ProBook 4430 s administrator & cdrive os questions

Similar Questions

• can I get an upgrade for hp probook 4430 gpu s

  I have a hp probook 4430 energy efficient model with intel 3000 hd is be possible to update my graphics card to one of the suppliers of gpu nvidia or amd?

  Hello:

  4430 s is only available with the Intel UMA graphics card, so there is no motherboards, that you can change to include the AMD video that is optional on the 4530 s.

  Please refer to page 7 of the quickspecs at the link below:

  http://h18004.www1.HP.com/products/QuickSpecs/13948_na/13948_na.PDF

• ProBook 4430 s: cannot activate WiFi after Windows Update HP on ProBook4430s 10

  I've recently updated my work, a HP ProBook s 4430 laptop, 10 Windows, Windows 7. Once everything was done, I went to use my laptop and found out that he would not let me turn on Wifi. The physical button is enabled, with a white light. But if I click on "WiFi" at the right bottom, he disselects himself. The same thing happen with the cursor in the network and sharing Center. I click on it, and he returns to 'off' instantly. Help? I've uninstalled and reinstalled the driver of my network, I tried the troubleshooter. And I tried to find solutions on this forum before resorting to publish my own question.

  Remedy the situation after the reset of the BIOS default settings in the F10 menu.

• ProBook 4430 s Boot problems

  Hello

  I have a HP ProBook s 4430 running Windows 7.

  A couple of weeks, I got a blue screen crashes and it seemed to corrupt a part of windows as windows (among other programs) Explorer wouldn't start automatically. I had to start explorer.exe from the Task Manager after the connection. I have searched the forums and tried all the tips/patches, but to no avail.

  I decided to simply reformat the computer and get back to the basics. This is where things went from bad to worse.

  My HP did not come with a Windows CD or a backup CD, and I have not one when I bought it (I've traveled across India at the time). All forumns advised to use HP Recovery Manager or press F11 at startup to access the partition of the hard drive recovery. (D: in my case). My computer doesn't seem to have the Recovery Manager and F11 does nothing to start. Setup does not change how he arrived at the factory, it should always be there.

  Exacerbated, I changed my D: to 'active' to try to boot from the recovery disk... this stuffed all this. Unfortunately, now my computer does not start (it is said there is no OS on D.)

  Then... of ideas? Is my only hope of order recovery disks from HP? do some work? Is it possible to change my boot from D: drive to C: without Windows help? I can't find options like that in the HP Start menu I can access.

  Any help much appreciated.

  Kind regards

  Samuel

  Hi Samuel,.

  Here's another solution, that you can use to reinstall Windows 7.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( it must be of the same exact version of Windows 7 that originally came with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you need is found from here.

  Kind regards

  DP - K

• ProBook 4430 s: unable to connect to wifi after software update, only can connect through ethernet

  Need some help here.  This is the second time something like this happened to me but the last time I could happen to someone who could help you by phone.  This time, no luck.

  My computer recently had an upgrade of the software (I think it was an Apple / itunes software update, but I remember now because I chose not to close to complete the upgrade).

  Now I can't access wifi on this computer, however my other computers in the House all the work.  If something is here.  Can anyone help?  I have Windows 7.

  Hi @TomKarl ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your question your of you Probook which is a commercial product. To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  But you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.
  
  Thank you.

• HP ProBook 6540 b: administrator BIOS password

  Hello

  I changed the BIOS password on my laptop and forgot it... It brings up a keyboard on the screen after the third attempt. It shows system lockdown after entering on the OSK. Is there a way I can get help from HP to unlock the BIOS Admin password? How much time it will give me to try again because I rebooted and entered the password 100 s of time and I have entered the good one somewhere... After the first failure, he said: "enter the password again. Does that mean that authenticaton failed or should I try to enter the password again?

  I hope you can help!

  Fred

  Hi Fred,.

  See the solution of @REO51ST on the following link.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/ProBook-6540b-BIOS-locked/m-p/5519897/highlight/true#M329314

  Kind regards

  DP - K

• ProBook 4430 s on-screen display driver for windows 7?

  Please give me the lik download 4430 s Probook fiunction keys on-screen display driver for windows 7.

  Hello

  Download and install the HP OSD driver on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• ProBook 4430 s: HP ProtectTools Security Manager

  When I use my Probook s 4430 with windows 7 (x 64), I use HP ProtectTools Security Manager. But now, I can't go with gain of 8.1 x 64. Do you have a password management software using fingerprints?

  Hello:

  See if the software of the 4440 W8.1 Security Manager s works on yours too.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229487&swItemId=ob_124362_1&swEnvOid=4158

• Missing drivers for my ProBook 4430 Windows 7 Professional

  I can't connect my Probook s 4430 to external monitor. I also have problems on the following device drivers. Are theDo I connects? need to download a new driver? What to download?

  All I want is to be able to use a larger screen.

  Port_ #0006.Hub_ #0004

  USB\VID_03F0 & PID_311D & REV_0001

  USB\VID_03F0 & PID_311D

  PCI Slot 2 (bus PCI 35, device 0, function 0)

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  PCI Slot 2 (bus PCI 35, device 0, function 3)

  PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C & REV_30

  PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C

  PCI\VEN_197B & DEV_2393 & CC_088000

  PCI\VEN_197B & DEV_2393 & CC_0880

  Port_ #0001.Hub_ #0003

  USB\VID_138A & PID_003C & REV_0086

  USB\VID_138A & PID_003C

  You are the very welcome.

  You also need the graphics driver for the PC.

  4430's can come with two types of graphics.

  Standalone Intel

  AMD/Intel switchable graphics card.

  It should be fairly easy to understand what your laptop graphics adapter specific did do you the following...

  Go to Device Manager and click to expand the category graphics cards.

  If the graphics driver is not installed, you will see a labeled device adapter VGA Standard.

  If your laptop is the Intel graphics card, you will see a VGA Standard listed adapter.

  If your laptop computer is the AMD/Intel switchable graphics, you'll see two adapters VGA Standard listed.

  Please tell me what you see here, and I'll post the correct graphics driver.

• 4430 s ProBook: probook 4430 s Bay undetected on the bios upgrade

  Hi all

  I have a problem about 4430 s probook boot configuration. I just bought an ssd drive and I want to make a double system with two disk by adding the ssd via a caddy on the portable player. The problem is that I don't see the "notebook" option upgrade Bay on the startup command option. I already activate the laptop upgrade Bay hard drive as suggested on the next page, but I still don't see the Bay of laptop computer upgrade when I Press f9 and f10 at startup. Any suggestion or information how to fix this?
  Thanks in advance for your help.

  http://Forum.NotebookReview.com/HP-business-class-notebooks/586353-HP-EliteBook-2560p-owners-lounge-...

  ERICO, exchanging, I'll be able to boot from my SSD, but I don't always get to choose which drive I want to start, right?  That's right

  If you install Linux on the disk hard inheritance after Windows 7 has already been installed on the SSD drive and use the GRUB boot loader, it should be doable.

• ProBook 4430 s Soundbar

  I use Probook s 4430, I just reinstalled my window and my sound bar is gone. Any suggestions on how to install it.

  TKS

  Hello

  Try the driver of support on the following link access key.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5045464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D0%257CswItem%253Dob_104998_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D3%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Kind regards

  DP - K

• The OSM administrator log-in question

  Hello

  
  

  I installed MSO 7.2.2 on my linux.  I am having login issues in OSM Administrator installed on my windows 8.1. I changed omscfg.xml to point to my OSM server under linux. I get error ORA - 12541:TNS:no listener. I thought administrator OSM gets connected OSM server. Why is it trying to connect to databases directly? where can I configure TNS so that I can connect in OSM administrator?

  I have already installed ODAC on windows

  I used linux 64-bit OSM media pack to install the administrator of the OSM. Do I need to use the 32 media pack?

  Thank you

  Problem is solved.

  What I did under windows is correct.

  The question is, jdbc configuration of OSM database on weblogic server, which is installed on linux. This has localhost in the url for the connection pool. I changed it an ip address. This question was raised that I installed the two weblogic and database on the same machine with the same ip address. So jdbc is configured with localhost instead of the default ip. When the administrator OSM tries through weblogic database connection, it uses localhos (windows) and no conclusion listener.

  Thank you

• Administrator user profile questions

  I use Windows Vista Home Premium.

  The user profile for the administrator account on my system is apparently damaged so I log in as an administrator.  When I try to login, I get an error message indicating that the user profile cannot be loaded.

  When I try to create a new administrator account or edit a user profile work to make an account administrator of the system seemed to accept the administrator password, but never brings up a window with the options to create or edit a user profile.

  I also watched the user in the registry profiles, it seems that the system has created temporary profiles for the user profile that is no longer working and ".bak" (I guess that means backup) is added to the original profile IDs.  Unfortunately, I can't change the registry to remove or replace the temporary profile, because I can't log in as administrator.

  I'm looking for suggestions on how to solve this type of problem.

  Try a system restore and read the news of MS:

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• The server administrator running in questions of SOA.

  Hi all

  Can someone help me.

  I recently installed Oracle SOA suite on GNU / Linux. As I ran the Server Admin, I run into some issues. Server Admin works, but everything that I'm out of memory because the newspapers. Can someone help me find the problem and fix it. I can make some other arrangements to save memory. IF you could help me with any questions, I'd be so happy. A suite SOA thing installed on the management server rather soa_server1 or soa_server2. I still need to configure SOA-infra on soa_server1 or soa_server2 (on different remote computers) [If this info helps also.]

  This problem is repeated every 5 seconds.

  < 16 July 2013 23:35:21 CEST > < error > < oracle.soa.mediator.common.listener > < BEA-000000 > < DBLocker caught exception when retrieving locked messages. Attempts at recovery after 2 seconds

  Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.6.0) (Build 111018)): oracle.toplink.exceptions.DatabaseException

  Inner exception: java.sql.SQLSyntaxErrorException: ORA-00904: "TENANT_ID": invalid identifier

  Error code: 904

  Call: SELECT CASE_ID, CONTAINER_ID, DUMMY1, msg_id(2), COMPONENT_DN, OPERATION, CREATION_DATE, PRIORITY, COMPONENT_STATUS, QNAME_LOCAL_PART, CASE_INFO, QNAME_NAMESPACE, LOCK_TIME, SOURCE_URI, TENANT_ID, INSTANCE_CREATED, IS_EVENT, STATE of MEDIATOR_DEFERRED_MESSAGE WHERE (((STATUS =?) AND (LOCK_TIME =?)) AND (CONTAINER_ID =?))

  link = > [1, 16-07-2013 17:23:12.814, A8424220EE5D11E2BF9C6D1C72885086]

  Query: ReadAllQuery (oracle.tip.mediator.common.persistence.MediatorDeferredMessage)

  at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:305)

  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:614)

  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:468)

  at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:447)

  at oracle.toplink.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:117)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:179)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:250)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.selectAllRows(DatasourceCallQueryMechanism.java:583)

  at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRowsFromTable(ExpressionQueryMechanism.java:2500)

  at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRows(ExpressionQueryMechanism.java:2458)

  at oracle.toplink.queryframework.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:467)

  at oracle.toplink.queryframework.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:874)

  at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:679)

  at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:835)

  at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:445)

  at oracle.toplink.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2265)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1079)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1063)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1037)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1009)

  at oracle.tip.mediator.dispatch.db.DBAccess.getMessageFromDB (DBAccess.java:800)

  at oracle.tip.mediator.dispatch.db.DBAccess.getDeferredMessages (DBAccess.java:821)

  at oracle.tip.mediator.dispatch.db.DeferredDBLocker.getLockedMessages (DeferredDBLocker.java:153)

  at oracle.tip.mediator.common.listener.DBLocker.getLockedMessages (DBLocker.java:173)

  at oracle.tip.mediator.common.listener.DBLocker.run (DBLocker.java:93)

  to oracle.integration.platform.blocks.executor.WorkManagerExecutor$ 1.run(WorkManagerExecutor.java:120)

  to weblogic.work.j2ee.J2EEWorkManager$ WorkWithListener.run (J2EEWorkManager.java:184)

  at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)

  Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "TENANT_ID": invalid identifier

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)

  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)

  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)

  at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)

  at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)

  at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:135)

  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeSelect(DatabaseAccessor.java:814)

  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:540)

  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:468)

  at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:447)

  at oracle.toplink.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:117)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:179)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:250)

  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.selectAllRows(DatasourceCallQueryMechanism.java:583)

  at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRowsFromTable(ExpressionQueryMechanism.java:2500)

  at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRows(ExpressionQueryMechanism.java:2458)

  at oracle.toplink.queryframework.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:467)

  at oracle.toplink.queryframework.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:874)

  at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:679)

  at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:835)

  at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:445)

  at oracle.toplink.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2265)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1079)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1063)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1037)

  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1009)

  at oracle.tip.mediator.dispatch.db.DBAccess.getMessageFromDB (DBAccess.java:800)

  at oracle.tip.mediator.dispatch.db.DBAccess.getDeferredMessages (DBAccess.java:821)

  at oracle.tip.mediator.dispatch.db.DeferredDBLocker.getLockedMessages (DeferredDBLocker.java:153)

  at oracle.tip.mediator.common.listener.DBLocker.getLockedMessages (DBLocker.java:173)

  at oracle.tip.mediator.common.listener.DBLocker.run (DBLocker.java:93)

  to oracle.integration.platform.blocks.executor.WorkManagerExecutor$ 1.run(WorkManagerExecutor.java:120)

  to weblogic.work.j2ee.J2EEWorkManager$ WorkWithListener.run (J2EEWorkManager.java:184)

  at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)

  Thanks to you all.

  Step 2 is totally wrong and will NOT work. It is the first cause. If you install just the 11.7 line, this will NOT work.

  As mentioned, you should and must install 11.7 UCR that is already there in the downloads of the site as well as the SOA 11.7. So, download this zip file and unzip it.

  Before you run the RCU 11.7, I recommend dropping all the old patterns of 11.5 to free space in database. I hope that you will use only 11.7 SOA. So rerun old RCU 11.5. Select drop and select appropriate prefix. Once everything is cleaned up, run RCU 11.7. This is a must.

  Then delete the old domain. Its corrupt. You can clean a manual update of the jdbc under folder config/jdbc data source files. But I would NOT recommend this. Just delete this folder field and of user_projects/applications also remove the folder with the same domain name.

  Create a new domain by using wizard config. Select SOA or BPM according to what you want and also Enterprise Manager. And then to the database, select carefully 11.7 schemas that you created earlier.

  Thank you

  Ravi Jegga

• ProBook 4430: Windows 7 upgrade-&gt; Windows 10 (HP ProtectTool problem)

  Hey everybody,
  
  I ran into a problem while improving my PC to 10 Windows and he said I need to uninstall HP protect tool which is also connected to 6 other products and I need to remove/uninstall all of them.
  
  What do I do and is it safe to uninstall?

  I can it download it again once I've upgraded to Windows 10 because I liked the face recognition software.

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  Yes, you must decrypt your hard drive and you must uninstall the security software as HP tools protect.

  In fact, Protect tools is old version. The most recent version of the same software is called HP Client Manager Security.

  HP Client Manager (Protect tools) Security is just 'control center' of other applications.

  You must uninstall all, finally protect tools, restart the computer.

  Then, start the computer and connecting to Windows.

  Do not attempt to remove the software, unless you are sure that you can bypass the login screen and boot on the Windows desktop.

  You must open your security HP Client Manager / protect tools.

  Authenticate with the Windows password or another option.

  - First, if it is available in your version and if you - go to drive encryption and make sure that you DISABLE disk encryption hard while the disc gets decerypted. This can take a long time (hours or more to complete).

  Reboot / restart the computer

  - Second, if available in your version and if the case on your part, go into identifying information - fingerprints of the article and delete data

  You can see how I created by these screenshots (these are for the most recent version, not to protect tools) > https://onedrive.live.com/redir?resid=73EA0FA259008E8! 107 & authkey =! AEyZq_GEDdnNQnE & ithint = file %2 c

  When you're ready, you can try to uninstall all and restart the computer eventually.

  Finally, you can upgrade to Windows 10. Here are a few tips and tricks > http://support.hp.com/us-en/document/c04730900

  I'm afraid tools protect HP and HP customer security Manager are not compatible with Windows 10, not officially.

  In view of the information >here<, officially="" supported="" are="" win="" 7="" and="" win="">

  Windows Hello is free available in Windows 10 facial recognition function > http://www.windowscentral.com/how-set-windows-hello-facial-recognition-windows-10

  Drive encryption (Bitlocker) may be also available according to the edition of your Windows.

  I would like to know if it works for you. Please, give your feedback.