 images for essbase, for a web-EN of the report)

  We take a picture of our production to be applied in the VM, upgrade and secure DBs to 2008 and try to run the Setup.

  Sometimes we are bombing in various areas, that the services do not start, missing components, configuration failed, you name it.

  Someone had as much heartburn the transfer of an image of a box of existing production to another box?

  JTS

  OK so we just got the phone with Oracle and they are not favorite images-clapping fans either and were impressed that we got the system at least partially upwards.  Fine support oracle mode, we asked what is causing the conflict which we got the answer "I don't know".

  why we went this route is because during our dev environment set up, we had a horrible time migrate all Bishop calc (11.1.2.1 to 11.1.2.2) business rules so that we wanted to avoid this problem

  We will build from scratch on the new environments but want to build to 11.1.2.2 and migrate BRs, but do not find effective and smooth.  So we will probably build 11.1.2.1, download our existing applications, then migrate to 11.1.2.2 then migrate BRs

  If you have a better way to migrate the BRs I'm all ears

• Problem with the Audio Configuration

  All of a sudden, I can't play Itunes, Windows Media Player, bec.of this audio configuration problem. I prefer not to take it to get fixed, can get expensive. Anything I can try/do, before having to take in? I have zero noise, my speakers don't work either, for no apparent reason...

  Hi nan18,.

  You could check in the Device Manager; Make right click on my computer then left-click on Properties, and then click the hardware and Device Manager.  Check if there is no yellow exclamations next to all audio devices, if there is then try to uninstall all the drivers sound card first to the Add / Remove Programs, restart your system and then reinstall the audio drivers. You need to restart your system to see if your audio works again.

  The problem you are experiencing may have been caused by an infection, but may also be due to a failure / interrupted the update of Windows.

  In some cases, that I've been able to solve the type of problem you encounter in doing a complete reinstallation of Windows XP, but this is a last resort!

  Let me know how it goes anyway.

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Problem with the server configuration tool Web + APSB07-02

  Recently, I applied the updated connector in APSB07-02. Today, I tried to create a connector to my new cluster CF and get the following error when you use the Web server configuration tool:
  
  "The JRun servers on host 127.0.0.1 must be upgraded to use this version of the Web Server Configuration tool"
  
  FC 7.0.2HF1
  JRun 4 Updater 6
  W2K3 SP1
  
  Is date referring too?

  The article for the hotfix has been updated. Step 7 Installing multiserver in the article also says to the jrun-hotfix - 65311.jar and save in {jrun_root} \servers\lib. This can cause problems if there are already fixes in the {jrun_root} \servers\lib. Step 7 will be changed to have the jrun-hotfix - 65311.jar put in another directory, then change the java.class.path in the {jrun_root}\bin\jvm.config file so that the jar file is at the front of the class resembles the following:}

  Java.class.Path={Path-to-jar}/JRun-Hotfix-65311.jar,{application. Home} / Servers/lib...

• Problem with the alert configuration

  Hello.

  Well, I have a problem when a change to an alert (this would activate when free disk space is less than 10%), when the percentage of free space is 83% alarm color is red.

  I am doing wrong?

  Thank you

  Hi Leonard,.

  You do not have something wrong. The red color is something that we felt as unhealthy. It's natural behavior.

• I have a problem with the installation/configuration of Creative Suite Design 5.

  Everything is normal on installation and activation, but when I try to run no matter what application (Illustrartor, InDesign) this error: "Setup error. "Error: 5.

  Thanks for your help.

  Configuration error 5

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• problem with the configuration of the channel of width 40 mhz on Aironet 1141

  Hello

  recently we bought the model cisco aironet AIR-AP1141N-E-K9 stand alone.  After you have configured it, customer has no problem with the connection and the cover, but there is problem with passage. clients are unable to connect to higher rates, even if I set the width of the channel to 40 mhz, the maximum for compatible client device N rate is 54 mb. 

  can someone give me some advice how to fix this?

  This is my setup, or see attachment file

  http://pastebin.com/1WHeSvmq

     

  Thank you very much

  Please change the encryption used by AES.

  Here's more information: http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a3443f.shtml

  THX //art