ProBook 6570 manual b

Similar Questions

• ProBook: Windows freeze on ProBook 6570 b - Diagnostics failure ID...

  I have notebook ProBook 6570 b problem with Windows 64-bit 7Prof. My warranty just ended.

  Recently, it freezes everytime I try to open the new program, install something or open the browser. Is sometimes gel just after the start. ALT + ctrl + del does not work every time. When I open the Task Manager, the CPU usage is very low and it uses only a few % of memory.

  After diagnosis HP at the start, I've got this failure ID:

  94G5B0-1LN7HQ-MFKSXG-60Qe03

  Chkdsc gives no error.

  Does that mean ID failure (can't find enywhere)?

  60Qe03 is probably the failure of disk (according to google). Should I buy a new drive and reinstall Windows? Or should I try Windows recovery on this drive? Average whitch of go - disk or system?

  Hello

  ID done failure refers to failure of hard drive. You need to replace the HARD disk, and then install the operating system by using a recovery disk set and this will solve the problem.

• Resolutions supported Probook 6570 b

  Hello

  I have a ProBook 6570 b with an Intel HD4000 gpu.

  Right now I have two monitors connected: the two powered meanless 1680 x 1050, a VGA one on displayport.

  I would like to upgrade from a couple of 2560 x 1080 screens (LG 25UM65-P), but of course before I buy them I would like to know if these screens are supported in resolution?

  Anyone who has experience?

  Hello @tiger79,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you want to know if 2560 x 1080 resolutions are supported on your laptop to dual-screen setup, and I would be happy to guide you to a resolution!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do it:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/BD-p/BSC-274

  I hope this helps!

  Concerning

• ProBook 6570b: need PCI Simple Communications Controller driver for Probook 6570 b W7 64 bit

  HP Probook 6570b running Windows 7 Pro 64 bit OS

  of the hardware id

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_17AB103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_17AB103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI VEN_8086 & DEV_1E3A_0780

  Thanks in advance!

  Hello

  Should be the engine of the IMEI on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212866 & swItemId = ob_124514_1 & swEnvOid = 4059

  Kind regards

  DP - K

• To replace the DVD drive with the second HARD drive on the Probook 6570 b as for the BIOS setting

  After you replace CD/DVD player with HARD drive in the Bay of correspondence, I had a problem with the BIOS. After starting, I received a message 'there is not a boot manager' and CTRL + ALT + DELETE. So is that posible F9 and start to use Option manually hard. Please tell me what I should do to fix this problem.

  Thanks for your advice. I remember what I had to do in the BIOS. I had to choose the Boot Option and excludes "Boot from Bay upgrade". That's all. Of course subsequently followed "save all".

  in respect

  Military

• ProBook 6570: wireless card

  my original wireless card has been stolen and I get new one its intel 3945abg and I get alert abios who says map unsupported with the model of the device

  How I can solve this problem and if I can not what's taken cards supported with my camera?

  Hello

  Geez, how could someone enter into your computer to steal the wireless card? In any case, your device supports the following cards:

  • Intel Centrino Wireless-N 2200 802.11 b/g/n (2 x 2)
  • Intel Centrino Advanced-N 6205 (2 x 2)
  • BCM943228HM4L of Broadcom 802.11 a/b/g/n WiFi Adapter (2 x 2)
  • Atheros AR9485 802.11 b/g/n WiFi Adapter (1 x 1)

  Source: http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03370081  

  You can use only one in the list above.

  Kind regards.

• upgrade processor ProBook 6570 b

  can I upgrade my processor intel core i5 to i7?

  Yes.

  What follows is the compatible processors as seen in the picture. They must be the exact model CPU as shown.

  

  Best regards

  ERICO

• HP ProBook 6570b: Windows 10 ProBook 6570b BIOS update

  When will there be a version 10 of Windows to upgrade the BIOS (the more recent version, currently available for Windows only, 8.1 F.62 Rev.A, file name sp71172.exe) for my HP ProBook 6570 b?

  In fact, you can update using the file for Windows 8.1:

  1. Download the BIOS update sp71172.exe for Windows 8.1.
  2. Run, but do not select update now, but to create a USB key for update.
  3. Follow the instructions to create the USB key. This works on Windows 10.
  4. Reset.
  5. Access the configuration Menu by pressing ESC followed by F10.
  6. Find the option to update the BIOS on the USB key and follow the instructions.

• ProBook 6570b: recovery or reset BIOS password

  I recently bought a HP Probook 6570 b on ebay and I do not have the BIOS password. Please let me know how to reset

  Thank you

  series # [redacted]

  UUID 8F04DB553D1CE311B6206C66B900008D

  SYSTEM CONFIG ID A1019DD200

  68ICF BIOS VERSION F.43

  @mlawrence39

  MDL will not work on the models ending in xx70.

  For this model, you will need to contact HP.

  http://welcome.HP.com/country/W1/en/contact_us.html

  When you talk to the HP rep ask them to increase your service request.

  REO

• ProBook 6570b: screen brightness works do not, the unknown device on PCI

  Hello

  I have a Probook 6570 b with processor i5 here. He is running on W7 x 64 professional. As in all computers, we decided to replace the hard drive for an SSD. After replacing the hard drive and reinstallig W7 and drivers, there is a problem that I can't fix. It seems that I can't get the Fn keys for brightness screen work. The others work, volume gives a nice popup, evenso buttons additional display.

  Unplug the power supply makes the screen dim brightness. Who works. In the energy configuration screen, I can also adjust the screen brightness properly. Only the driver for F9 and F10 does not work.

  I don't know if it's related, but in Device Manager, I get an unknown device on a PCI bus. I have not been successful in finding drivers for this one as well. In the detailed tab, it says: * HPQ6000

  Thanks for responding!

  Hello:

  The 6000 HPQ needs this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_124200_1&swEnvOid=4059

  Have you installed the graphics driver and hotkey?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_129672_1&swEnvOid=4059

  I can't give you the graphics driver because your laptop can come with 2 different graphic configurations.

• Missing a few windows Xp profesioan Edition drivers for HP probook 6570b

  Hai,

  I am trying to install windows xp professional edition in my HP probook 6570 b, but I got six (6) lack drivers according to the details below;

  Device high definition Audio Bus audio
  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2806 & SUBSYS_80860101 & REV_1000\4 & 330 6499 B & 0 & 0301

  Base system device
  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C & REV_30\4 & 2322AC93 & 0 & 01E2

  Controller Serial Bus (USB)
  PCI\VEN_8086 & DEV_1E31 & SUBSYS_17AB103C & REV_04\3 & B1BFB68 & 0 & A0

  Unknown device
  ACPI\HPQ6000\3 & B1BFB68 & 0

  Unknown device
  ACPI\IFX0102\4 & 828BA89 & 0

  Controller VGA (VGA Compatible)
  PCI\VEN_8086 & DEV_0166 & SUBSYS_17AB103C & REV_09\3 & B1BFB68 & 0 & 10

  I tried to download and install all the drivers page drivers oh HP Web site, but still it is not resolved.

  Please help me on this.

  Thank you.

  Hello:

  USB 3.0 controllers (PCI VEN_8086 & DEV_1E31) have no XP drivers.

  For XP, check your BIOS settings have the xHCI mode set to 'Auto' or 'Smart Auto'. Rearrange this USB 3.0 ports to function as USB 2.0 ports by using the native Windows driver * EHCI.

  This pilot must instal; the Intel HD graphics driver and the Intel HD Audio driver.

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2806

  PCI\VEN_8086 & DEV_0166

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212927&prodNameId=5212928&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-120629-1

  This driver should install the DEV_2392 & PCI\VEN_197B:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212927&prodNameId=5212928&swEnvOID=1093&swLang=13&taskId=135&swItem=ob-115195-1&mode=3

  This driver should install the ACPI\IFX0102:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212927&prodNameId=5212928&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-78959-2

  And this driver should install the ACPI\HPQ6000:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212927&prodNameId=5212928&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-107774-1

• HP ProBook 6570b: Second hard drive

  I want to add a second HD to my Probook 6570 b cannot take my ProBook a second drive.

  Hello

  No, but you can use ODD as the next caddy slot:

  http://www.eBay.com/ITM/2nd-SATA-hard-drive-SSD-HDD-caddy-for-HP-ProBook-445-450-470-G0-G1-G2-DU8A5SH-/261751127331

  Please watch the following video:

  https://www.YouTube.com/watch?v=H2XJ7f28dZU

  Kind regards.

• ProBook 6570b: VTx is enabled in the BIOS but does not work

  Hello

  I use ProBook 6570 b after update, with Win 7 Profesional 64 b (a second) i'm running a bios F.62 Rev.A April 7, 2015, that I got from HP support web site. I activated the VTx in bios but its seems that this is not enabled (the Microsoft virtualization detection tool used).

  I turned the PC out to the battery, expected 15 min, upgrated bios 2 x and it still does not seem to work.

  Any ideas? Thanks in advance

  Hi, it fixed by uninstalling Avast antivirus, does not help turn it off, you must uninstall it.

  Thanks anyway

• DisplayPort not answer & causing the BlueScreens

  Dear HP team

  I bought two ProBook 6570 b as well as HP and four HP EliteDisplay E231 screens Docking Stations. My configuration is:

  The ProBooks are connected via Dockingstation and DisplayPort with two screens of each. I use a hub of MST of the Club for the DisplayPort connection. An installer works perfectly, the other problems.

  AMD Catalyst Control Center shows both screens, and even the Option of desktop resolution shows that the two E231 are identified and I can arrange them. Well, even the mouse disappears on the screen to the right (expand the office, left of the screen is main screen). But the right screen keep black, received no signal and goes into standby mode.

  The 2nd caused 'challenge' is: after a few minutes, sometimes seconds, Windows 7 Professional 64 bit blocks with a blue screen. As soon as I unplug the right Club STD Hub, laptop/windows computer screen/run s fine.

  I can also run very well if I only work with the right screen connected directly to the port of the docking station and do not use the MST Club DP Hub

  If I connect through the Hub of STD of Club, there's no signal.

  As soon as the two are connected via the Hub of Club of MST, problems/accidents happening again.

  Thanks a lot for your help.

  Christian

  I found a solution and - why not I it earlier... However, it's sort of a simple fix.

  A HP Elite231 screen is now connected via DisplayPort adapter to the HP Docking Station.

  A HP Elite231 screen is now linked through DisplayPort on the DP-Slot of the notebook: Fortunately, the DP-slot on the HP EliteBook is on the left edge of the back, so the cable can be easily connected.

  Contra: whenever the laptops must be removed from the docking station to visit customers, the cable is unplugged and replugged once back at the table manually.

  Chao, Chris

• Silent installation for the support of the shortcut key?

  It is really a last resort for me to post here. I looked everywhere else I can.

  Can someone tell me please how to install the latest version of the assistance of hotkey HP softpaq silently and without a restart?

  • The laptop I have is a Probook 6570 b
  • The OS is Windows 7 Pro x 86
  • The softpaq is: SP59202 (version 4.6.10.1)

  Previous versions of this permit for a silent installation, no reboot, but the last is different.

  I can get it to install by extracting the Setup.exe from the SP59202 executable and it works with the switches: s/v/qn/s but it still restarts the computer at the end.

  It MUST be possible. Help, please.

  Andy.

  AndyChips,

  Perhaps too late, but here's what works for me. Run the 'setup.exe' on any machine to decompress. No need to complete the installation, simply start it. Once you start manual installation it will unpack everything into something like C:\Users\username\AppData\Local\Temp\{2A7766D0...}. Download the entire folder in MDT. Also, I tried all sorts of variations/q /quiet/ - s, etc., but it never worked for me. Once I tried:

  msiexec /i "HP Hotkey Support.msi" /qn /norestart

  Andi that it worked. The package I've used is sp59346. Could also help you! ;-)