Problems with USB drivers

Similar Questions

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• HP Pavilion dv6 3110ez: problem with video drivers

  Best regards to all,
  Can someone post a links to drivers for these graphics cards with switchable?
  I tried different drivers, and it does not work on Windows 8 Pro x 64
  and Windows 8.1 Pro x 64.

  The laptop is HP Pavilion Dv6 3110ez.

  Manufacturer: Hewlett-Packard
  Model: HP Pavilion dv6 Notebook PC
  BIOS: Default system BIOS

  Processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
  Memory: RAM 6144MB

  **********************************************************
  It's the code of the ATI Mobility Radeon HD 5000 Series:
  ------------------------------------------------------
  Hardware ID:
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C & REV_00
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C
  PCI\VEN_1002 & DEV_68E0 & CC_030000
  PCI\VEN_1002 & DEV_68E0 & CC_0300

  Compatible IDs:
  PCI\VEN_1002 & DEV_68E0 & REV_00
  PCI\VEN_1002 & DEV_68E0
  PCI\VEN_1002 & CC_030000
  PCI\VEN_1002 & CC_0300
  PCI\VEN_1002
  PCI\CC_030000
  PCI\CC_0300
  **********************************************************
  **********************************************************
  It's the code of the integrated graphics card (Intel):
  --------------------------------------------------
  Hardware ID:
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C & REV_02
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C
  PCI\VEN_8086 & DEV_0046 & CC_030000
  PCI\VEN_8086 & DEV_0046 & CC_0300

  Compatible IDs:
  PCI\VEN_8086 & DEV_0046 & REV_02
  PCI\VEN_8086 & DEV_0046
  PCI VEN_8086 & CC_030000
  PCI\VEN_8086 & CC_0300
  PCI\VEN_8086
  PCI\CC_030000
  PCI\CC_0300

  **********************************************************
  **********************************************************

  I solved this problem with the drivers of AMD.  As there'are the drivers of this model of graphics card just for Windows 7 and not later versions of Windows, I just installed this driver in compatibility mode. All drivers for Windows 7 can be downloaded by following this link. Concerning

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Laptop G62-a50EV: problem with GPU drivers! :/

  Hey guys,.

  I currently installed windows 8.1 x 64 OS on a laptop OS from windows 7 to the previous address. Problem is that none of my cards (AMD/ATI Radeon HD5470 & Intel HD graphics card) are properly recognized by the system. Whenever I try to install AMD external links and no HP drivers, nothing happens... It goes the same for Intel drivers. Whenever I have install the drivers from the HP official site... AMD catalyst center works but gpu itself does not react as stays in 1024 x 768 and League of Legends game drops to 4 frames per second (I use it asa pointer of the problem). As for when I try to install the driver of HP Intel... then I get the black screen on reboot blue screen that prompts me to either reboot the machine again or try to fix the problem as a user advanced... I hope I did a system restore point that I knew that this can happen! Any suggestions?

  P.S tried 4 times still the same result with driver intel. In regards to the AMD hope is lost... I even do not have a valid driver not always by AMD for the current gpu...

  Hi there @Johnianos

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with video drivers after installing Windows 8.1 on your laptop. I'm happy to help you with this. After doing some research, it seems that the Windows 8.1 is not an operating system that is supported for this laptop. Custom HP drivers are only available for the Windows 7 operating system.

  Please see what follows, for some guidance.  Products HP - what happens if I do not see my operating system?

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• HP 255 g4: problem with USB and SM Bus controller

  I have a problem with the (USB) Universal Serial Bus controller and SM Bus controller.
  System identifies them.

  
  I installed all the drivers for my noutbook of this site, but it does not work...
  Please, help me!

  I believe that these devices are based on the AMD chipset driver package... USB 3.0 and SMBus Controller:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%2010%20-%2064

  Top package. @Paul_Tikkanen will know for sure.

• Problems with USB pnp devices series Tecra

  Hello
  I have a lot of problems to install usb flash drives as pnp devices. It should install automatically as it did on my desktop and other mobile colleagues.

  I am running xp professional and all that happens is the found new hardware wizard appears, and fails to install. I tried to update the BIOS and Chipset with downloads from this site but nothing works. I ran the diagnostics and the usb drivers and features are ok.

  Any help would be appreciated.

  Hello

  Everything you wrote is really mysterious. It will be interesting to know what model Tecra you have exactly, and this occurs when you install the operating system using recovery DVDs delivered.

  I can't really imagine that this issue occurred all of a sudden.

• Satellite L870: Problem with USB to serial interface with FTDI chipset

  Hi all

  bought a L870 year last to run software amateur radio via USB to the serial interface.
  Interface uses the FTDI chipset.

  The problem I have is that the switch on the led on the interface flashes green to red several times to indicate that it works, but then must remain on green but task on every minute she goes through the same process again.

  All the controls on the drivers and the Manager of devices indicates that everything is ok. No problem with interface on computers laptops happens or advent.

  Is there anything on the Toshiba laurys usb ports every minute.

  Thanking you in advance for any ideas

  First of all, I must say that there are different models of L870 Satellite on the market supporting different hardware and software. Some are preinstalled with 8 and some Win with Win 7.

  In addition the L870 supports USB 2.0 and USB 3.0 standard.
  If you recommend to check the different USB ports and check if your software works correctly with the USB 3.0 standard.

• Problems with installing drivers

  I have the Bluetake BT007EX bluetooth usb adapter. Pilots who placed on CD is "Toshiba Blutake Stack. I try to upgrade to a newer version in http://aps.toshiba-tro.de/bluetooth/directlink.php?snr=2 version 4.00.36. After the message "Insert the Bluetooth device and click OK" nothing happenes and I wait 10 minutes...
  Device Instance Id VID_0A12 & PID001 and I can not find in the folder with the new drivers inf file containing this Instance ID of device.
  Help me please.

  Usually, if you have no product problem with Toshiba, you check the support page because they have enough experience with own products. In any case, install the USB first and if you are sure that the device is listed in Device Manager and State indicates that this unit can be used, install the BT stack. My friends has produced similar Belkin and it configured on Satellite M40 on this path.

  Have you activated the BT device before installing?

• Problem with USB mouse on satellite a215-s7416

  Hi all. I have had this problem since I got this computer in December. I hope someone can help me.

  I've been using an optical mouse wired usb. It works for about 4-5 weeks then it loses power. For the first days I can unplug and plug again and it works again. If I change the ports that it works as well. Finally, it stops completely, in all ports. I have plug into my office and it works fine. The first time it happened that I exchanged the mouse thinking it was defective. As soon as I plugged the new mouse it worked fine. After a few months ago, I switched to another brand of mouse. I still have the same problems. I found some info on removing USB hubs and support resettlement, which worked for a few days. I've also updated the BIOS, I did not well other updates.

  Anyone know what can be the cause of this? I'm going to exchange it again tomorrow and I am confident when I plug it in it will work fine.

  I saw a similar problem on a desktop PC, it was caused by bad drivers of USB.

  Have you installed drivers mouse Logitech or Microsoft, or any other associated USB drivers?

  Try to remove those, whether they are in conflict with the mouse.

  If this does not work, you can try to reinstall Windows by running the recovery (backup your data first of course: p)

• Problems with USB 3.0

  Hello people!

  I'm here with a need for help to solve a problem that I recently got after reinstalling my windows 7.

  The problem is with USB 3.0 driver, which does not react to any device I plug on two of the ports, and they are not dead I checked that. I tried to re - install USB 3.0 drivers as well and downloaded from HP site for my model, the latest version has failed so I tried with the other older and did not work as well. Only my two USB 2.0 ports work.

  I don't know if there are any other versions or drivers that I could use, those for my model don't work for some reason, and this is the first time I did re-installation of windows for that.

  I would be very grateful if someone could help me solve this problem!

  The laptop model is HP Pavilion dv7 - 6113cl

  Kind regards

  Ed1Ross

  Hello

  Uninstall all the existing USB drivers and then try to install the drivers from this link:

  AMD Chipset drivers

  Restart and check.

• Problems with USB devices in Windows XP Mode on Windows 7 Pro

  I have a Palm Zire 21 that I use with ACT! Contact Manager to keep track of my appointments.  I was able to sync the Palm with my ACT database until this week. The device appears on the list of USB devices, but does not connect to Windows XP mode.

  I used this device in XP Mode since August without any problem.  Last week, I started having problems with the integration of XP features and had to uninstall and reinstall the integration features a few times.  I think I have a corrupted somewhere driver.

  Any help would be appreciated.

  No need to comment unless you have more insight.

  I solved the problem myself.  In XP mode, I went to the Device Manager and scroll down to USB controllers.  A virtualization USB bus drivers showed a problem.   I uninstalled this device and then managed to reinstall my Palm correctly after connecting it to the USB port, and then going back to the menu at the top of the XP USB mode screen and hit connect when I saw my camera.  The device connected in XP automatically and I was off to the races.

• Problem with USB 2.0 Driver

  I'm having a problem with the USB 2.0 driver. Whenever I connect my USB drive, I get a notification of an unknown device and I also used the troubleshooter to solve problems, but he said-

  An unexpected error has occurred. The Troubleshooting Wizard can not continue.

  Identifier of the package: DeviceCenterDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: Chinmaya-PC\Chinmaya

  Background: high

  Every time that I find this error code while troubleshooting the USB 2.0 driver. I even tried reinstalling the driver, but it's the same thing over and over again. I also tried to install Microsoft Fix it, but it won't install, it says "Microsoft Automated Troubleshooting Services BootStrapp has stopped working". Someone at - it this same error? I can't even connect a USB on my computer because of this error.

  If anyone has an answer, I would be very happy to know.

  Hello Chinmaya,

  Thank you for the update on the issue.

  Before any change in the registry, I highly recommend you back up the registry. You can see How to backup and restore the registry in Windows as described in the previous answer.

  UpperFilters and the LowerFilters are assigned values in registry keys. Upper filter drivers go between the operating system and the principal driver, and the lower filter drivers between the driver and the hardware.

  You can try the suggestion and let us know the result, we will be happy to help you.

  Thank you.

• Problem with USB on the computer.

  Hi, I'm not very good with computers at all. I have a HP pavilion which all works fine until the other day, now it may just be a coincidence but I plugged my iPhone for the first time and since then none of my USB devices are appearing when I plug them in. his making the noise, but its all just not appearing on my Explorer of files of any suggestion?

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Also check with iPhone Support as there may be a problem with this phone.

  iPhone Support and community
  http://www.Apple.com/support/iPhone/

  ====================================================

  Troubleshooting you can try:

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8/8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are identical (and
  Windows 8/8.1)
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ------------------------------------------------------------------------------------------------

  Install USB 3.0 and other USB devices
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

  Hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Set up your PC - configure your devices
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ===================================================

  If necessary:

  Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">