Problems with USB 3.0

Similar Questions

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• HP 255 g4: problem with USB and SM Bus controller

  I have a problem with the (USB) Universal Serial Bus controller and SM Bus controller.
  System identifies them.

  
  I installed all the drivers for my noutbook of this site, but it does not work...
  Please, help me!

  I believe that these devices are based on the AMD chipset driver package... USB 3.0 and SMBus Controller:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%2010%20-%2064

  Top package. @Paul_Tikkanen will know for sure.

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

• Satellite P300D-14F - problem with USB

  Hello

  I want to make a USB to boot, but the laptop does not recognize (I mean in the bios)

  For example, when I connect the external hard drive (1 TB, Hitachi HDT721010SLA360) I can see it in the Start Menu (http://s017.radikal.ru/i432/1202/20/b7b7edd221f9.jpg)

  But when I connect my USB drive (Transcend JF V30 / 4Gb, JetFlashTS4GJFV30) I have not even USB option in my Menu of Boot (http://i021.radikal.ru/1202/67/6bae3812f88c.jpg)

  Have problem in my USB?
  If so, could you please tell, what are the usb key properties must work properly, so that I could do the usb startup key.

  P.S.: on the first time 1 TB of HDD and USB connected photo (also connected SAMSUNG HD501LJ 500 GB), the second peak connected the USB _only_

  Hello

  To my knowledge, it there has not of special requirements to the USB flash key, a common USB should be recognized correctly as boot device.

  Of course, it might be possible that there is a problem with your USB key
  On the other hand, it might be possible that your USB drive is not formatted correctly.

  I think you need to format the Flash DRIVE to FAT32 standard and need to make it bootable.
  If this does not help, try another USB flash memory.

  Good luck

• Problem with usb boot on Satellite A-50

  Hello
  I had a problem with a usb tip. When I insert a usb key, I can't start my computer by usb. I selected the option of a disk boot, but doesn't run. I have a "Satellite A-50-522. I have to update the bios?

  Greetings,

  Hello

  You can try to press F12 when the Toshiba screen! A small start menu appears. Choose USB - FDD and then it should work.

  Campino Bye

• Satellite L870: Problem with USB to serial interface with FTDI chipset

  Hi all

  bought a L870 year last to run software amateur radio via USB to the serial interface.
  Interface uses the FTDI chipset.

  The problem I have is that the switch on the led on the interface flashes green to red several times to indicate that it works, but then must remain on green but task on every minute she goes through the same process again.

  All the controls on the drivers and the Manager of devices indicates that everything is ok. No problem with interface on computers laptops happens or advent.

  Is there anything on the Toshiba laurys usb ports every minute.

  Thanking you in advance for any ideas

  First of all, I must say that there are different models of L870 Satellite on the market supporting different hardware and software. Some are preinstalled with 8 and some Win with Win 7.

  In addition the L870 supports USB 2.0 and USB 3.0 standard.
  If you recommend to check the different USB ports and check if your software works correctly with the USB 3.0 standard.

• Problems with USB devices in Windows XP Mode on Windows 7 Pro

  I have a Palm Zire 21 that I use with ACT! Contact Manager to keep track of my appointments.  I was able to sync the Palm with my ACT database until this week. The device appears on the list of USB devices, but does not connect to Windows XP mode.

  I used this device in XP Mode since August without any problem.  Last week, I started having problems with the integration of XP features and had to uninstall and reinstall the integration features a few times.  I think I have a corrupted somewhere driver.

  Any help would be appreciated.

  No need to comment unless you have more insight.

  I solved the problem myself.  In XP mode, I went to the Device Manager and scroll down to USB controllers.  A virtualization USB bus drivers showed a problem.   I uninstalled this device and then managed to reinstall my Palm correctly after connecting it to the USB port, and then going back to the menu at the top of the XP USB mode screen and hit connect when I saw my camera.  The device connected in XP automatically and I was off to the races.

• PROBLEM WITH USB PORT

  I HAD PROBLEM WITH MY (USB) PORTS... WHEN I CONNECT DEVICES WITH MY COMPUTER, IT SHOWS THAT THIS MOTTO IS NOT RECOGNIZABLE TRY SOME OTHER CONNECTION FEATURES... I CHECK MY DEVICE MANAGER AND HIS WATCH THAT THE DEVICES WORKED PROPERLY I WASN'T THE PROBLEM, IT IS... HELP PLZ

  Simple method is to unplug all your usb device, turn off your system (power off) press the power for 5 seconds (while it is turned off), then turn on your system. Leave the window and then try to connect your USB device one by one... Should be detected and installed, if necessary.

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.

• Problem with USB 2.0 Driver

  I'm having a problem with the USB 2.0 driver. Whenever I connect my USB drive, I get a notification of an unknown device and I also used the troubleshooter to solve problems, but he said-

  An unexpected error has occurred. The Troubleshooting Wizard can not continue.

  Identifier of the package: DeviceCenterDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: Chinmaya-PC\Chinmaya

  Background: high

  Every time that I find this error code while troubleshooting the USB 2.0 driver. I even tried reinstalling the driver, but it's the same thing over and over again. I also tried to install Microsoft Fix it, but it won't install, it says "Microsoft Automated Troubleshooting Services BootStrapp has stopped working". Someone at - it this same error? I can't even connect a USB on my computer because of this error.

  If anyone has an answer, I would be very happy to know.

  Hello Chinmaya,

  Thank you for the update on the issue.

  Before any change in the registry, I highly recommend you back up the registry. You can see How to backup and restore the registry in Windows as described in the previous answer.

  UpperFilters and the LowerFilters are assigned values in registry keys. Upper filter drivers go between the operating system and the principal driver, and the lower filter drivers between the driver and the hardware.

  You can try the suggestion and let us know the result, we will be happy to help you.

  Thank you.

• PROBLEM WITH USB CANON PIXMA MP550 PRINTER PRINT SPOOLER

  I have a problem with the main PC.  No printer is displayed in the Control Panel printer page. When I try to add a printer the message tells me that the print spooler does not work.  I also get the error: "error 0x000006e". I tried all the usual bugs (via Services', etc.) without success.  Gives the print spooler to think it's on; I have reset several times and he shows IT, but it does not work, says the message I get when trying to add a printer.  I have attached the sfc/scannow process found no corrupt files. I tried a 'restoration' without success.

  The laptop can find the printer, a Canon Pixma MP 550 and it works well but the right main PC cannot find all printers in the control panel or through different programs (WORD, etc.) and will not let me add a few.  The home network seems fine and both computers recognize each other and I can access files on the other computer.  But on the PC, there is no printer on the network.

  Also, I tried the canon Pixma MP 550 "My Canon" routine Diagnostics.  It did not find the printer even when it is plugged directly into the PC's USB port.  This could be a problem of LPT 1?  So, I don't know how to access the LPT to reconfigure.

  I also opened OUTLOOK and WORD and tried to add a printer in this way, but I get the message: "the Active Domain Services are currently unavailable.

  Grateful for any help here.   All the usual bugs have been tried.

  Concerning

  Yesterday sorted Arthur Xie method.  See the link;

  http://social.technet.Microsoft.com/forums/Windows/en-us/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/cant-add-printer-print-spooler-crashes-error-code-0X000006BE?Forum=itprovistaprinting

  It was a registry conflict where there was too many folders/files/etc in the current directory. TY anyway.

• Problem with USB on the computer.

  Hi, I'm not very good with computers at all. I have a HP pavilion which all works fine until the other day, now it may just be a coincidence but I plugged my iPhone for the first time and since then none of my USB devices are appearing when I plug them in. his making the noise, but its all just not appearing on my Explorer of files of any suggestion?

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Also check with iPhone Support as there may be a problem with this phone.

  iPhone Support and community
  http://www.Apple.com/support/iPhone/

  ====================================================

  Troubleshooting you can try:

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8/8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are identical (and
  Windows 8/8.1)
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ------------------------------------------------------------------------------------------------

  Install USB 3.0 and other USB devices
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

  Hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Set up your PC - configure your devices
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ===================================================

  If necessary:

  Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">