ProBook 430 G3: USB ethernet adapter cannot be enabled.

Similar Questions

• HP ProBook 430 G3: USB recovery enough?

  Hello!

  I have a HP ProBook 430 G3 with Windows 7. I think install Ubuntu LTS 16.04 and wipe the drive completely in the process, including the recovery partition. If I for some reason any later wanting to 'factory reset' laptop / reinstall Windows 7, a USB key with recovery media will be sufficient to insert and boot from?

  My thoughts are to use "Create recovery media" in "HP Recovery Manager' to create the USB said. Is it enough to get the laptop to factory condition?

  Any help is appreciated!

  Hello:

  Yes, it's normal procedure to recover the PC when there is no recovery partition, or you replace the hard drive.

  You can also order HP recovery media if the recovery USB disk that you create does not work.

  In the USA/Canada the number to dial is: 1-800-334-5144.

  Have the serial number of the PC handy to give to the customer service rep.

  If your laptop is still under warranty, HP can send you free of charge for you recovery disks, then you can just see if you can order a set for free while you can.

• D-Link DWA - 131 Wireless N Nano USB Ethernet adapt

  Hello, is this D - Link Wireless N300 Nano adapter compatible with Windows XP 2002 as I don't seem to be able to install it. Thank you

  Try running Windows Update and click on custom and install all the updates and then reboot your PC. You may need to install additional software on the D-Link site. Visit their website for more help.

• Use of the USB to Ethernet adapter to find cRIO Systems

  Hi all

  I'm trying to connect to one OR cRIO-9066 to my laptop using USB-to-Ethernet adapter.  But I have a problem with it; Find VI systems shows no results unlike the direct connection via the ethernet port on the laptop.  I wish that the connection of the USB-to-Ethernet adapter to support this feature as well.  I would like to know if somebody did, and I hope a solution to this.

  Here's my setup. I bought the adapter USB-to-Ethernet of RadioShack. I connect the adapter to a USB port on my laptop. The adapter is the female Ethernet port on the other end. I directly connect cRIO and the adapter using a crossover ethernet cable. What is of note is that ethernet connection works.  I can specify the IP address of the cRIO then I can communicate with crio in the same configuration. However, finding systems VI cannot find any system.  LabVIEW 2015, is what I use.

  Instead of using the adapter, if I use a direct connection via the ethernet port on the laptop, find systems VI works fine.

  Any help or suggestion is appreciated.

  Thank you in advance.

  After all, my conclusion to this problem has been the model of Ethernet USB card I was using was not good.

  Gigaware USB to adapter Ethernet (from Radio Shack) was working not with find systems VI on my environment even though it is still able to connect to CRIO if I know the IP address. I even had the other, but the result was the same.  The solution for me was to use another model of the BADGE, which is NS-PU98505. It is cheaper, but has worked with find systems VI.

  I don't know what's behind the different behaviour, but the issue is resolved on my end for now.

  Thank you all for all the tips and ideas. Congratulations to all!

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Using a USB to Ethernet adapter

  I originally had my equipment plugged into an ethernet switch, and he has appeared as a network device in MAX. Finally, we will move this device between 10 different stations, so I thought it would be nicer to get 1 dongle USB-Ethernet instead of 10 ethernet switches.

  I'm on Windows 7 and got this model adapter Anker. I installed the drivers and I can't see the link in "My network connections", but I don't yet see whatever it was at the maximum I tried to disable the firewall, but that doesn't change anything. Does anyone have advice for this connection appears in MAX?

  gregoryj wrote:

  I want to connect to the network of the office through the integrated network card (which is setup on the customer site) and plug an instrument to a USB port using the USB adapter to ethernet. Previously, I connect the network and the instrument to a switch, which was connected to my computer.

  Ah... Got it, but in general the USB NIC should look like Ant to another network connection. What you're missing, it's things like a DHCP Server distributing IP addresses to tha devices are plugged into the network.

  Set a static IP address on the USB adapter in Windows use something like 192.168.100.1 and set the instrument to use a static IP address as 192.168.100.2 both use the 225.225.225.0 subnet mask.

  Chances are these days around the instrument and even the USB NIC are 'Auto MDX' then you can use a cable right throug, but if that does not work, then try a crossover cable

• HP Probook 430 G2 WiFi adapter driver problem

  Hello! It is a message to HP, correct the download pages for this model of laptop (HP probook 430 G2)! I struggled for the last day to try to download the driver for wifi card OK for this laptop that I just bought today.

  The laptop runs on windows 7 ultimate, 64-bit. I tried to contact support via chat, but my model cannot be selected. Any help is greatly appreciated...

  Thank you

  You are the very welcome.

  Yep, it happened quite often lately and the person responsible for keeping this site support better get with the program.

  You can almost set your watch by day, you can expect it to go down and for how long.

  This time he has been down quite awhile, so they have outdone themselves with this foul.

  Maybe there is a scheduled maintenance this weekend.  Here in the hope of a long-term solution!

  In any case this is the driver you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137990-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0002

  I think that this card has also a bluetooth radio, so here's the driver for it too...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-139353-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0005

• F5D5050 USB 10/100 Ethernet adapter Belkin for Windows 7

  I have windows 7 and I checked the comparability on the Microsoft Web site and it says that the F5D5050 USB 10/100 Ethernet Adapter is compatible but when I plug it in, I get an error message that the Broadcom Bluetooth 2.1 + EDR USB device has a driver problem.

  Anyone had luck to get this product to work on windows? Does anyone have an idea how to operate?

  It was the procedure to install it on Vista http://www.belkin.com/support/article/?lid=en&pid=F5D5050&aid=4404&scid=220

  It does not have Windows 7 drivers and looks like it is be misidentified.

  You can get more help on the Windows 7 forum.

• D-Link DUB-E100 high speed USB 2.0 Fast Ethernet Adapter

  I have a problem with my LAN card when I come overseas for a business meeting. I choose not to send my new phone Samsung difficulty since it is necessary for a meeting. So, I bought this adapter for temporary. It took me an hour to make it work on my Windows 7 with WinXP driver (there is no Win 7 drivers available). I found it works well if I use only for my Microsoft Outlook, but not at all for the Web site. Most of the time I try to surf, my system crash and blue screen appear. Any people have any idea what should I do? I have to be on this thing for months and I have so much to do between this computer and my office.

  Why can't you buy something that is Wondows 7 compatible? The DUB E100 is also old

  On the site of D-Link...

  «The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter specifically designed to plug into a port Universal Serial Bus (USB) available on a computer desktop or laptop PC running Microsoft Windows XP, Me, 2000, or 98SE.»

• ProBook 430 G2: Cannot dowload for Probook 430 G2 drivers

  Hello

  I try to download the drivers for my HP Probook 430 G2 in recent days, as two fingers on the trackpad scrolling does not work. However, Web sites with drivers are not available. For example, http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943803 does not work.

  Any help would be appreciated.

  Best, Marjolein

  marjoleinf

  I just tried this link to HP Web site and it works.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Cannot install Ethernet adapter integrated into my 300 S1700

  Hi guys,.

  I reinstalled my S1700-300 Satellite with W2K Pro. At the back of the laptop, it is possible to connect an ethernet cable, left for the modem, labeled plugin with "Ether". But Win2k is not able to find the ethernet adapter, do you know what to do or do you know where to find the driver of fitting for her?
  I also looked at the manual provided to Toshiba, but for this model nr. There is no information on an ethernet card, but I'm sure that on mine is a.

  Thank you
  Babsi

  Hi Babsi

  Please go to http://eu.computers.toshiba-europe.com. Under Support & downloads, you can find download drivers. Select your type of machine, OS and driver. There you can find driver LAN for W2K.

  Good bye

• This device cannot start. (Code 10) Windows 7 64 bit JMicron PCIe Gigabit Ethernet Adapter

  Apparently, I get this error at random times in the day.  My ethernet port just no longer works and I tried disabling and reactivation that used to (a while back) work.

  Then recently I was disabling and re-enabling it, it gets stuck in the 'disabled' and this error message appears when I open "Properties".  I tried to reinstall the drivers for the device with the CD of my laptop came with, but that has not worked so I looked on the site Web of Jmicron and found a newer driver who, after installing again, did not work.  I have a fixed work wireless, but not with no LAN no is a pain in the thigh.

  WIndows 7 64 bit Home Premium edition
  Sager NP 5165 Notebook
  JMicron PCI Express Gigabit Ethernet adapt

  Try to update the laptop bios and chipset software provided by your computer laptop oem (dell, hp, whoever). Fixed an instance I had 10 with a device error.

• HP probook 430 g1 with a SSD update

  Hi all.

  I'll be updating my HP Probook 430 G1 with a 512 GB SSD (in fact is 512 HDD with W7 64 professional); Web sites of many factory SSD show the compatibility of their products with my laptop, but Manual HP said that the capacity of the SSD is 128 GB. The cat with the HP support was not helpful. Can someone help me: can I put with 512 gB SDD? I put divers or chipset to AHCI storage level?

  Thank you

  The 128 GB 2.5 inch SSD was just the biggest HP offered to sell the plant. If your laptop has a 2.5-inch SATA drive (some of them operate entirely off small mSATA WSSD readers) then you can replace it with a 2.5 inch SATA SSD of any size on the market. You will not have to pay anything in the BIOS. Your best way to upgrade is to clone the existing for the SSD drive. This should be easy, because they will be very close to the same size. You will need an adapter usb to SATA, but you probably want to get an ayway to continue using the HARD original as external storage drive.

  http://www.Amazon.com/Patuoxun-converter-adapter-cable-drive/DP/B008ASF5MC/ref=sr_1_1?ie=UTF8&QID=1415724695&SR=8-1&keywords=USB+to+SATA

  I use Acronis 2014 Home Edition, but there are several other cloning there, some of them open-source (free). Windows 7 cloning on 2 hard drives of the same size is on the clone easier you will find.

  If you need assistance. Here is the Service Manual:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• drivers for HP Probook 430 g1

  Hello

  I recently bought my HP Probook 430 g1 and found no drivers for the following adapters:

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1946103C & REV_0C

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1946103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI Simple communication controller

  PCI\VEN_8086 & DEV_9C3A & SUBSYS_1946103C & REV_04

  PCI\VEN_8086 & DEV_9C3A & SUBSYS_1946103C

  PCI\VEN_8086 & DEV_9C3A & CC_078000

  PCI\VEN_8086 & DEV_9C3A & CC_0780

  (USB) universal serial bus controller

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_1946103C & REV_04

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_1946103C

  PCI\VEN_8086 & DEV_9C31 & CC_0C0330

  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  Unknown device

  ACPI\HPQ6007

  * HPQ6007

  Thank you

  Friend

  Ethernet controller

  FTP://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63213.exe

  PCI Simple communication controller

  FTP://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67047.exe

  (USB) universal serial bus controller

  FTP://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61820.exe

  Unknown device

  FTP://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64934.exe

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.