procedural VMotion

Similar Questions

• Enable vMotion, vSphere 5.0

  Hello

  I'm an intern and I must implement a cluster architecture I put in place of a cluster on two ESXi with vSphere 5.0.

  I must implement vMotion for VM hot migration

  Is what someone can me pour orianter on the procedure enable vMotion on hosts?

  Thanks in advance

  Robin

  With the ESX on optative have addresses vMotion on the same subnet as the management. With the ESXi, is obliged to have a separate subnet for the vMotion...

  I had the problem during my migration en ESXi... and it was the answer to VMWare...

• Transfer of virtual machines from a server ESXi 3.5 to new ESXi 4.1 server. What is the procedure.

  I read on how to transfer a virtual machine from one server to another using VMotion. Not 100% clear on the process again. What I see or read is when you do this since an ESXi 3.5 Server ESXi 4.1 server, I do not see any information on, if possible. In addition, I have not read if I need to convert or upgrade the virtual machine until I use it on the new server. So, my question is, are there any special instructions, conversion tools to convert a VM created 3.5 to use on the new Server 4.1? Is there a detailed procedure that I have not yet found or read best describes this process. Like I said up to now I'm not 100% clear on the procedure. Thank you.

  ESX 3.5 VMs can run without modification on a host ESXi 4.1 - VMotion between the two hosts, you will stiil need to ensure CPU compatibility between the hosts.

  Maybe it's the best guid for upfrading to vSphere - http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• VMotion Newbie

  Hi, sorry for me being a newbie

  I think I have read all the ESXi sysadmin guide, but I can't find all the details on how to put in place really Vmotion on ESXi 4. From what I understand, from here and besides it is the procedure, is that correct?

  1. prepare two ESXi and VCenter hosts with necessary license.

  2 turn on the Vmotion feature in the host network interface

  3. prepare a shared storage, in this case I'll use iSCSI

  4. connect the two hosts of the same iSCSI LUN

  5. create a virtual machine on a host

  6. click on the virtual machine and try to "migrate".

  Is this correct?

  Thank you.

  .. .and make sure you have the CPU compatible vmotion.

  Attached, it's a pretty good how, with a few troubleshooting steps

• vSphere eval - no vMotion?

  I'm running two ESXi 4 hosts using Openfiler as a target of iSCSI SAN and I'm running a vSphere 60-day eval version. The eval page says the included eval "vSphere Enterprise Plus" and 'vCenter Server Standard'.

  On my guests when I try to activate the VMotion on the iSCSI storage ports group, I get a message that says, "license not available to perform the operation. ESXi 4 server for host x.x.x.x license does not VMotion. Update the license.

  In the activation e-mail I received, there is a link "Activate your VMware ESXi license and access your download" link took me to a web page of VMware with a license key. I have used this license key and if the eval includes "vSphere Enterprise Plus" I wouldn't access VMotion?

  Thank you

  I don't know about ESXi, but expected the same procedure like ESX version:

  ESXi login-> Configuration-> license features-> change. Then choose 'Assign an existing license key to this host' and select 'assessment '.

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support

• This procedure is a diagnostic test.

  The question how to delete this file EtreCheck found:

  ~/Library/LaunchAgents/com. [email protected]-SharedServices.Agent.plist

  /System/Library/frameworks/CoreServices.framework/frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert - /Users/GeoffreyMcCabe/Library/Logs/[email protected]- SharedServices.log u l @me.com SharedServices s t

  Search me has led to an older discussion-"this procedure is a diagnostic test"...

  I ran the test recommended in the Terminal, but this window says there are invalid characters...

  Are there any alternatives to the procedure or updates?

  Thank you...

  Open your library folder of the user by holding down the Option key and selecting the library from the menu go to the Finder.

  Find the LaunchAgents folder and open it.

  Search for the file with the same name as on the Etrecheck and delete it.

• My googlemail is blocked due to a forgotten password, but google for the recovery procedure continues to send me round in circles.

  My frozen Googlemail account a few days ago, and I had to use the procedure of recovery to thaw, which included a series of new passwords, provided by Google, which I was told that I would not need to memorize or note down. After a few hours of work successfully, the program froze again and so I am unable to receive or forward all e-mail messages. Google asks me to use the procedure "forgotten password", but I don't know what password is the system, and I continue to be sent in a circle to the same pages.
  I would be grateful for any positive suggestions and thank you in advance.

  Hi frederickwilliams, I'm sorry, but I don't think that we have no way to help you with a recovery procedure for a service of third party, unfortunately...

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• Purchase and installation of Logic Pro procedure?

  Hi, am about to buy Logic Pro X.

  What is the procedure please? I'm new on this!

  I want it on my main computer and my laptop also.

  "My main computer: Macbook Pro15" 2015, 2.8 ghz. 1.7 image, 16gbRAM, memory Flash 512 El Capitan 10.11.3

  Laptop: Macbook Air 13 ", 2015, 2, dual-core 2 GHz 1.7, 8 GB of RAM, 256 El capitan 10.11.3 Flash memory

  Thanks in advance

  Hello

  1) connect to the AppStore with your AppleID

  (2) buy Logic Pro X

  (3) download the main application

  (4) when you run the first LPX he will insist on downloading some "core".

  (5) within the LPX, go to the menu of Logic Pro X > Sound Library. ' Either ' Download All Available sounds ' or 'Open sound libraries Manager' to manually select which is downloaded (about 50 GB total) and installed.

  If it is possible to enter the installation programs before be unpacked, it is probably easier to simply repeat the process from step 3 on your second Mac.

  TDC

• What is the procedure for upgrading Thunderbird ESR 17.0.7 at 31.6 on Mac OSX 10.10.2?

  What is the procedure for upgrading from Thunderbird ESR 17.0.7 at 31.6 (last public version) on Mac OSX 10.10.2?

  Is it as simple as install new version and then run to see all local folders and my email and its folders from IMAP to my company as before the upgrade?

  Thank you

  Create a full backup of your Thunderbird profiles folder.
  Uninstall the old version of ESR.
  Download the latest version from https://www.mozilla.org/en-US/thunderbird/all.html and install it.

• Do ypu have a procedure to move the Thunderbird addresses & saved emails to Windows 8.1?

  I would like to know how can I migrate emails stored in folders and email addresses of Thunderbird Windows XP to another computer running Windows 8.1. If someone can provide a URL describing the procedure that would help me. I can't find it in this section of help.

  http://KB.mozillazine.org/Move_to_a_new_PC

• The help procedure to remove a bookmark does not work.

  I follow the procedure, click on the bookmark you want to delete. Click on bookmarks and it's still there.

  grayghost2,
  Thank you very much, who fixed it!
  Best regards, DKPL

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• NO RESPONSE TO REPEATED, NORMAL SHUT DOWN PROCEDURE: HAVE TO SWITH IT.

  FOR TWO DAYS NOW, AT THE END OF THE DAY, MY PC NOT STOP WHEN REPEATEDLY USING THE NORMAL PROCEDURE. I HAVE TO THROW THE SWITCH ON MY TOWER TO THE TAP.
  LATER COMMISSIONING IS NORMAL.

  See:

  • "Cling to the exit": http://kb.mozillazine.org/Firefox_hangs
  • "Firefox crashes when you exit the he": https://support.mozilla.org/kb/Firefox+hangs

  Use ' Firefox/file > output "(Mac: ' Firefox > quit smoking";) Linux: "file > exit ') to close Firefox if you're doing that by clicking on the X close in the title bar.