Problem with USB HUB using Windows 7 on Bootcamp
I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.
I suggest you to see link and check.
Tips for solving common driver problems
I also suggest you to contact the apple support and check.
I have a Palm Zire 21 that I use with ACT! Contact Manager to keep track of my appointments. I was able to sync the Palm with my ACT database until this week. The device appears on the list of USB devices, but does not connect to Windows XP mode.
I used this device in XP Mode since August without any problem. Last week, I started having problems with the integration of XP features and had to uninstall and reinstall the integration features a few times. I think I have a corrupted somewhere driver.
Any help would be appreciated.
No need to comment unless you have more insight.
I solved the problem myself. In XP mode, I went to the Device Manager and scroll down to USB controllers. A virtualization USB bus drivers showed a problem. I uninstalled this device and then managed to reinstall my Palm correctly after connecting it to the USB port, and then going back to the menu at the top of the XP USB mode screen and hit connect when I saw my camera. The device connected in XP automatically and I was off to the races.
I use winsows 8 in hp probook 4440 s with processor i3. Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?
Check with HP Support, their drivers and documentation online and ask in their forums
on known problems. The drivers are from HP. update the BIOS, chipset and the major
device drivers embedded and separate that may affect the USB.
HP support/troubleshooting & drivers
Update driver and troubleshooting details (don't forget to check for BIOS, chipset,
(and other drivers):
Microsoft - hardware and drivers
Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
What happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
the BIOS, chipset of low level driversand the major device on-board and separate
drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
without drain to their name.
-Free - DriverView utility displays the list of all device drivers currently loaded on your
System. For each driver in the list, additional useful information is displayed: load address
of the driver, description, version, product name, company that created the driver, and
To check system drivers manufacturer as replacements and camera manufacturer who are most
current. Control Panel - device - Display Adapter Manager - note the brand and
fill out the template tab of the driver for your card video - double-click - write down the
the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
3rd party with their own software and drivers and the other main device drivers you
Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
(Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
After each installation.
Always check in the Device Manager - drivers tab to be sure the version you install
actually arises. This is because some restore drivers before the most recent is installed
(particularly that audio drivers) so install a driver - reboot - check is to be sure
installed and repeat if necessary.
Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
I use Windows to import images from my camera (Canon Rebel EOS) to the computer (HP) and display them in the Windows Photo Gallery. Recently, the photos in the Gallery become corrupt once downloaded, which means they download fine then when I open "Images" to see in the Gallery, they photos each are corrupted with ribbons of various colors, or the image is cut into strips to compensate. It didn't happen when I uploaded the same photo files to another computer so I know that is not the fault of the camera or individual files. I scanned for a virus (I use AVAST). Can I fix this, or is there any other software I should use to download files? I'm just a MOM ol ' ordinary looking to transfer the zillions of photos that I take my children. Help!
Welcome to the Microsoft Answers community.
Try to rebuild the database of photo gallery that should remove corrupted files that could cause this problem. Do follow the steps mentioned below.
Photo of C:\Users\[username]\AppData\Local\Microsoft\Windows
Rename the file Pictures.Pd4 to Pcitures.Pd4.old
Retstart the photogallery program check what is happening.
Run a Virus scan using a live care online utility.
Follow the steps mentioned in the link below
How to get rid of malware.
Let us know if this helps
I bought a DeskJet 6600 of Wal-Mart about 3 months ago and all is well for the first few months. After three months he left the impression. Fortunately, I have about 2 days of WalMart policy on electronic return policy which is 90 days.
I had an another 6600 because I had to stay with the original purchase because of their policy.
I got the home printer and set it up, and this one don't print all too! A BIG disappointment... (I don't use the USB cable on first installation option)
I have checked that everything is possible... and also windows are that he and the HP software did too. The problem is the shows with the doctor of the utility was that it had connection problems. I'm trying to go wireless with 2 computers and computers appears, there are connection problems.
Can someone please help me with this soon, because I bought this for my wife for Christmas and I want it to work before the entrance of this special day. This suxs really because it's happened twice in less than 6 months of ownership.
I inserted a print screen for your convenience, and perhaps this will help solve this problem!
Thank you and I hope to hear from anyone... SOON! :-)
Thanks for the information, but after downloading the firmware, I tried to install it, but it will not
install due to no communication.
On the other hand, I don't understand what you're trying to say or what to do!
Thanks for all the time and the patience that you have to help me with this.
Why is it that whenever I have try and install a game that requires win95-for win 2000 it does not everything with my windows vista it also I cannot download from disc info for my printer and it's the same question is what can I do to solve this problem
What games are you trying to install? It is a good chance that it uses a 16-bit installation program that will ask you to find the setup.exe and run it as administrator to install correctly. I have a simple philosophy: just assume everyone is a piece of c.r.a.p. and then be pleasantly surprised if you find someone who is not.
hope someone can help here... I am running vista ultimate 32 bit, I have a VIA USB 3.0 4 port internal pluged into my PCI-e slot card now under win 7 cards worked very well decided to have a play around with vista for a while and I can't do work I'm running the updated driver of VIA that is ver 4.50 a install is fine but after reboot is the place where the trouble begains, vista takes the new hardware and install card say that the material is ready for use to check to see if it has installed the HDD attached to one of the ports on the card no luck so if you access the USB controller in the Device Manager there is a yellow tri angle againt the hub USB 3.0 under properties of card error is code 10 this device cannot start , I am a very exprence IT person but it has beat me
What I've done
1 reinstalled and uninstalled the driver several times
2 tried manually the drivers of instllaing using the INF files
3. hard connected to a different Port on the map
Hope someone can give me a solution
Please contact the Microsoft Community.
I wish that you run these FixIt. Let us know if they help.
Let us know if it works for you.
Since I upgraded to El Capitan I have several, serious problems with USB devices:
1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.
2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.
The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.
It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?
I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work
Thank you for using communities of Apple Support.
Whatever the USB that I connect to my desktop PC Windows 7 continualy disconnects readers. I tested many drives, but when tested on my laptop using Windows 7 Ultimate 64 bit all these exact same drives work perfectly.
My office is using and Intel Core 2 Quad Q6600 2.4 GHz with 3 GB of memory.
I've read this complaint anywhere on the Internet and I tried several fixes with no positive results. All the drivers are up to date. I uninstalled and reinstalled until I'm blue in the face.
What I read during my research, it seems that this is a common problem that 64-bit users are complaining a lot, but that's obviously a problem with the 32-bit version of Windows 7 as well. Many tech Internet sites also claim that it is ONLY a problem on the desktop and not on laptops, which I guess I confirmed in my tests.
Everyone does experience, and if anyone has found a fix?
See the following articles with some good information and troubleshooting:
I hope this helps!
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
I've been having some problems with the 5.0.1 and Windows 8 and wanted to see if anyone knew these.
1 aero glass does not work correctly. I originally had problems with Office 2013 and which was fixed by disabling hardware acceleration for office only
2. problems with USB currencies when 3 USB is enabled. The custom of the machine is taken out of service and the machine locks up frequently. As a solution, I changed the virtual computer to use only USB 2.0
Aero has not been removed in the RTM and retail of Windows 8? I thought it was.
After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
If anyone idea about this problem?
PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
I m hoping someone out there can help with this problem.
If I understand you well you don't have problem with USB port, but with a single USB device. Right?
I ve you have a problem with my laptop.
I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
Can someone help me?
Maybe I can use drivers from another laptop A200 series, but which?
a good explanation how to install XP on a SATA machine can be found here:
Welcome and good luck
I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer.
so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?
Hi dude, on average
A. from when what happens?
B. recent changes made on your computer?
C. you get any error message?
First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.
Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.
Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
Type the following command and press ENTER: sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Hello. I've had my computer for over a year now, and since about a week after I got it I had several problems with it. Initially, I had problems with usb devices works sometimes not. In this case I have to restart several times hoping to rework them. Over time, that has become less of a problem, but still exists. Then when I play games on my pc as the League of legends and world of warcraft games themselves would break several times. I also had problems with different programs crashing like Skype, google chrome and also blocks flash in chrome. Soon enough my whole system was crashing with BSOD messages or sometimes would be only to randomly restart or freeze.
Here is a list of the different BSOD:
irql not less or equal, page fault in nonpaged area, kmode exception not handled, pool header corruption of infrastructure critical bad memory management
Unexpected kernel mode trap and driver irql not less or equivalent. With several different drivers be blamed.
Now its to the point where I'll watch a live stream on twitch.tv or a video on youtube and it will crash after a few minutes. It happens more often in these situations, or in game, but it can also happen randomly even if soon as just start or idle.
I tried many different things to update many pilots to replace my ram and hard drive as well as full reinstalls of windows and system different restore points. I wanted to ask you on this forum about it to see if it has what I can do to solve this problem before I send in for repair because I prefer not to be without him for an extended period of time.
Thank you for hearing me.These accidents were related to the corruption of memory (probably caused by a driver).
Please run these tests to check your memory and find which driver is causing the problem.
If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
Since then, it is more likely to be a pilot run everything first.1-Driver Verifier (for full instructions, see our wiki here)
2-Memtest. (You can learn more about running memtest here)
Co-written by JMH3143
You have an older driver that needs to be updated. Associated with MBfilt64.sys Audio driver of Creative Technology Ltd.
You must also upgrade to win 8.1 at least.
I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)
Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.
Maybe you are looking for
Hello I have an A300 (PSAGDA-01D00R), which I am issues with sound. When I first received it, he had Vista business and the sound wasn't working, so I installed XP but sound still does not work. I then decided on installing Windows 7 and still can't
Hello during the operation of a USB - HDD and mp3 player on my Tecra 9100, abruptly stopped, power to the WLAN-, Sound-, Bluetooth, SD - Card.For example: no sound microphone, WLAN switch does not work, reports of Bluetooth: no power supply. On this
Make the recovery of my computer I lost the HID Driver and now cannot use the USB port, can I do to install
lost my icons how I get back them? Original title: network Ethernet NIC network adapter wireless network device
I am trying to install Windows 2003 on a poweredge 860 opportunity that I recently bought. I'm new on this and do and learn at the same time. The Unit came without HARD and CD disk drive. I installed everything and configure RAID 1. I modified the in