Touchpad has completely frozen

Similar Questions

• My B1 Iconia has completely frozen and has been like this for 8-9 hours. How can I fix?

  I played Minecraft: Pocket Edition on my tablet when I came across a terrain feature that I thought looked interesting. Quickly, I pressed the key combination for a screenshot (PWR + Vol. down) and was greeted by the sound of the shutter that he should do. The animation was not present, however. I then discovered that the application was completely frozen. I tried pressing the HOME button, but it turned out to be ineffective. No thumb on the touchscreen gave no results. However, my music kept playing (Spotify). I left it plugged all night, but nothing has changed since last night. I tried every possible way for one minute combination of buttons, but nothing has worked.

  If you could help me, that would be greatly appreciated.

  Thank you.

  If your system is still frozen, you can try to use that equipment reset pinhole on your tablet, to see if it will allow your system to boot.

• Touchpad has completely stopped working

  Hey, my touchpad completely stopped working. I tried to download the driver and restart and the stuff, but nothing seems to work. There was formerly an icon for it down to the right on the toolbar, but that's even more here, it's like the software so that it just doesn't even exist anymore.

  Can anyone suggest a solution please?
  Thank you

  Hello!

  You can disable and enable the touchpad with FN + F9. Select this check box, because maybe it s disabled.

  Have you tested an external mouse? You have the same problem with it?

  Good bye

• Touchpad has stopped working in my Satallite L850

  Hello

  My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

  Kind regards
  DAV

  > Touchpad has stopped working in my Satallite L850
  How to understand this?
  You can toggle touchpad by using the FN + F9 key combination?
  The touchpad driver is installed correctly?
  Touchpad is listed in Device Manager?

• Tecra A8 - Touchpad has stopped working

  Hi all!

  I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.

  I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.

  This is the information that I can view in "Device Manager", about the pilot:
  -Controller version: 7.0.302.3
  -Date: 26/09/2006

  Thanks to you all.

  Hello

  You have activated the touchad by pressing FN + F9?

• Touchpad has stopped working on Satellite A30

  The touchpad has stopped working, I tried most of what is obvious
  any ideas?

  Hi Phil,

  I assume you tried Fn + F9? This combination activates / deactivates the touchpad on and outside.

  HTH

• Satellite C series - Touchpad has stopped working Windows 8 running

  Hello

  I put t know if anyone can help.

  My touchpad has stopped working.
  At first, it only works on the login page. Now it s not there at all.

  I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
  I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

  Help please

  Hello

  Please check this Toshiba document:

  + How to change the settings of the Synaptics touchpad in Windows 8? +
  http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

  Don't forget that the necessary parameters of the touchpad are enabled!

• Touchpad has lost some features

  My touchpad has lost some features... I can still do the click function but striking swiping does not move the cursor. (I had to add a mouse to the laptop to get my cursor to move).

  It begins only after I have connected to the computer. The touchpad has all of the features, while I'm on the login screen, it starts only failed once Windows appears. Which leads me to believe that this is a setting in Windows.

  I tried to disable and re-enable the touchpad in the mouse settings functions; remove the touchpad Device Manager and restart the computer. checked all my touchpad settings were the same, none had changed.

  Windows says I have the latest drivers for the device. But just to be sure, I entered my model number of the laptop on the Toshiba Driver Downloads box and downloaded the synaptic drivers. When I tried to install these drivers installation has failed. (I have not yet tried to remove the drivers that came with the laptop, but that try next if I can't find something else that solves this problem.)

  Can someone please offer suggestions on what else to try?

  At first, I must say that it will be interesting to know what model of laptop you have and what operating system you use.

  Have you tried to turn the touchpad on or off using the F keys?

• Mac is completely frozen

  Hello

  My Mac is completely frozen (trackpad, screen, keys), it will not even respond to rerun the command and when I close the cover the Apple stays on. I was on a site that I had been on several times with youtube and agar.io and a few other tabs needed to do their homework. It comes to my iPad, but I need help. I think to leave without charge and let it die.

  Hold down the power button for about 10 seconds to force the closure downwards. Then restart in Mode safe in now the SHIFT key during startup. Once it's completely loaded up to stop and restarts normally. Try safe mode if your Mac does not commissioning - Apple Support

  And for use later, this is the forum of the iMac desktop iMac, there is a forum for the Macbook Pro.

• My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  Looks like you have jailbroken your iPad.

  You must restore like new with another computer.

• Satellite A200 - touchpad has stopped working

  I have a Toshiba Satellite A200. Touchpad has stopped working, I can no longer scroll. I tried all the settings, but it did not work.

  What should do?

  Why you n t trying to update or reinstall the driver of the touchpad?

  I think that this should be done first of all, you can download the compatible driver since the European driver Toshiba page and could reinstall it.

  Concerning

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

  My sony vaio laptop running windows vista has completed an automatic update and after that, I can't connect to my wireless network, I can access the internet with an ethernet cable.

  It worked perfectly fine before the update, I know that there is a problem with what I had the same problem in the past. The way it's been solved previously was to restore the laptop to an earlier point before the end of the update. Unfortunately I can't do that and the laptop has been completed, wiped and there is no backup where I can go to restore.

  I know I can remove some updates but don't know what 1, me it is another way to solve the problem.

  Your help would be much appreciated.

  Thank you

  Hi Nadzarif,

  You can try the following steps and check if it helps:

  Method 1:

  Because the wireless stopped working after windows update, you can check the Sony support link and try to install the latest version of the drivers for the wireless card and check if it helps:

  Sony support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Updated version has a problem in the history of the update.

  Step 1:

  You can check in the history of the update for the updates that are installed recently or before the show.

  a. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  See the Windows updates are installed

  Step 2:

  Uninstall recently installed updates and install the updates one at a time to understand what update is the cause of the problem.

  For more information, see the articles:

  Remove an update

  Install Windows updates

• Disk defragmentation has completely disappeared

  Original title: I run Windows Vista and disk defragmentation has disappeared completely. I used the search but unable to find it. Can you tell me how to get it back
  Disk defragmentation has completely disappeared from my computer. I did research for it but no luck. Can you tell me how it could have disappeared and how can I get it back

  Check if defrag is disabled in computer management services.

• Windows media player has completely disappeared from my computer. I can't find even in programs

  I have a Vista program. When I did the updates and things may have changed, my Windows media player has completely disappeared from my computer. I can't find even in programs. What can I do?

  Hello

  You can navigate to C:\Program Files\Windows Media Player and check if the wmplayer file is listed. If it is there, and then create a shortcut on the desktop or right-click on "wmplayer" and chose "Pin to start menu" and check if it helps.

  Hope this information is useful.