ProBook 6475b modem broadband

Similar Questions

• Satellite A500 - modem broadband 3G does not connect to internet

  Hello

  Can someone please help
  I am from Ireland and have a modem broadband three where you plug in the USB, Broadband Mobile it is called.

  I downloaded the software ok but I can not connect to the internet, always says failed to connect, the modem worked well on another laptop.

  I am using windows 7 and my laptop is a Toshiba Satellite A500.

  Three told me to contact Toshiba as it is a problem with the laptop... What would be this,

  Be greatfull for help...

  Nigel

  Hello

  You said that the modem worked fine in another laptop. But the other laptop uses the Windows 7 operating system?

  I doubt s a cell phone number since you are using an external modem has nothing to do with the laptop.
  Maybe you have installed some kind of security software (firewall, etc.) which prevents the software of modem connection of the ISP (internet service provider).

  Please check the firewall settings!

• I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this 'exception unknown software exception (0xc00000fd).

  Svchost.exe - application error

  I use windows xp professional edition. I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this
  "The exception unknown software exception (0xc00000fd) occurred in the application at location 0x5b8787ad.
  Click OK to terminate the program
  Click on CANCEL to debug the program.

  If I clicked on ok and cancel, it disconnects Internet. the message again after the computer restarts and the connection with the internet. and also the internet Explorer does not open I tried several times but it doesn't work. What can I do to slove this problem. Please help me.

  Hello

  ·          When the issue started?

  Step 1: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

  Step 2: Check if the problem persists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

• Router without wire and/or alteration external Modem broadband

  Hello community,

  I have a strong feeling that my router wireless or modem broadband external has been hacked, or at the very least, is manipulated by someone else.  For example, my wireless Internet has suddenly been lost between 10 and 15 times during the month of November (and there was no climate to cause this). Also, when I use my laptop especially in early evening, the wireless Internet connection disappears suddenly. When I call the ISP and an agent to make a diagnosis of the problem, the Internet connection will be back. However, as soon as the conversation of the agent is complete, the wireless Internet will fall and does not return until the next day (and it happened again last night, Monday, December 3, 2012). It is no coincidence and therefore provide evidence that my wireless router and/or the model external broadband is falsification by someone else.  Furthermore, my office is connected to an external modem via the wireless router and use a connection to the local network to the Internet.  However, to have been taken when the Internet connection suddenly disappeared as well. Whenever I have troubleshoot with Windows 7, it will diagnose that there is a "problem with the adapter or wireless access point, but can not solve the problem."

  In regards to my wireless router, I made a critical mistake do not change the username and the word common for her when the router was first installed in April 2011. I changed the two this summer, something is flooded with my wireless Internet misadventures.  Also, I noticed that when I connect to my wireless router (brand and model: TP-LINK-WR941ND) and have completed all the changes in the configuration, there is no logout key to engage. Upon his return to the home page and resume immediately the IP address of the router, access is still open.  I have to close the browser and then come back before my user name and security key (e.g., password) are required for access. Also, I checked the router DHCP clients list to see if it is accessed by others, but my office and the physical address of the laptop is shown alone. Should I get a new wireless router or have my ISP change the modem broadband, or both?  Your ideas on how to fix this problem is appreciated.

  Thank you in advance.

  MoPete

  Hi Mopete,

  Thanks for posting in the Microsoft Community. According to the description provided, looks like you want to know why the connection Wi - Fi and internet is disconnected frequently.

  You checked the list of DHCP clients and only the recognized IP address is your desktop and laptop computers. This means that the router is not accessible by anyone else.

  Once the configuration of the router, the browser should be closed and reopened for the security settings enabled on the router, so it's normal.

  If the router is disconnected frequently, you may need to update the firmware of the router.

  Visit this link and click on the version number you are using and check if the router is upgraded to the latest firmware.

  http://www.TP-link.com/en/support/download/?model=TL-WR941ND

  In addition, visit this link:

  Secure your wireless network

  http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• 8 win does not recognize modem broadband

  Hello

  I use the Win8 Pro and have a Lenovo X 220 with modem broadband. Problem is Windows does not recognize it as such and so I can't use the new features.
  Someone have an idea of what I could do or has the same problem and found a solution?

  Kind regards
  Thomas

  Hi Thomas,

  You can review the article and follow the steps in the link from the manufacturer's website:

  No driver of Broadband Mobile Ericsson F5521gw for Microsoft Windows 8

  http://support.Lenovo.com/en_IN/detail.page?docid=HT076016

  In addition, you can validate the application in the community of Lenovo support for further assistance:

  Reference:

  http://forums.Lenovo.com/

  Thank you.

• Equium A60-152: cannot open Web pages with USB modem broadband

  Hey man
  Bought a second hand Equium A60-152 today.
  Everything seems to work fine, but when I connect to the net using my modem high speed external USB I can't open web pages.
  It of the connection ok but does not do anything when it is connected.
  What I have to disable the built in modem so it can work properly?

  Long live man

  Waigy

  Hi Craig,.

  You should not have to disable the built-in modem in order to use your connection high speed USB.
  In fact, I usually recommend having both connections defined (a normal broadband and PAYG dial-up version). How can I access my ISP even when I'm somewhere that is not allowed to wide band.

  I guess that you can access your normal home page of ISP correctly? In which case I would suggest that you check the settings of your browser and your virus protection and firewall options.

  Kind regards

• Satellite M110: The USB Modem broadband wireless fails to install

  Hi all

  I have a satellite M110 machine under XP SP3.

  I've tried two different brands of wireless USB modems. The two installation the corectly modem drivers and Device Manager shows this. However, pilots of Port of Coms do not install. The installation wizard displays the message "driver did not install correctly, Access is denied."

  Modem providers cannot explain failure given that the modems will work on my desktop machine (vista) without any questions just plug-and-play so to speak.

  I tried-

  (1) disable all anitvirus programs and firewalls.
  (2) deactivation or deletion of all other modems and internet connections
  (3) update BIOS
  (4) restart completed after all the above steps
  (5) verified all the drivers are the latest and the greatest part up to date.

  Returning the status 'out of box' re-loading of windows is not an option I've run a number of programs on my machine that are no longer available in the format that I use in my business. A suggestion was made by a tech Windows registry values are incorrect and are blocking the installation?

  You said, that the Wireless USB modem works on your desktop with Vista. Modems supported by Windows XP or Windows XP SP3?
  I would like to do a downgrade to SP2.

  In addition, I think that the best way would be a reinstall of Windows. If it s not an option, try it on another HARD drive in the laptop.
  You don't, so no risk of losing your data.

• Why my pc will not install a modem broadband?

  I need help, try installing a modem up flow of cricket, the company couldn't help me more something wrong with my pc, when I connect the modem a yellow window appeared "new hardware detected", then it says that your hardware is installed and ready to use, but no icons, no software to not install, no internet, nothing... I should mention that I used this kind of modem before and I uninstalled the program, I check on "add or remove programs" is not there... what could be? It works perfectly on my sister's cell phone... is so on mine... What do I do? I have a windows xp service pck 3... Help me please!

  Rylie salvation,
   
  -What is the model number of your modem wide band?
   
  Check the device status in Device Manager
   
  To display information about a device driver
  a. click Start, click runand type devmgmt.msc and press ENTER to open the Device Manager.
   
  b. double-click the type of device that you want to display.
   
  c. right-click on the specific device and then click Properties.
   
  d. in the tab driver , click Driver Details.
   
  Check this link for more information:
   

  How to manage devices in Windows XP

  Keep me updated on the status of the issue.

• USB modem broadband does not connect after upgrade to XP Pro

  I use a high modem flow Cricket to connect to the internet, but lost the connection from the upgrade of XP Home, XP Pro. I have a Compaq nx6310. Recently upgraded to Windows XP Professional (ver 5.1, service pack 3) The Cricket Modem plugs into the usb port. Now, I get the error message "a connection to the remote computer could not be established. You may need to change the network settings for this connection. "Received error 720: PPP settings on my computer and on the remote computer do not match. (see screenshot below)

  Firewall is configured correctly to allow the modem in Windows Firewall and my anti-virus program.

  I have determined that it is not the modem because it works correctly on the borrowed laptop.

  I spent several hours on the phone with the internet provider and it was determined that the modem is working properly according to the diagnosis, they talked me through as well. It was at this time tech ISP suggested that I have to contact HP.

  Any comments would be greatly appreciated. Thank you in advance for any ideas or suggestions.

  

  Problem solved after hours even over the phone with Cricket.

• Measure the speed of download of modem broadband

  Can someone advise me how to measure the real speed of downloading on my mobile broadband after any time. I would like to know how many Mbps, he realizes in fact, and not what the camera is capable of.

  Use the performance monitor on my PC?

  The operating system is Win 7 Home Premium, 64-bit

  Thank you very much

  Chris

  http://www.Speedtest.NET/

  One of the many linkages

• Installation of Windows 7 does not connect to the modem broadband.

  I installed characteristic of two different versions of Win 7 64 on my desktop at different times.

  The two does not connect to my modem. I get error 651. I've tried everything.

  I have consulted my ISP, checked the provider. The installer works fine with other OS and Win 7 on another computer.

  My office tells me that there is no driver installed. There is no driver to install.

  I need a connection to the firmware in the modem to work, something that seems missing from Win 7 Home Premium 64.
  Your background of catch-22
  LCW

  See this previous post/answer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-651-in-Windows-7/65077414-15f8-450b-BD19-5cce9a57fcf0

  PS after I clean installed did you get your motherboard manufacturer system drivers, if a generic desktop computer, or if from a major manufacturer, for example Dell/HP support site?

• How to install the Modem broadband 3 G on my Tecra R850

  I want to install hardware for high-speed mobile 3g in my Tecra R850 pt520a - 01 s 003. is this possible?

  This is a fairly new machine and I don t think that someone here can help you with this.
  I put t know if this model is ready for these updates.

  I recommend you contact the closest service Toshiba and ask for help. I'm pretty sure they're accurate and manual of maintenance equipment plans, where they can check if these updates is possible or not.

  By the way: where do you buy the material missing for upgrade?

• Airport Extreme and Broadband Modem/Router

  I have my Airport Extreme (5th generation) plugged into a Broadband Modem/Router combo. I would like to have both able to use their wireless capabilities. The Airport Extreme has been previously connected to a Modem broadband all my IP addresses came by Airport Extreme (192.168.2. *). With the New Modem/Router combo broadband, it uses 10.0.0 * so I would be able to use Airport Extreme to add the 192.168.2. * While having the 10.0.0. * the Broadband Modem/Router combo.

  Is this possible and, if so, how do I configure Airport Extreme to do?

  Normally, you don't want two devices on the same network as the two try to act as routers to the same network. Which will produce conflicts of IP addresses... which can possibly be addressed... and a Double NAT problem, which cannot.

  The Double NAT error can cause a number of unpredictable issues... things like the problems of communication between the devices on the network, slow navigation... or, not navigation in the case of certain websites, Internet access slower, to name a few.

  Yes, some users may get away with a Double NAT on a single home network, but unnecessarily complicating things over a network is normally something you want to avoid.

  We do not recommend it, but if you really want AirPort Extreme for use range 192.168.2.x however, you can easily make this change using AirPort Utility. If you are not sure how to do this and need help, then we will need to know which version of AirPort utility you are using.

  To find, open AirPort Utility, and then click the menu of AirPort Utility in the far left of the screen corner. Click on about AirPort Utility to see what version you have and post back with that info.

• HP Pavillion G7096EA & a modem to broadband from three (Huawei E220).

  Hi all

  A friend bought a laptop HP Pavilion G7096EA 2 weeks and also signed for three broadband. Its three modem is a Huawei E220. When it is plugged in, Windows Vista does not recognize the modem correctly. Normally, these modems will fool the system into thinking that they are a CD-ROM drive and autorun to install the three Dial Up application. After 1 minute, he is recognized, but no software or drivers are visible to install. The modem works fine on 5 or 6 other PCs / laptops. I managed to install the three application on this laptop G7096EA but do not always recognize the modem.

  I ran all the updates that are available from HP.com for this laptop model and still nothing.

  I have also connected to a modem broadband O2 (also Huawei E220) and that was ok.

  Any ideas?

  It turns out that the new Huawei E270 modem high flow O2 works very well, so we managed to get online.

  I hope this helps.

• How to send a fax from my A210 the internal modem?

  I have a laptop with Windows Vista Home Premium and Office 2007 Professional A210 and use the wireless network card to connect with our modem broadband.

  For my company, I would like to be able to send faxes through the normal phone line direct to my laptop, instead of purchasing a fax machine.
  There is only a Toshiba Software Modem attached to COM3, but I can't work out how to use it to send a fax.
  On older computers, I was able to configure the modem fax as a printer driver and sent faxes directly from Word using a print-to-fax option.
  I find nothing in the General help Windows or using Word that shows me how to do this on my laptop.

  Any suggestions gratefully received.
  Gillian

  Hello

  This requires additional software. Google for "fax software.
  When you have installed fax software, you will have a printing device named Telec...

  I hope this will help you