Using a USB to Ethernet adapter

Similar Questions

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Use of the USB to Ethernet adapter to find cRIO Systems

  Hi all

  I'm trying to connect to one OR cRIO-9066 to my laptop using USB-to-Ethernet adapter.  But I have a problem with it; Find VI systems shows no results unlike the direct connection via the ethernet port on the laptop.  I wish that the connection of the USB-to-Ethernet adapter to support this feature as well.  I would like to know if somebody did, and I hope a solution to this.

  Here's my setup. I bought the adapter USB-to-Ethernet of RadioShack. I connect the adapter to a USB port on my laptop. The adapter is the female Ethernet port on the other end. I directly connect cRIO and the adapter using a crossover ethernet cable. What is of note is that ethernet connection works.  I can specify the IP address of the cRIO then I can communicate with crio in the same configuration. However, finding systems VI cannot find any system.  LabVIEW 2015, is what I use.

  Instead of using the adapter, if I use a direct connection via the ethernet port on the laptop, find systems VI works fine.

  Any help or suggestion is appreciated.

  Thank you in advance.

  After all, my conclusion to this problem has been the model of Ethernet USB card I was using was not good.

  Gigaware USB to adapter Ethernet (from Radio Shack) was working not with find systems VI on my environment even though it is still able to connect to CRIO if I know the IP address. I even had the other, but the result was the same.  The solution for me was to use another model of the BADGE, which is NS-PU98505. It is cheaper, but has worked with find systems VI.

  I don't know what's behind the different behaviour, but the issue is resolved on my end for now.

  Thank you all for all the tips and ideas. Congratulations to all!

• Can I use a USB B Female adapter USB A Female in a HP Pocket Media Bay?

  Can I use a USB B Female adapter USB A Female to transform the unused HP Pocket Media Bay of a s3230uk in an area of loading of MP3?

  Surely a small load player would take less power, then a HARD drive?

  I can confirm it works and is a good way to make use of the space.

• D-Link DUB-E100 high speed USB 2.0 Fast Ethernet Adapter

  I have a problem with my LAN card when I come overseas for a business meeting. I choose not to send my new phone Samsung difficulty since it is necessary for a meeting. So, I bought this adapter for temporary. It took me an hour to make it work on my Windows 7 with WinXP driver (there is no Win 7 drivers available). I found it works well if I use only for my Microsoft Outlook, but not at all for the Web site. Most of the time I try to surf, my system crash and blue screen appear. Any people have any idea what should I do? I have to be on this thing for months and I have so much to do between this computer and my office.

  Why can't you buy something that is Wondows 7 compatible? The DUB E100 is also old

  On the site of D-Link...

  «The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter specifically designed to plug into a port Universal Serial Bus (USB) available on a computer desktop or laptop PC running Microsoft Windows XP, Me, 2000, or 98SE.»

• ProBook 430 G3: USB ethernet adapter cannot be enabled.

  Hello

  I have to connect the public network with integrated lan card and share another PC via the USB ethernet adapter.

  After installation of the USB adapter, the card is automatically disabled and it displays the error code 22 in Device Manager.

  Once I click on activate the device, it can be activated for less than 1 second, and then goes back to the people with reduced mobility.

  This condition occurs on these two chip axis and the Realtek chip.

  Are there solutions to enable the USB card successfully?

  I found the root cause that there is an application automatically disabled my NIC after the slaughter of the application, the NETWORK adapter can be enabled correctly.

• I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I don't think that you can do in XP. I think that you need x 64 XP, Vista x 64 win7 x 64 or windows server x 64. As it says here

  The only thing you can do in XP's format

• Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Hello

  It is possible in some cases - Adpater, power and the ability to read the disc
  are the issues.

  Check with the manufacturer of phone and the USB key and their forums.

  How to: use your USB with the Nexus 7 [root]
  http://www.androidcentral.com/how-use-your-USB-flash-drives-nexus-7-root

  For phones Windows ask in this forum and check the support.

  Answers - Windows phones
  http://answers.Microsoft.com/en-us/WinPhone

  For other phones check with their Support and Forums.

  Support of SanDisk and Forums (and others) would be a good source of info.

  SanDisk - Support
  http://www.SanDisk.com/SanDisk-support/

  SanDisk - Forums
  http://forums.SanDisk.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• F5D5050 USB 10/100 Ethernet adapter Belkin for Windows 7

  I have windows 7 and I checked the comparability on the Microsoft Web site and it says that the F5D5050 USB 10/100 Ethernet Adapter is compatible but when I plug it in, I get an error message that the Broadcom Bluetooth 2.1 + EDR USB device has a driver problem.

  Anyone had luck to get this product to work on windows? Does anyone have an idea how to operate?

  It was the procedure to install it on Vista http://www.belkin.com/support/article/?lid=en&pid=F5D5050&aid=4404&scid=220

  It does not have Windows 7 drivers and looks like it is be misidentified.

  You can get more help on the Windows 7 forum.

• Problems with Easy Transfer - trying to connect two computers using a USB link adapter

  I am trying to connect two computers using a USB link adapter, a computer running Windows XP under Vista, I installed the "Easy Transfer" software provided with the adapter link on the computer running XP without problem. I am able to transfer files from the computer to Vista operating, but cannot transfer the XP machine - select 'Advanced Options' to check what files can be transferred I receive the error "an error of analysis of the data on your system, windows Easy Transfer will be closed. Any ideas what I can do, any help would be greatly appreciated.

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Above is the recommended way to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• How to configure a printer LPT when adapted to use a USB Port - Windows Vista Home Premium 64-Bit

  I have a computer that does not have an LPT port, and the printer that I want to use (EPSON Stylus Color 850) is not a USB Port or Ethernet.  I bought a cable USB2LPT and attempted to get the printer to work.

  My problem seems to be the choice of the port to use.  Here are the steps I followed:

  1. pick "Add a printer" of the control panel. Printers
     2 choose 'Add a local printer' (even if using the USB Port, like when I plugged the USB cable into the computer, I received the message installing driver recognition but not familiar "bong".)
     3 selected "use an existing port.
     4 select "USB001 (virtual printer to USB Port) - it was my best estimate of the long list provided."
     5 choose the EPSON Stylus Color 850 ECP2/PCS.

  The pilot was then installed without error and tried to print a test page which is that hangs without error.

  I deleted the printer then tried to assign the LPT1 port.  No help here either.

  If someone can help me with the installation, so I can get my documents to print I would appreciate it a lot.

  Thank you

  Dave

  You do not have an LPT port.  When you select the LPT port data are always written him even if your computer does not have the hardware installed to make it work.  It would work if you have installed a parallel PCI Port card.

  USB001 would be the first choice, then USB002...

  The next step as Fouzan points out is to contact the supplier of cable or Epson for support of printer you.  Start by Epson.

  You can try other cables, parallel PCI card or another printer. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• HP laserjet 1200 using windows7, wired to the printer with a USB to parallel adapter

  HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, if the computer is connected to the printer with a USB to parallel adapter. Sometimes works very well, sometimes States printer system as ready, but do not print. Reboot hardware and upon restarting, I got a page to print. Next attempt to print updates the document in cue, but is right there - no error message. Finally, after several reboots, I managed to do print (have no idea how), but now I had to print 20 pages one page at a time. It will print no more than one page, even if I have to print the 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, or are USB to parallel unreliable maps?

  Hey renradd!

  Unfortunately, in addition to the adapters USB can be unreliable. Only a new printer, I don't know what it will provide you with a fix for this problem. You can try a different card if you have one, but if it still does not work, I would look for in a printer capable of supporting your computer.

  I hope this helps!

• USB to ethernet series

  I have a USB - series - system ethernet adapter.   The machine has an ethernet port output programmed to connect on port 514 (it has a static IP as well)

  While I have experience using usb to serial to ethernet environment (works like a regular visa on a port device corresponding com) is there a way to communicate through port 514.

  Any ideas how to approach it?  I do not yet have a device programmed, but I'm trying to prepare.

  I can't use the main ethernet of output since it must communicate over the network to work and I can't use the ethernet hub, since I did not join it on this IP range (this is done on purpose and cannot be changed)

  I would just use a second Ethernet card in your computer.  I did it with several test systems and it works fine.  You can then configure the second Ethernet port to use regardless of the settings you want.

• Best for PC to Macbook Pro Ethernet adapter to transfer files

  Hello

  I was looking for a straight answer to this question. I am a new Mac user (Woo hoo) and I need to transfer my files from a PC to my new Macbook pro. Which is the best ethernet adapter (if this is important) do so... a USB adapter or the adapter thunderbolt?

  I thought I read that love at first sight was the fastest, but then I read that I might have a question of transfer to a PC.

  Thanks in advance!

  The best ethernet adapter's ethernet cable connecting ports ethernet on both computers.

  There is no need to bother with love at first sight or USB to do this.

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?