Problems with XP upgrade

Similar Questions

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Problem with the upgrade to version 37.0.1 - update just "hangs".

  I am currently in Firefox 36.0.4 on a Windows 7 Pro computer. I tried twice to move to Firefox 37.0.1 WITHOUT success. Once the software is downloaded and start the upgrade, the upgrade appears just "hang" - nothing happens after 15 minutes, which is much too long to do the upgrade previous updates of Firefox have NEVER took this long and I never had any problem with prerequisites updated to Firefox! My Windows 7 has the latest Microsoft patches. I don't know why this is happening. Any suggestions? For now I give up trying to pass to the 37.0.1 version.

  He just go to www.getfirefox.com, download the new version and install it. All your data will be saved, but you will be running the most recent version.

• ProBook 650 1: Problems with W10 upgrade - Client VPN in my notebook?

  Hello

  I upgraded my laptop to Windows 10 but, like many people, I encountered some problems with the Broadcom 802.11 wi - fi adapter. I read a lot of discussion about it and I decide to yestarday to roll back to Windows 7 in order to do a clean update by ISO and unisntall VPN. I read that Cisco VPN Client is the problem when upgrading to W10... but I'm not sure I have the Cisco Client in my notebook.
  You help me find a software which VPN I have in my book?
  I run Microsoft Fixit and found out that I have:
  Cisco PEAP
  Cisco LEAP
  Cisco EAP-FAST

  Is this software VPN? Or not?

  After having updated Broadcom driver on Windows 10 WiFi worked well, but I still had an error message ' Broadcom 802.11 network adapter wi - fi doesn't work "whenever I turned on the laptop.
  In addition, it was impossible on W10 to open the Broadcom Wireless Tool (Control Panel) software, I always get an error message.

  Should I unistall Cisco software?

  See you soon,.

  Marco

  "Hi @Kreiskybill,

  I'm sorry that was meant to be an internal memo that I'm not trained on commercial products and I was hoping one of my colleagues would help, but I'll try my best to help you.

  For your wireless problem, there are several troubleshooting documents available on the page of product support for your ProBook (http://ow.ly/ADK7301hCLl), that might be useful.  Also, here is the 'HP PC' document - troubleshooting wireless network and the Internet (Windows 10) consumer ( http://ow.ly/pIm0301hEIN ) for reference.

  With regard to programs of Cisco that you listed, @SpiritX on the Microsoft Forums ( http://ow.ly/DAhQ301hCFt ) well answer your question about Cisco programs you listed.  I know that you are not running Windows Vista, but the answer is always valid for you.

  If it helps and you want to thank me, please click the 'Thumbs Up' icon to say thank you.  If you think that I helped to solve your problem, please click the button of "acceptable Solution".  This will allow other users to find what worked for you. »

• M1000e with M610 Blade. iDRAC6 problems with the upgrade of the firmware 3.50 (Build 4) - "image downloaded missed the check" error

  I have the blade that is a M610. its current 3.30 iDRAC6 Firmware version (Build 17), his version of BIOS is 6.0.7. I am trying to upgrade the firmware to 3.50 iDRAC (Build 4). I am upradging by the MCC on the M1000e chassis. I choose the slot of in that the blade is and then start the IDRAC GUI. I choose firmware update and select the firming.imc file that I used successfully on some other M610 blades. After about 30 seconds, he returned with the following error.

  The uploaded image has no verification

  Why?

  I came across the same problem (with a refurb M610, iDRAC firmware has been 2.20).

  I tried to upgrade the iDRAC6 firmware to 3.60 via the web interface of iDRAC6 and it was a no go.

  I tried several browsers (chrome and firefox) and same problem each time.
  I tried to go to firmware (as shown in the accompanying note) 2.31 instead of 3.60 and same question every time.

  I finally managed to update the firmware of the iDRAC6 by upgrading the web interface M1000e and not in the iDRAC6 web interface.

  It worked the first time (using Chrome).

• BlackBerry Smartphones Blackberry 9300 Curve 3g - problem with the upgrade of the OS

  Hi all... I have a problem with this phone...

  This summer, I bought two Blackberry 9300 Curve from the United Kingdom. First phone of "O2", following a network of '3 '. First one is locked to the O2 network and I can't use it with another sim card.  OK I'll try OS upgrade. Everything is good, now I have OS 6.0.0.380, when I'll try uprade '3' network BB I have problem. I can't upgrade, I know not why, me, my BB from '3' network have no updates, but my next BB 'O2' network have write...

  WTF is this? Anyone know?

  Sorry for my bad English...

  Respectfully, Ridas.

  F16 wrote:

  WTF is this? Anyone know?

  Please do not use foul language.

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below. Apparently '3' is not from the same upgrade as O2.

  See the link below to download and follow the simple installation instructions to install 6.0.0.668 in your 9300 OS.

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=D840CC5D906C3E9C84374C8919D2...

  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  Note: Some users may be concerned they will void their warranty of device by loading an OS from another carrier. There is really nothing to fear. Please read more information about it here: http://www.port3101.org/power-users/296-blackberry-os-upgrade-including-betas-myths-dispelled.html

• BlackBerry Smartphones BB8320 Internet problem with the upgrade to version 4.5

  I installed the software for my bb8320 with wifi.  Everything seemed to be going well with the upgrade.  Now I try to use my wifi and connect to the wireless router is fine.  When I try to connect to the internet, it gives me a problem.  It said unable to connect to the internet...

  I did have a problem with my wifi connection before the upgrade.  My bb does not plan for the data.

  If anyone has this problem and know how to solve this problem, please help me.

  Thank you

  You are trying to connect to one or more Web sites.

  in the BB browser, enter in this

  Mobile. BlackBerry.com

  What is going on?

• Problem with Windows7 upgrade - Satellite A500

  I bought a portable Satellite A500 with Vista 32 bit Home Premium.
  It came with an upgrade to Windows 7, which I completed the process of installation/uninstallation of upgrade Vista Home Premium 32 bit for Windows 7 32 bit on the Toshiba site, before the beginning of the DVD of windows 7 installation process.

  After restarting my computer in step 6, I have a message "new hardware found - base system device" I tried to search c: and I tried the Windows 7 DVD for the specific file searching and can't locate it.

  The installation/uninstallation deleted the drivers to connect to the internet.

  Can't seem to start installing Windows 7 from the DVD.

  Help, please.

  Hello

  Windows 7 ask the driver!
  It s not installed on the C or the DVD of Win 7.

  I assume that you have improved the Vista to Win 7 and installed not cleaning.
  I recommend a clean installation, because Windows 7 would reinstall and will not use the applications that were pre-installed on Vista.
  In many cases these apps are not entirely compatible with Win 7.

  After the clean install of Windows 7, you could install Windows 7 drivers you will find on the pages of Toshiba.

  But Win 7 drivers are not published on Toshiba page European right now
  If you could use a Toshiba page us to get drivers or should check the European page later

• Problem with livemail, upgrade Windows 7 to 10 and back again

  Separated from this thread.

  Hello

  Having problem with livemail, improved Windiws 7 to 10 and then uninstalled immediately revert to the original with option to the program (things not working not properly).   All rolled back does OK no message or data errors.

  Now all the direct mail has duplicated, will remove some, but others won't.

  Can you post help or solution, please

  John

  It seems that many of those who go back to Windows 7 from Windows 10 experience a corruption of the store folder (the folder where messages, calendars and the account settings are stored). According to your storage folder is how complex (several accounts, calendars a lot, a lot of messages number of files), it can be simpler to just create a new storage folder and fills again:

  1. Looking at your list of messages in Windows Live Mail, press Ctrl-Shift-O for Options. On the Advanced tab, click Maintenance and then store the file. Copy the path to locate the storage folder.
  2. Close Windows Live Mail and wait a few minutes (the program will continue to run in the background, while he does his household).
  3. Press the Windows key + E to open an Explorer window, and then paste or type the path that you copied to the (1) in the address bar and press ENTER. This should open your storage folder.
  4. Right-click on the name of the folder in the navigation pane, and select Rename. Call the Live Mail Backup.
  5. A repair must check that all the program files are present and correct and properly registered, as appropriate. To do this, close all running programs, and then press Windows key + R, type wlarp and press ENTER. In the window that opens, select repair all Windows Essentials programs:

     
     When it is finished, restart the computer.

  6. Start Windows Live Mail and wait the program installs before doing anything. Press Ctrl-Shift-T to start the add your Assistant e-mail accounts and follow the prompts to add your e-mail accounts.
  7. Click once on the work online on the status bar and deconnecter disconnect Internet to avoid interference email downloads, and then use the file > import messages (I Alt - F) and point the wizard to the Live Mail Backup folder level. Do not intervene while the import happens.
  8. Leave the program alone for a while (an hour or two, or even a night or more) to enable him to reindex all your messages, then close and wait half an hour for the program to do his household.
  9. Relaunch the program and look at your messages under folder imported into storage folders. Take it slow, drag files out of any folder and drop in the location you want. Again, give the program time to re - indexing messages in their new location.

  Note that you can not drag files out of storage files. If you want to forward messages to a high plu account folder in the folders pane, you need to select messages to transfer, and then use the right click > move or copy folder. The controls are also available as buttons in the folders of the Ribbon tab.

• Problem with the upgrade to Flex 3

  I've recently updated for Flex 3 and an app I wrote with the beta 3 version, which worked very well does not work with the release candidate version. Most of the stuff has been cosmetic which I expected but a major problem is that the TileList info is not displayed.
  
  Code
  
  < mx:HTTPService id = "tempXML" resultFormat = "e4x" result = "onResult (event)" url =" http://rbdev.mysite.net/info_wrapper.php?url=https: / / {customer.text}.mysite.net/interface. php? action = showopen & amp; operation = showassets & amp; format = xml & amp; opstatus = crit & amp; name of user = {username.text} & amp; password = {password.text} ' / >}"
  
  < mx:TileList dataProvider = labelField "{_xlcMyListData}" = "fleet" left = "35" right = "15".
  width = "350" backgroundColor = "#000000" color = "#ff0000" fontSize = "27" borderColor = "#000000" columnWidth = rowHeight "315" = "50" themeColor = "#808080" fontWeight = "bold" allowMultipleSelection = "true" id = "TileList1" height = "0" y = "202" x = "178" / >
  
  < mx:Script >
  <! [CDATA]
  Setting the display of the TileList component
  Import mx.collections.XMLListCollection;
  
  [Bindable]
  private var _xlcMyListData:XMLListCollection;
  
  private void onResult(Event:ResultEvent):void {}
  var xmlResult:XML = XML (Event.result);
  _xlcMyListData = new XMLListCollection (xmlResult.. asset);
  }
  
  []] >
  < / mx:Script >
  
  
  As stated before the app displayed data before with flex2 and the beta of flex 3. Is there something I'm missing now?
  

  My call to the server was wrong. It wasn't a problem with flex.

• HP205 G4 Intel i35005u: problem with RAM upgrade

  Hello

  I recently acquired a HP205 G4 laptop with 4 GB of RAM installed in one of the two slots.  It has a free slot and a max RAM 8 GB capacity.  As I have a 4 GB stick lying around, I thought I would be a free upgrade of RAM and so I placed in unoccupied housing and booted up.

  My problem is that neither information system or UEFI sees the newly installed stick and States I have still 4 GB of RAM, however, Speccy see the two 4 GB sticks and indicates he has 8 GB of RAM.  It may or may not be relevant but Speccy also States that the system memory is single channel.

  The sticks are Samsung and the two DDR3.  They, however, have different bandwidth (PC3-10700 & PC3-12800) and voltage (1.35 & 1.5).  Now as I know the speed will be simply fixed by the slower stick and so both should work.  This leaves the tension, but if it was a problem, I don't expect Speccy to see the extra stick (1.5V) at all.

  So I wonder, is tension the key culprit?  Will be 1,5 volt RAM spare part - I have also a 2 GB stick - I simply does not work on this motherboard?  Is there something I missed or can I do to get the system to see what sees Speccy and thus use 8GBs?

  Cheers for any help.

  Do not use this old memory in this new laptop. If you want to run 8 gigs, get a second identical DDR3L-1600 module. Even if she would go with the DDR3-1066 RAM at this speed, do you really think 8 gigs clocked at 1066 is slightly better than running at 1600 mhz 4 gigs? I say no. There is also the question of the timing of the CPU to memory cycles cycles. You can really shake things up and cripple performance trying to use memory that runs at a different speed that the motherboard was designed to use. The motherboard is to protect themselves by refusing to see and to try to work with this alien memory.

• Problems with the upgrade to Windows Windows 7 10 and get the message 'could not be updated. "portable

  Original title: Windows 7

  I have 2 questions-

  I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated.  Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?

  I have a computer I upgraded Windows 10 and really like it.  I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10.  Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.

• Problem with the upgrade to Windows 7 Professional to Windows 7 Ultimate

  Hello

  My Dell laptop came pre-installed with Windows 7 Ultimate 64 - bit version. But there was a hardware problem, and I had to re - reinstall Windows 7 on my Dell laptop. But then, without knowing it, I installed Windows 7 Professional 64-bit (for which I had the key too) & began to work on it. Later, when some drivers were not installed correctly because of compatibility issues, I realized the truth.

  Then I tried to update my Windows 7 Professional current operating system to Windows 7 Ultimate-operating system by using Windows Anytime Upgrade without having to re - install Windows from scratch, I have so many applications and data on my laptop now. And I used the key of Windows 7 Ultimate version I have with my Dell laptop. But the key is not be accepted by the Windows Anytime Upgrade application and the following error message is displayed:

  "Enter a different upgrade key

  The upgrade key you have entered is an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. "

  Please help me in this regard to solve this problem so that I can improve my Windows 7 operating system without having to re - install from scratch.

  Thank you

  Romaric

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.

  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and system integrators or keys, this applies also to VL (Volume License), - MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  The key that came with your mobile PC is an OEM key, which most likely why it fails to upgrade.

  J W Stuart: http://www.pagestart.com

• Problem with Win7 upgrade

  I bought the x 64 ultimate update from my school to install on my standard library crashed win7, now he said I didn't have a previous version installed. Tried to do a clean install and do not let me register... What can I do? I have no recovery and discs from what I researched, I thought that it would be able to detect a previous version of Win7 on the hard drive. Advice?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us