ProBook 640 G1: guaranteed

Similar Questions

• ProBook 640 G1: Is it possible to install an SSD m2 in a G1 640 Probook?

  I would like to install an m2 as boot drive SSD in my Probook 640, but I can't find the crack. Does anyone have a diagram or photos to share? The only open slot I can find is on the WLAN module (I think it is used for the ADSL module in option). Decision does not seem compatible with a player m2.

  Thank you!

  G.

  UPDATE: I just installed a MyDigital 42 mm m2 SSD in this niche. After you enable the m2 option in the BIOS, the card is recognized instantly.

• Norton Security: install Windows 10 on HP probook 640 g1 with Norton security

  I bought Windows 7 Pro HP probook 640 http://www.newegg.com/ g1 and security http://www.anti-virus4u.com/ Norton can install Windows 10? I contact Norton support, the new version should support but that on my HP probook 640 g1 drivers if I install Windows 10 and Norton security? Can I download and install new drivers?

  A word of warning.  Windows 10 is a technical preview version and should not be installed on your primary work computer.  There is no official driver for it and you will have to rely on the generic drivers, that settles it.  All programs will have to be resettled, including Norton.

  The official RTM version should be stopped before the end of the year.

  Don't forget to create your recovery discs before you do anything if you want to factory restore your system or create an image backup of hard drive using Macrium reflect Freeware:

  http://www.MajorGeeks.com/files/details/macrium_reflect_free_edition.html

• HP Probook 640 G1 Radeon HD 8750 M Win 7 Pro x 64 driver failure

  (x-posted to Forums of consumer...)

  I have similar, frustrating problems with a brand new HP ProBook 640 G1 running Win7 Pro 64-bit.

  (see here for an original message RE: HP ProBook 650: https://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Probook-650-G1-Radeon-HD-8750M-Intel-HD-... )

  I did an install clean system and install the latest drivers from the HP site for this laptop.  When I installed the 8750 M AMD Radeon drivers on HP website (I tried both those of 02.17.2014 and 09.23.2013.), said the installation was successful, but when I restart the computer, the notification of Catalyst Control Center icon disappears after about 10 seconds, and when I try to access the CCC by right clicking on the desktop, I get the same error as the original message above.)

  I then did clean install from another and tried to install Microsoft .net Framework 4.0 software you suggested, before attempting to reinstall the 09.23.2013 AMD Radeon driver on the HP site.  Still no luck.  (And, incidentally, the 02.17.2014 installation package seems totally screwed to the top, because it installed the .net packages in English, Spanish and Portuguese, according to me, on my computer...)  I don't have not even tried to install the Intel video driver, because I wanted to see if the AMD driver install correctly (with the CCC) on its own.  No luck.  Same error: "cannot start AMD Catalyst Control Center.  Currently, there are some parameters that can be configured using AMD Catalyst Control Center. »

  I lost my weekend on this already.  Oh, and my brand new battery does charge more than 64%, even after a night or more and once again all the afternoon of charge today.  It's my laptop HP or Compaq 4th in 8 years, and this has been by far the worst experience I've had so far with a HP machine.  Most of the unfortunate.

  Well, isn't this interesting...

  Thus, HP tech came out today to replace the motherboard due to battery failure.  Indeed the battery in the new motherboard.  In addition, the new motherboard came with a new video card.  On a lark, I uninstalled the generic AMD drivers and tried to reinstall the version of HP from the HP Web site.  And, it worked this time, without any error AMD Catalyst Control Center!

  Thus, it seems that the motherboard buttocks was responsible for two battery problem and my AMD Radeon 8750 M driver woes.  Happy I arrived on-site service contract next business day!

• HP ProBook 640 G1: Upgraded hardware Hp ProBook 640 G1, product: K4L16UT #ABA

  Laptop Hp ProBook 640 G1, product: K4L16UT #ABA
  
  Hi, I want to know 3 things:
  
  (1) can I upgrade my hardware like processor, graphics card, etc?
  
  (2) I have 4 GB of ram in 1 memory, if I buy 8 GB wan and add in the second port I get directly 12 GB?
  
  (3) if I upgrade my ram memory, help for my graphics memory?
  
  Answer in order and for number please
  
  Thank you very much! I appreciate your help!

  Saraiva.

  1 graphics no, yes processor. "Page 32 in your manual. »

  Yes 2. memory. " Page 4 of your guide. »

  3 so it's not going to help.

  Go into your BIOS and make sure you have 512 MB active.

  

  Your manual here.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=5405392&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Dmanualslist%257Ccontentid%253DService-and-maintenance%257Clang%253Den&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  REO

• HP ProBook 640 G1: Optical drive

  I have 10 window on my laptop and I need information about the drive Bay optical and how and where to find the right drive for her.  I see the status bar, but there is no way to open it. I am unabashedly a "dummy" on this laptop, so please consider that if you have answers or suggestions. Thank you.

  @Pam512203

  Your maintenance and Service Guide here.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04823617-1.PDF

  HP ProBook 640 G1 Notebook PC - videos to remove/replace here.

  http://h20464.www2.HP.com/results.htm?SID=5405392&MEID=0BFA6527-C973-4C69-A258-97DAEA8E3E44

  REO

• HP Probook 640 G1 and VGA, strange behavior...

  Hi all!

  Recently, I received this 640 of my workplace to do some work at home.

  At home, I use monitor ViewSonic P815 Participation in (CRT), 21 ', professional series.

  I quickly fixed to the 640 notebook VGA port, turned on 640, connected to the system and noticed that the resolution is set to 1280 x 1024, while native resolution of P815 Participation in is 1600 x 1200.

  The display settings of Windows-7 REFUSED to change greater than 1280 x 1024 resolution AND change the frequency of 75 Hz.

  At 1st, I thought that any malfunction of VGA port, but when I joined Dell2007 (monitor TFT, reserve one), 1600 x 1200 went to work very nice... I moved further away, checked the settings of the Intel HD 4600 Graphics and full of very interesting information.

  4600 software clearly told me that he SEES all need P815 Participation to monitor resolution sets.

  Here is the proof:

  http://i.piccy.info/I9/1cc977d430ad5da54ae6f29433525da4/1414143537/89621/818361/intel_HD_4600_p815_s...

  And here's the diagnosis than 4600 the software of this laptop:

  http://fpaste.org/144794/41414352/

  The main question is: is it possible to use the CRT monitor as external, attached to the Probook 640 G1 VGA port and get 1600 x 1200 at 85 Hz, as P815 Participation to support by default?

  Why I ask - before I was fresh 640 Probook new I got laptop HP/Compaq 6510 b and its VGA port worked perfectly, gave me 1600 x 1200 w/o any problem...

  Thanks in advance!

  t

  Hi @nmr50,.

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Here is a link to your product to begin your search.

  Thank you.

• ProBook 640: BIOS password recovery

  I bought a used ProBook 640 last week and tried to boot from a CD. Unfortunately the BIOS requires a password which neither the seller nor I know. Please could help you with BIOS password reset?

  I can provide the serial number and UUID if necessary.

  Thank you very much

  Hello

  You will need to Contact HP Business support - they should be able to file a custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• ProBook 640 G6: windows 7 showing peppering your desktop every reboot.

  Hello

  I had a problem with my computwr started after I turned off my hp probook 640 and I connect it says perpeing your desktop then goes to the standed windows theme 7 when I got a differet a downloaded Microsoft System restored the machine and his works well I don't have what this it caused is there any fix

  Thank you

  thepyrofan222

  Hello

  You can try the following.

  Shut down the laptop.

  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.

  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 48 hours before the log - it occurs first and then do the restore.  When you are finished, Windows will restart as normal in order to check what happens when you log in.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• ProBook 640 G1: Vertical line down the left side of the screen

  I have a vertical line on the left side of my screen on my G1 640 Probook - model number is T1C08UT #ABA.

  I've seen other similar posts and the suggestion was to plug an external monitor. I did it and the line does not appear when hung outside. Someone at - it any other ideas? I used product Wizard and all my drivers also show to date. It is under warranty, should I just through HP warranty repairs? Thanks in advance.

  Yes, thank you. It was under warranty with HP, so they fixed it. It seems they replaced the raw Panel and she came back that all fixed as good as new.

• Probook 4530 s & guaranteed replacement hard drive

  Hello.

  I would like to know if the warranty is void if I replace hd with a ssd in a Probook s 4530.

  Thank you.

  Hello:

  Install a different hard disk will not void the warranty, but HP will not support the SSD under the guarantee of the laptop.

  Paul

• ProBook 640 G2: [SOLVED] cannot update Bios Probook G2 640

  I want to update the Bios of a Probook G2 640, Win 7 Pro 64.

  On the HP site, there is a download for v01.02

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8430732 & swItemId = ob_163103_1 & swEnvOid = 405...

  Downloaded the file SP74154, there ran, questioned restarted the laptop: the result I got after startup:

  "The system cannot find one of the binaries updated BIOS. Please make sure that the correct BIN file

  is located on the hard disk of the system or on a removable USB under the folder "Hewlett-Packard\BIOS\New.

  or under the folder "EFI\HP\BIOS\New". It can also be placed in the folder "Hewlett_Packard\BIOS\Previous".

  or under the folder "EFI\HP\BIOS\Previous".

  [OK]

  Even though I made records and put in .bin, executed files the file of SP74514 even once, I got the same message and the BIOS is not updated.

  Gladly would he because we have problems with the wifi does not work after that we disconnect it and bring it in a conference room.

  If anyone has a solution?

  THX!

  Ok

  Can manually create you a folder EFI\HP\BIOS\New

  on the flash drive, then paste it N87_0102.bin it

  For example E:\EFI\HP\BIOS\New\N87_0102.bin

  Then, restart, type F10 to update the BIOS and see if it will work?

  Alternatively, restart the computer, press F1 for information system to keep. Once it opens, please copy and paste all the information here, especially product number, info motherboars and ROM version or something similar - what is there...

  Forward to your response.

• To receive a replacement for notebook Probook 4530 s guarantee with the following defects?

  Hello

  Operating system: Windows 7 Home Premium 64-bit

  With about a month to guarantee rest yet, I was wondering if I could get a replacement for laptop to my HP ProBook 4530 s.

  When I got it, it's in very good condition, after almost a year of use, the optical dvd player case is sometimes a bit loose and one of the keys on the keyboard relaxes and I would have to fix it and hang it in the keyboard frequently. In addition, sometimes one or two of the USB Hubs would not read my flash drive but other ports would be strange. While this is happening in only a few flash drives and all 4 USB Hubs are still functional. Finally, sometimes my laptop keyboard may lock up randomly but my mouse pad would continue to operate, which means that I have to restart the laptop to make it work again. Even after installing the updates and even Flash my BIOS, I always have this problem from time to time during the execution of certain applications, including the computer games from Valve, but never expericened before running programs. This problem would happen frequently as well. I was wondering if all these problems would be enough to get a replacement. Thank you.

  Kind regards

  Calvin N.

  Hello

  Please contact HP as soon as POSSIBLE, should be an office very close to you in the following lists:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html

  http://WWW8.HP.com/au/en/contact-HP/contact.html

  Good luck.

• ProBook 640 G1: Hp Probook 640 G1 no fingerprint reader?

  I bought a used HP laptop... I installed Windows Home edition 8.1, and the fingerprint reader does not work. I tried driver install synaptic and the driver of the validity, but does not work. . I got the attention that perhaps tis probook does not have a Fingeprint reader? I could not find in the BIOS and nowhere... (neiher in Device Manager). Maybe I don't have a fingperprint player? I have attached an image, I have this, but it seems that it is not the drive... What do you think?

  

  @jack298

  Sad news, Jack.

  The small covered rectangle indicates where a fingerprint reader would be located if the drive has been installed at the hardware level.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• ProBook 640 G1: Audio HW buttons problem after Windows Installer 10

  Hello world.

  Last week, I upgraded from W7 to W10, installed all the drivers from HP and upgrades all the buttons and then the keys fn + hardware configurations worked as expected.

  Today I swapped HDD with SSD and installed a clean W10. Yet once with all HP drivers, including sp71790 Hotkey support and support wireless sp71707 button.

  Now the wireless button keys fn + f9/f10 and fn + f6/f7 works as it should, but rather:

  -the works of Mute speakers button (speakers get mute and screen popup confirmation appears) but still, it stays white and is not orange when muted. It's infortunate because mute State speaker is missing.

  -does not work microphone mute (fn + f8) and signalling led on the button turns on. (The microphone itself works, but she's not get dumb).

  These features worked flawlessly in W10 when upgraded to W7. In the new facility, that they do not.

  Can someone help me?

  Thank you.

  PROBLEM SOLVED

  Audio chipset on my G1 640 is audio IDT high definition.

  Unfortunately, it seems that no updated drivers are available after 2014 - win8.1

  I just took and installed the IDT audio driver in the list of drivers for the G1 640 win8.1.

  Now, all the keyboard shortcuts work properly and a panel of additional audio control with various features and functions has been added.

  Win10 instead by default installs a sound driver of 'High definition' of Microsoft which is probably a simplified version of vanilla with no improvements, but the most important is not well interact with HP quick access keys.

  HP should get aware of this and direct customers towards using the old win8.1 IDT, not the driver Microsoft.