Satellite P300D-14F - problem with USB

Hello

I want to make a USB to boot, but the laptop does not recognize (I mean in the bios)

For example, when I connect the external hard drive (1 TB, Hitachi HDT721010SLA360) I can see it in the Start Menu (http://s017.radikal.ru/i432/1202/20/b7b7edd221f9.jpg)

But when I connect my USB drive (Transcend JF V30 / 4Gb, JetFlashTS4GJFV30) I have not even USB option in my Menu of Boot (http://i021.radikal.ru/1202/67/6bae3812f88c.jpg)

Have problem in my USB?
If so, could you please tell, what are the usb key properties must work properly, so that I could do the usb startup key.

P.S.: on the first time 1 TB of HDD and USB connected photo (also connected SAMSUNG HD501LJ 500 GB), the second peak connected the USB _only_

Hello

To my knowledge, it there has not of special requirements to the USB flash key, a common USB should be recognized correctly as boot device.

Of course, it might be possible that there is a problem with your USB key
On the other hand, it might be possible that your USB drive is not formatted correctly.

I think you need to format the Flash DRIVE to FAT32 standard and need to make it bootable.
If this does not help, try another USB flash memory.

Good luck

Tags: Toshiba

Similar Questions

  • Satellite M70-190 - problem with USB

    Hello!
    After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
    If anyone idea about this problem?
    PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
    I m hoping someone out there can help with this problem.

    If I understand you well you don't have problem with USB port, but with a single USB device. Right?

  • Satellite P300D 10V - problem with TV OUT

    Hello!

    I have a card ATI HD3650 in my Toshiba Satellite P300D 10V model and I can't use my TV out!
    It does not work! How to start!

    I use a newer driver of origin! With the previous driver output TV not too worked!

    Kind regards!

    Hello

    The laptop seems to support a 4pijn s-video port and HDMI port.
    Which port you use to connect to the TV?

    You can use both and it only depends on the available on television port.
    Choose the right channel on the TV and then use the FN + F5 key combination to switch to the TV out.

  • Satellite C850D-115 - problem with USB 3.0 port

    Maybe you are my last chance to solve this problem.

    I bought a C850D-115 PSC9UE-00N00MGR without BONES. I've installed two times Windows 7 top on two different partitions.
    I downloaded and installed all the drivers needed from the Toshiba site and updated on day of Windows 7.

    My problem is, the driver for USB 3 AMD do not work,
    My 3 USB ports do not work and I cannot use it. It will work if I disable the USB 3 and use it as USB 2.

    Device Manager says driver is not installed, while AMD Catalyst Control Center says driver is installed and running.

    Someone knows how to fix this?

    Hello

    Toshiba technical page shows the laptop supports 2 x USB 2.0 ports and 1 x USB 3.0 port

    I m wondering how did you test the USB 3.0 and selected the correct port?

    You said that you have installed all necessary drivers have you installed all the drivers available from the Toshiba page?

    I found this [USB 3.0 driver v2.0.7.176 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7516 selSh ortMod = 3620 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 87792 & OSI D = 30 & driverLanguage = 42]

    Have you installed it?

  • Satellite P300D-12Y - problems with the support of the multimedia button/buttons

    Hello
    first sorry for my English bad propably.

    I had a problem a few days ago, I heard yesterday.

    On my laptop, I have 6 keys for some functions.
    Here is a picture where you can see what buttons I mean. I mean the six buttions between the speakers.
    [http://img444.imageshack.us/img444/5307/dsc00087cz.jpg]
    Play, Stop, Rewind, forward buttons are working perfect.
    But the button that should turn off the lights of the buttons and other lightning does not work. The other button which should start windows media player does not work or the other.
    In the Toshiba Software button Support I tried to add buttons to the duties, more than once. I also tried to reinstall.

    Is there a solution?

    Try to reinstall the package of added value.
    Remove the preinstalled version, reboot the laptop and install the latest version, you can find on the download page of Toshiba
    -http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  • Big problems with USB devices

    Since I upgraded to El Capitan I have several, serious problems with USB devices:

    1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

    2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

    The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

    Hello Gulliver,

    It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

    I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

    Thank you for using communities of Apple Support.

    Sincerely.

  • Problem with USB HUB using Windows 7 on Bootcamp

    I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

    Hello

    I suggest you to see link and check.

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    I also suggest you to contact the apple support and check.

    http://www.Apple.com/support/

  • Satellite P300D-14F - strange problem with an HDMI cable

    I have some problems with the HDMI on my P300D-14th:
    until yesterday everything worked perfectly, but now I can't watch video on my TV (Toshiba REGZA).
    TV's with black screen (when the laptop is off - screen is blue).
    Problem is not in the cable (I have 2, second I ve bought today).

    And HDMI works (but also not good) when I open the BIOS on my laptop:
    http://S007.Radikal.ru/i302/1201/F8/8a363ffeeb16.jpg http://s15.radikal.ru/i189/1201/26/a42111548da0.jpg
    (TV foto, on all the laptop works perfectly)

    on TV, I have 2 HDMI, but neither first second step do not work...

    My OS is Windows 7, but I also have tryied on Ubuntu Live CD.

    I think the problem is HDMI on laptop, but I don't understand why it works in the BIOS...

    Hello

    This means that you can see the page of the BIOS on the TV?
    Have you tested the FN + F5 key combination once Windows has started?

  • Problem with usb boot on Satellite A-50

    Hello
    I had a problem with a usb tip. When I insert a usb key, I can't start my computer by usb. I selected the option of a disk boot, but doesn't run. I have a "Satellite A-50-522. I have to update the bios?

    Greetings,

    Hello

    You can try to press F12 when the Toshiba screen! A small start menu appears. Choose USB - FDD and then it should work.

    Campino Bye

  • Satellite L870: Problem with USB to serial interface with FTDI chipset

    Hi all

    bought a L870 year last to run software amateur radio via USB to the serial interface.
    Interface uses the FTDI chipset.

    The problem I have is that the switch on the led on the interface flashes green to red several times to indicate that it works, but then must remain on green but task on every minute she goes through the same process again.

    All the controls on the drivers and the Manager of devices indicates that everything is ok. No problem with interface on computers laptops happens or advent.

    Is there anything on the Toshiba laurys usb ports every minute.

    Thanking you in advance for any ideas

    First of all, I must say that there are different models of L870 Satellite on the market supporting different hardware and software. Some are preinstalled with 8 and some Win with Win 7.

    In addition the L870 supports USB 2.0 and USB 3.0 standard.
    If you recommend to check the different USB ports and check if your software works correctly with the USB 3.0 standard.

  • Satellite C650 problem with USB ports

    Hello

    I have a problem with my laptop, with my USB ports.

    A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

    They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

    I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

    You have an idea, what could happen? Or if there is no possibility to fix without service visit?
    I would appreciate your help.

    Hello

    Have you tested these ports USB plug a USB mouse or a USB keyboard?
    These devices work properly?

    I don t think you need a visit to the service.
    I think that it s just a software problem
    Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

    The alternative is a bit drastic, I think about the recovery of the laptop...
    It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

    I remember that my USB ports do not work after installing iTunes.
    I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

  • Satellite C660-1PH - problem with Chicony USB 2.0 camera

    Hello.

    I recently purchased satellite C660-1PH and I have a problem with my webcam. When I use Skype the image of me is blurred.

    Any ideas? I looked fot the webcam settings and these are all the default ones.
    What do I have to uninstall and reinstall the drivers from scratch?
    Lia

    Hello

    * @ economid *.
    How did solve you this?

    In my case, the protective film has been mounted on the front of the cam.
    I removed it and the photo quality was much better.

  • Satellite L670-1HD - problem with audio interfaces USB 1.1

    Hello

    I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
    When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
    You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

    I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

    Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

    Thanks in advance for the help!

    See you soon,.

    Stefan

    Hello Stefan

    In my view, you see the problem from the wrong point of view.
    Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

    You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
    Something like that is definitely not possible.

    In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
    They should know how the device should work on new laptops with USB 2.0.

    It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

  • Satellite P300D - 12L - problem of microphone with Yahoo messenger and Skype

    Hi again!

    I use Windows Vista 64 SP2 and I have a problem with the microphone, if I use Yahoo messenger, Skype.
    If I want someone to talk to, no one can hear me, or I don't hear from him. There is no difference whether I use Internet or wireless cable. I get the message "wifi weak signal" or something.
    I have to mention the fact that, among all attempts made so far once worked, but just once. Im going to crazy. Can someone help me please?

    Thanks in advance

    Microphone internal generally on Toshiba laptops work correctly with different messengers, especially with Skype.
    I checked on several laptops and did not notice a single problem.

    So I guess there must be a problem with the audio settings.
    Did you install own OS or the Toshiba Recovery for 64-bit image?
    Audio driver is installed correctly?
    Have you tested with headphones?

  • WinXP Conexant Sound/Modem satellite P300D driver problem

    Hello

    I have a strange problem with my Installation of XP. I had to reinstall XP two days ago because there no periodically starts.

    In any case on my new install, I can't install THE Conexant drivers, who would be the modem and audio driver. I need the modem, so this isn't the important point, but the sound is annoying. I've been trying several drivers I found on the internet but none work, they all complain to the facility, there is that no devices found which would correspond to the driver.

    The strange thing is that I was able to install these drivers, when I installed XP about 3 weeks ago... I have no idea what the problem is now.
    Both devices are displayed as "PCI Device" in Device Manager. What is interesting is that the Instance ID of the devices device do NOT correspond with those who are in the files of the driver... maybe a problem with the chipset drivers, who pack things?

    Any advice?
    Thanks in advance :)

    Satellite P300D-13N PSPDCE

    Have you installed the chipset drivers?

    Are all the other devices in device not installed Manager?

    Have you downloaded the correct driver for the P300D, not the P300?

Maybe you are looking for