ProBook b 6460, one on the side left USB ports not working not

Similar Questions

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers

• Spectrum of HP 13-v013tu: USB port not working not not the spectrum 13

  Hello.  I bought the HP 13-v013tu a few months ago spectrum and in general the laptop works very well.  However, I noticed that 3 C type USB ports in the back, one of them do not work.  The USB port for the electrical connection to the right is fine, but the two in the Middle, one of them work.  Who does not work does not recognize or even to send power what it is connected (for example, the mobile phone, the external hard drive, load wireless mouse).

  I checked the Device Manager and see nothing wrong in the USB options.  Even the option of power management to allow the computer to turn off the device has been disabled.

  Can anyone help? Is this a hardware problem?

  Thank you.

  USB - C for USB 3 adapter supplied with the laptop you are using? If it works in 2 of the three ports, then the logical conclusion is that the third part is bad. You can actually power the laptop of one of the Thunderbolt-C/USB ports (I have one of these laptops) in order to try in the port which is giving you issues and if he does not have the power, then you have a dead port which will require the replacement of the motherboard.

• Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizont

  Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizontally, which makes the pages of Mail of Hotmail impossible. I have connected since using the Explorer MSFT and it works very well. This problem occurs only on the page of Mail of Hotmail Live not on the home page or other.
  Could you please let me know if there is a problem with Firefox, or if you have any advice on how to restore the appearance of Hotmail in Firefox?

  This has happened

  Just once or twice

  == I'm compiling an email in Hotmail Live

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom

• When I wear the watch on my left wrist and Iset the orientation of the digital Crown for the side LEFT it also stops receiving notifications? I tested it again and again, but if the digital Crown is set to left on left wrist ir stops receiving notificatio

  When I wear the watch on my left wrist and I set the orientation of the digital Crown also for the side LEFT, he ceases to receive notifications, I tested it again and again, as soon as counsel for the Attorney general setting is left on the left wrist... notifications stops on the watch?

  Hello

  How notifications behave depends on the State of your devices and on the configuration of your watch. In order to provide notifications to your attention as soon as possible:

  -If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.

  -If your iPhone is locked or asleep and that your watch is unlocked and on your wrist, you will receive notifications on your watch.

  -If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  More information: on your Apple Watch - Apple Support notifications

• I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPEN IT AND PUT AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL ERRACER OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPENED IT AND PUT IN AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL GUM OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  Hello

  You are probably using the Quick - switch to Expert mode at the top. All the tools are only available in Expert mode.

  Brian

• Qosmio G does not recognize the mouse using two left USB ports

  I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

  The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
  He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

  In any case the mouse doesn't at all plugged into ports on the left side.

  Does anyone have any ideas as to why what is happening?
  Look of Sean.

  Hello

  Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
  Maybe you should do this to see if it could be a defective USP port.

  But I recommend to test this;
  First disconnect all USB devices
  Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
  Close all windows and restart the laptop.

  Finally the operating system should recognize the new devices (USB ports) again.
  Connect a USB device to one of the ports on the left and check if it would work.

  Good bye

  PS: What Qosmio do you have?

• Pavilion g6: 2 left usb port of the computer hp laptop pavilion g6 does not

  2 left usb port are not work ing after 7 (64 bit) laptops.windows formatting has loaded.two usb ports on left side doesnot answer

  Hello:

  You probably have to install the applicable usb3 driver.

  What is the complete model number or the product number of your computer laptop g6?

  Many products are on the label as well as the serial number.

• Windows 7 and using Google Chrome - the arrow pointing down in the side scroll bar does not appear

  Have Windows 7 and using Google Chrome - the arrow pointing down in the side scroll bar does not show unless I click on far right of the bar to scroll down and then click again to bring Google chrome

  Hi NeilHacking,

  The issue is specific to Google Chrome?

  If the problem is specific to Google Chrome, I recommend you to ask your question in this link:

  http://productforums.Google.com/Forum/#! Forum/chrome

• I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You mi

  I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You may need to install additional software to open this address. "Someone knows what's going on?

  Please try to download from: https://helpx.adobe.com/creative-cloud/help/install-apps.html. You can also try to download using the different browser.

• Satellite M300 - left USB port does not work

  Hey,.

  I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

  Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

  Any advice? Thank you very much!
  Dan

  Jin

  I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

  Greers

• Scan network diverts the mouse's USB port

  An MFP HP Color LaserJet 6040f network sends the scanned documents by e-mail in MS Outlook to a work station #AKD of 722EA WB HP networking with Windows XP SP3.  Not always, but sometimes the USB mouse stops working when is electronic mail and must be connected to another USB port. I tried a few times in a row, and whenever I had to plug my mouse into a new USB port (not all previous).  Fortunately, we have more than 4 USB ports available.  What can cause this problem?  It seems as if a software USB port assignment are taken hostage by the software of the scanner and reinterpreted as a port for the transmission of electronic mail.  Restart returns things to normal, but I wonder what other than getting a mouse PS/2, or rely on return to normal for most of the time.

  Hello

  1. have you you can all changes on the computer before this problem?

  Step 1: Try to uninstall and reinstall all USB controllers and check.

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers. (Restart the computer will install the USB drivers automatically.)
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  Reference:

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• The key saved on my eMachine is different than the one on the side of the case. Why?

  Windows vista key

  I bought an emachine with vista 09 I recently made a resumption of sys the record key showed is different from the one on the cover of pc why is this

  Computers that come pre-installed with Windows usually manufacturers come with two product keys.
   
  OEM SLP: It's the key provided in Windows (from the factory). It works by connecting to a flag of BIOS (SLIC table) found only on the computers of this manufacturer. Once he sees the correct BIOS indicator, it auto active.
   
  COA SLP: It is the key on the sticker on the side, bottom or in the compartment of your machine. The purpose of this key must be used in the case that the OEM SLP activation stops working for some reason any.

  The key to the recovery system uses if the OEM_SLP key.

• How I fixed my USB ports not working not problem. Two ports left side previously does not... HP Dv7

  So I do not know what is not "where it will honestly, but put there just to try to help someone else who has struggled with this as long as I did it...» I ended up having my two USB ports on the left side (turned out to be my 3.0 ports) working again when they recognize nothing. I could use the USB 2 on right 2.0 ports, but the transfer rate was terrible.

  My answer on another question where someone had a similar problem... good luck!

  'Hi. '

  Not sure if this will help, but I had the same problem, the two ports on the left did not work on my Dv7. All this time I thought that the USB on the right were my 3.0 ports so I thought that would be nice, but it's been over a year that I initially had this problem and made a bunch of maintenance of the system meant that I would look through it again. In any case, I went to the Device Manager through the computer management tool. I know that you can go straight to the Device Manager, but just give you exactly how I did it. You can search just to start computer management.

  So I chose Device Manager in the menu on the left side and it looked like ordinary Device Manager. Went down to Universal Serial bus controllers... at this stage, I watched the action menu on the right and select more actions, opinions and you click Show hidden devices. After that I went through my USB controllers one by one as I had done many times before and checked them, tried the update of drivers, etc... Under the USB controllers Section, I noticed something like xHCI Host controller of compliance Test... I right click it and went into its details, I tried the driver updated and installed the new driver. 2 new USB controllers immediately arises: Renesas Electronics USB 3.0 Host Controller and root hub.

  Switched on a test drive from the right thumb to the left and the computer instantly recognized and installed the driver for the stick.

  And that was all... hope it helps even if this is later. "

  Hi @klark1kent,.

  Thank you for visiting the Forums Support HP's, welcome and thank you for the important information.

  Have a good week.

  Thank you.

• move my taskbar to the side, so he does not hide my information___

  When reading based online bridge, my taskbar obscure information when it is on the top or the bottom. I need to move it to the side.  How?

  http://Windows.Microsoft.com/en-AU/Windows-Vista/unlock-and-move-the-taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

  See you soon.

  Mick Murphy - Microsoft partner