process of the slave?

Similar Questions

• in parallel to the max, process, process servers parallel slave: relationship

  Hello
  
  Need help to understand the relationship of what follows.
  
  I have a database with the following in the init ora.
  
  test > view parallel_max_servers setting
  
  Value of parameter TYPE
  ------------------------------ ----------- -----------------------------------
  PARALLEL_MAX_SERVERS integer 400
  
  
  test > view the process of setting
  
  Value of parameter TYPE
  ------------------------------ ----------- -----------------------------------
  whole process 500
  
  Select * from v$ resource_limit
  2 where resource_name = '' process. ''
  
  RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION
  ------------------------------ ------------------- ---------------
  INITIAL_ALLOCATION LIMIT_VALUE
  ------------------------------ ------------------------------
  process 452 500
  500 500
  
  
  
  
  Question:
  
  Linux machine, I see the PX server with ps - ef | grep 'database_name ' | WC-l-> value is to achieve a greater it 400, but less than 500. My understanding is that parallel_max_servers specifies the maximum number of processes parallel slave that an instance is allowed to have both. Why is that process parallel slave of the ps - ef | grep 'database_name ' | WC-l reached above 400. In addition, this has been verified in v$ resource_limit. The value of the column process reached above 400.
  
  
  Thank you.
  
  Published by: user1006412 on February 24, 2011 22:09

  I said "processes_ Server _all (Oracle), including both background processes.

  There are 3 types of processes:
  1 background (DWBR, LGWR, PMON etc.)
  2 (dedicated or shared server) process for the user sessions
  3 Parallels operators (also called process a ParallelQuery or ParallelSlave)

  You have 26 other methods for user sessions.

  Hemant K Collette

• Process creates the CPU to overheat and the Fans to run like crazy:

  I am ripping DVDs on different Macbook cradle fully aware that it's requiring treatment.

  The 2011 with 16 GB of ram and hard disk SSD, the process runs on 330% of the processor, blasting the ability and heat

  revolves around 100 c/213 F.

  Interesting enough the same process on 2 late Mo Pro 2008 with less ram do not overheat in the extraction process. The program are identical on all the Pros of 3 MB. The processes are the same, but on the old MBpros the processor load is between 130-150% up to more heating is not that great a problem.

  But the MBPro of 2011 with top material tearing overheating of the processor and fans running at full speed.

  I noticed that too much work with other programs or is running only a few programs at the same time seem to heat from the processor and the fans make some noise + cpu run hot with my MBpro 2011 and El Capitan.

  It is possible to restrict a program that use a large part of the resources to avoid overheating?

  Other solutions?

  Well a Late 2008 Macbook Pro has a intel core 2 duo, so the max he could run is 200% (2 CPUs time 100%) if the application can do enough on 2 processors in parallel.

  Your 2011 Macbook Pro has very probably a 4 core CPU intel i7 with hyper-threading.  If an application can use hyper-fils, there is a potential of 800% max.  The 330% could just be that the DVD cannot keep up with the CPU, so it does not hit its maximum potential because of the famine of data.

  I don't know if the speed of the DVD drive in 2008 was the same as the 2011.  If the 2011 is able to read data more quickly than the 2008, then it can provide given the CPU faster, keep the much busier CPU so it can consume more power, and more power consumption more than the heat generated.

  MacBook pro 2011 ends a DVD in less time than the 2008?

  Basically, you are trying to compare 'Granny Smith' vs 'Golden Delicious' apples and expects the same taste.

  Regarding the other programs, put this SSD in your Macbook Pro means that any code or data that the application needs to get the disc are convinced order or magnitude faster, so that the application did not slow the CPU and keep crank, causing the CPU to keep them busy and thus attract more power, which is converted into heat causing fans to run.

  It is also possible that your SSD generates more heat.  Solid State does not always mean longer running costs.  Much would depend on the brand and the model of the SSD and it is the power profile, and it draws more power for writing vs readings, and how much nature more expensive power you're done.

  Information point.  I put an SSD in my 2009 27 "iMac and it works more hot because my iMac can do more in less time.  I put an SSD in my Macbook Pro 2011 and if I ask him to do a lot of work, like backups, it starts its fans, as the SSD is always quick to provide data for backup, there is no waiting for the discs, leaving the lower idle CPU.

• I tunes store cannot process of the purchaeses at this time. Please try again later?

  I tunes store cannot process of the purchaeses at this time. Please try again later?

  Yes, there are questions according to https://www.apple.com/support/systemstatus/

  Check the site regularly, when all services are green you will be back to normal. It's not just you.

• Firefox process continues to run. I can't open a new session until I manually stop Firefox 32 process in the tax Manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

  Firefox process continues to run. I can't open a new session until I manually stop Firefox 32 process in the tax Manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

  Firefox is already running but is not responding

  • https://support.Mozilla.com/en-us/KB/Firefox%20is%20already%20Running%20But%20is%20not%20responding

  Firefox crashes on exit

  • https://support.Mozilla.com/en-us/KB/Firefox%20hangs#w_hang-at-exit

  Check and tell if its working.

• Tecra A9: Cannot enable or disable Multi Core processing in the BIOS

  I have a Tecra A9 and want to swicht out of the Multi Core Processing in the Bios, but it is impossible.

  To the old Bios version (1.50), it has been possible.

  Now I use the most recent (2.10) and I can't move the cursor to this selection.

  The special key strokes?

  If this isn't the case - where can I download the previous version of the bios where this selection is possible?

  Thank you

  Ulli

  Hello

  > Otherwise - where can I download the previous version of the bios where this selection is possible?
  This is not possible because it is always the newest available BIOS can be downloaded.

  With regard to the option in the BIOS.
  Do you mean you are not able to choose this option or you can't change the value?

  Toshiba BIOS:
  Usually the buttons PgUp / PdDn would change the BIOS page. The arrow buttons to select items. SPACE or BkSp can be used to change the values.

  But note; You can only change the value if it s interchangeable. But many options appear in the BIOS but is not editable.

• I can not burn any DVD or CD - burning interruptions of processes before the end

  Hello world!
  Sorry for my bad English, but I guess you're all updated on the Jesus are not very good in English.
  I have the following problem: I can't burn a cd or dvd. I already tried with different programs such as Sonic, Nero 7.0, I Tunes and every time I have an error that interrupts the burning process before the end.
  So I don't know what to update! I already tried to re install the drivers, but it's didtn can't change anything.
  To help you, I saved a nero error log. I hope it could be useful to someone who could help me!
  Here is the log:
  me

  5 82001080000000000666822849

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

  NT-SPTI used
  Nero Version: 7.0.0.0
  Recorder: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ - 841S atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: COACH CD/DVD-ROM 2. 1B axvodka Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ - 841 S D: CDRom0
  COACH CD/DVD-ROM F: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 2045 MB (2095084kB)
  Free physical memory: 1277 MB (1308144 KB)
  Memory used: 37%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  21.9.2006
  CD-ROM (ISO)
  21:04:46 #1 text 0 file Isodoc.cpp, line 6410
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: TRUE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  21:04:47 #2 text 0 file Burncd.cpp, line 3007
  CARPET * A DVD-RAM UJ - 841S
  SmoothLink activated

  21:04:47 #3 text 0 file ThreadedTransfer.cpp, line 525
  ReadBuffer-Pipe got 81920KB of memory

  21:04:47 #4 text 0 file Reader.cpp, line 124
  Player running

  21:04:47 #5 text 0 file Writer.cpp, line 113
  Writer D: MAST * A DVD-RAM UJ - 841S race

  21:04:47 #6 ISO9660GEN-11 file Geniso.cpp, line 3304
  First address writeable = 0 (0x00000000)

  21:04:47 #7 text 0 file Burncd.cpp, line 3301
  Turn on Track-At-Once, using CD-R/RW media

  21:04:48 #8 Text 0 File DlgWaitCD.cpp, line 277
  Last possible write address on media: 359844 (79:59.69)
  Last address to be written: 318786 (70:52.36)

  21:04:48 #9 Text 0 File DlgWaitCD.cpp, line 289
  Write in overburning mode: No. (enabled: CD)

  21:04:48 #10 Text 0 File DlgWaitCD.cpp, line 2568
  Recorder: MAST * a DVD-RAM UJ - 841S

  21:04:48 #11 Text 0 File DlgWaitCD.cpp, line 456
  > Protocol of DlgWaitCD activities:
  =========================================

  21:04:48 #12 text 0 file ThreadedTransferInterface.cpp, line 846
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 318787 (318787) original disc POS = #318787 / 70:50.37
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAST * a DVD-RAM UJ - 841S]
  --------------------------------------------------------------

  21:04:48 #13 text 0 file ThreadedTransferInterface.cpp, line 1058
  Prepare recorder [D: MAST * a DVD-RAM UJ - 841S] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 653182976, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
  -150 | Lead-in | 0 | 0x41. 0x00
  -150 | 1. 0 | 0x41. 0x00
  0 | 1. 1. 0x41. 0x00
  318787 | Lead-out | 1. 0x41. 0x00

  21:04:48 #14 text file ThreadedTransferInterface.cpp 0, line 1126
  Removed 2 blocks from end of track 1. Length: 318787-> 318785.

  21:04:48 #15 text 0 file SCSIPassThrough.cpp, line 34
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  21:04:48 #16 phase 24 file dlgbrnst.cpp, line 1724
  Caching of files started

  21:04:49 #17 text 0 file Burncd.cpp, line 4129
  Cache writing successful.

  21:04:49 #18 phase 25 file dlgbrnst.cpp, line 1724
  Caching of files completed

  21:04:49 #19 phase 32 file dlgbrnst.cpp, line 1724
  Simulation started at 24 x (3 600 KB/s)

  21:04:49 #20 text 0 file ThreadedTransferInterface.cpp, line 2669
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  21:04:49 #21 text 0 file MMC.cpp, line 21541
  Set BUFE: SmoothLink-> ON

  21:10:08 #22 text 0 file ThreadedTransfer.cpp, line 228
  all writers idle, stopping conversion

  21:10:10 #23 phase 33 file dlgbrnst.cpp, line 1724
  Simulation completed at 24 x (3 600 KB/s)

  21:10:11 #24 phase 36 file dlgbrnst.cpp, line 1724
  Burn process started at 24 x (3 600 KB/s)

  21:10:11 #25 text 0 file ThreadedTransferInterface.cpp, line 2669
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  21:10:11 #26 text 0 file MMC.cpp, line 21541
  Set BUFE: SmoothLink-> ON

  21:12:16 #27 SPTI-1040 file SCSIPassThrough.cpp, line 306
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x10
  Meaning of Qual: 0x00
  The CDB data: 0x2A 00 00 01 76 00 00 20 00 00 00 C0
  Sense area: 0xF1 00 03 00 01 74 5 0 a 00 13 00 00 10
  Buffer x 03390000: Len x 10000
  0 X 72 F1 E5 87 D3 3D 4A 96 F9 B0 73 83 14 72 A1 D3
  0XF3 49 6 93 44 25 04 6 E5 THIS 44 5F 3RD 79 47 C6
  DD EE 0XDD 3A FD 4 71 D CB F3 4B 18 BD 7 D DF 35 32

  21:12:16 #28 COR-1040 file Writer.cpp, line 302
  Illegal block order size
  D: MAST * A DVD-RAM UJ - 841S

  21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
  all writers idle, stopping conversion

  21:12:17 #30 text 0 file ThreadedTransfer.cpp, line 222
  conversion idle, stopping reader

  21:12:17 #31 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  D: MAST * A DVD-RAM UJ - 841S

  21:12:17 #32 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  21:12:17 #33 text 0 file MMC.cpp, line 16273
  start closing a Session

  21:12:30 #34 SPTI-1040 file SCSIPassThrough.cpp, line 306
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x10
  Meaning of Qual: 0x00
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 03 00 00 00 00 0 to 00 13 00 00 10

  21:12:30 #35 COR-1040 file WriterStatus.cpp, line 249
  Illegal block order size
  D: MAST * A DVD-RAM UJ - 841S

  21:12:30 #36 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  21:12:30 #37 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  21:12:30 #38 text 0 file MMC.cpp, line 16273
  start closing a Session

  21:12:30 #39 SPTI-1046 file SCSIPassThrough.cpp, line 306
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1046)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 30
  Meaning of Qual: 0x05
  The CDB data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 70 00 05 00 00 00 00 00 00 30 05 AA a 0, 00

  21:12:30 WriterStatus.cpp - 1046 file CDR #40, line 249
  Illegal disc
  D: MAST * A DVD-RAM UJ - 841S

  21:12:30 #41 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  21:12:30 #42 phase 38 file dlgbrnst.cpp, line 1724
  Burn process failed at 24 x (3 600 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.03.32a, size = 20640 bytes, created 25/04/2005 11:03 (Prassi/Veritas driver for win 2 K)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  So, thank you!
  Next time!
  Roman

  Hello

  The error log doesn't provide very useful information.
  According to this error log, the simulation was running OK, but the burning process has not been started.
  In such cases, it is very difficult to say why it happens. Maybe the drive is damage and cannot calibrate the lens correctly or using media is not compatible.
  Burning the process depands on the fields and the data that prefer to burn.
  Data, CD, DVDs are encrypted and it s is not possible to burn and copy it.
  In other cases, you can also try to burn media with low speed and not with 24 x.

  But to sentence case you the reader has a malfunction and you need to replace ;(

• New HP HARD drive > load recovery disks > fails to start after the installation process on the press continue

  I have Pavilion d7-4165dx laptop. I saw US, that made a purchase of the United States (BestBuy).

  -HARD drive failed after renewal of antivirus software trial period.

  -All diagnoses would not recognize the HARD drive.

  -Support HP said still in warranty, but I am out of country.  HP said more was likely HARD drive cable.

  -Buy cables and a hand off USA door.

  -Installed, always the same answer.

  -Ordered the new HP's HARD drive.  Out of stock.  Finally inquiring was commissioned to a part 3rd US rep.  He recommended to buy directly from output, but higher speed.  Did this and then HP replacement HARD drive arrives.  Both outside the U.S. door hand.

  -Install the fastest (slightly smaller) Seagate 500G 7200.  Has started the recovery with discs of recovery (5 in total who received from BestBuy, but not the OEM to the research), but before the new HARD drive is smaller than the original WD 640 G 5400.   Put WD #1 Bay and Seagate in #2.

  -Start the process of disk recovery.  Any resumption of the process of the plant and on the last drive-through, it says do not touch while the PC starts on and outside, etc.  Said so press on continue continue.

  -When the press continue, simply goes to the black screen with "No boot device...". »

  -Run the other options, the same message.

  -Diagnosis of ran.  Drive HARD everything is OK.

  -Called HP support.  It says I have to buy the HP recovery discs.  Those I have (5) is not the right one, there should be only 3!  They are that I got from BestBuy, but look like they were made here when BestBuy configures the PC.

  Suggestions anyone?

  Someone has found the problem for me today...

  "Put WD #1 Bay and Seagate in #2.

  When the directions say eliminates any external devices... it really means remove all devices that can be removed that were added after you bought the computer... including in-house!

• "App: unplug the slave" method

  I tried to use the ' Appslave isconnect "method on a project with a goal of RIO (MyRIO) currently connected and the method completes without error, but it does not cut the target in my project. I tried to play, selecting items in the project window and making even the project window above and active before you make the call without success.

  How this method is intended to be used?  What happens if I multipl target in my project?

  OK - this issue initially came from a position of LAVA and I'll copy paste the answer I posted here even IF not all relevant here in case someone else needs!

  I played a bit more with the feature today and it really seemed that the invoke node called "App: unplug the slave" had to be called in the aim of RT himself to work, as that proposed on the forum of NOR. Then, I tried other tests to see if it is possible to run a VI directly on an RT target (which is located in your project). At first, I thought that it was not possible and that he could not understand until I found this link: http://forums.ni.com/t5/LabVIEW/Loading-and-Running-a-VI-on-a-cRIO-from-a-PC/td-p/796657 . I think that gives you actually your solution by explaining that each target has its own instance of the application (also the search to 'Work with Instances of application', as a 'Concept' in the help file for LV [2014 in my case]). Is the way to acquire (or at least my way because I couldn't directly give the IP address of the RIO) was:

  -App-> Project.ActiveProject->-> [appropriate Index] targets-> Application-> "disconnect from the slave.

  Notes:

  -"Project.ActiveProject" seems to be a scripting (bottom of bue) VI

  -The property node 'Application' is located near the end of the list

  Silently, it disconnects the cRIO and may be able to delete your popup if done shortly after asking the RT to restart. With the same reference App, you can also programmatically launch a VI to the target host (even by pressing the arrow to run with cRIO selected target.) It could certainly be useful for you too if you need delay the restart to stop the pop up. I want to say, deploy your application for CompactRIO with the "Run As Startup" active, then get the reference of the App, and run a simple VI that resets the CompactRIO after a few seconds late. During this time, call the node to invoke 'Disconnect the slave' and your pop up should be gone...

  Let me know if it works for you!

• What happens when two parallel process call the same VI in an FPGA?

  Hi all

  I was wondering, what happens when say two parallel processes call the same Subvi in an FPGA? I think that the FPGA would create two instances of the Subvi, not sure. Any point of view?

  Thank you

  Altras

  I don't know if the FPGA adds any ordinary special, but in LabVIEW rule and in LabVIEW Real-time, a VI by default is not reentrant.  Therefore, a process that is called when it is already in use is blocked and must wait.

  If the VI is reentrant, however, then you have two (or more) for the VI dataspaces, so that each can run independently.

• 513 CAPI2 event; Cryptographic services failed during the processing of the OnIdentity() call in the object of the System Writer

  * Original title: 513 CAPI2 event

  Hello.  We receive an error in the Event Viewer indicating event 513, CAPI2 that contains:

  Cryptographic services failed during the processing of the OnIdentity() call in the System Writer object.
  Details:
  TraverseDir: Impossible to push the subdirectory.

  System error:
  Unspecified error

  Here are the details:

  -
  -
   
    513
    0
    2
    0
    0
    0 x 80000000000000
   
    1039076
   
   
    Application
    KFI - SBS.kfi.local
   
   
  -
    Details: TraverseDir: impossible to push the subdirectory. System error: unspecified error
   
   

  We did most of the procedures here as well as the patch that has not worked since our server is a Windows Server 2008 SP2.  What else can be done so that we can solve the problem of System Writer.  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• An error occurred during the processing of the report. (rsProcessingAborted)

  I get this error in SharePoint 2007.  I used Visual Studio 2005 (compatibility issues) to create a report.  I get this error when I try to run the report in Bus portal for Dynamics GP.  I can see and run in Visual Studio without errors.

  Here is what I get:

  • A mistake has during the processing of the report. (rsProcessingAborted)
    • Cannot create a connection to data source 'RIC_PIName '. (rsErrorOpeningConnection)
      • For more information about this error navigate to the report server on the local server, or enable remote errors

  Hello

  It is not a community forum for issues of Sharepoint.

  Find as appropriate (forum Legacy} on the left side of this page and ask your question on this forum.)

  http://social.technet.Microsoft.com/forums/SharePoint/en-us/home?category=SharePoint

  Don

• Why are there no end process in the Task Manager tab.

  Why are there no end tab process in the Task Manager because it usta be a on windows xp, that makes it eaiser to end a game if you do not want it to start. In addition, some games when you exit out of them sometimes play on words to say (on steam) is currently unavailable. That when I try to log out of steam to get the game to work again, he says "game works must end game before disconnection which is the process you need to put end to which you can't because there is no process tab.

  Hi dontknopass,
  
  a. what game you try to play?
  b. did you a software or hardware changes recently?
  c. normally, you should get a process in the Task Manager tab, end process tab is located at the bottom of the Task Manager window.
  
  Method 1.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42
   
  Method 2.
  Let us see if we can get into safe mode, we can perform a clean boot for troubleshooting.
  Please check if you are facing the same question when working in safe mode.
  Step 1 Mode safe
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2 clean boot
  If you have the tab process end in safe mode you will need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  I have visual studio 2010 with Crystal reports extension add on.  Everything works perfectly in development (Win XP Sp3).  When I create my Web site and try to access a report crystal on my web server (Windows 2003 R2 32 bit) I get the following error:

  Unsupported operation. Cannot open a document processed by the engine of JRC in the C++ stack. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Runtime.InteropServices.COMException: Operation not supported. Cannot open a document processed by the engine of JRC in the C++ stack.

  Source error:

  An unhandled exception is generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception below stack trace.

  Stack trace:

  [COMException (0 x 80041811): no support of operation.] A document processed by the engine of JRC cannot open C++ stack.] CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open (object & DocumentPath, Int32 Options) + 0 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open (object & DocumentPath, Int32 Options) CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened (+ 95 + 270) [CrystalReportsException: load failed report.] CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened () + 333 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID () + 31 CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport (context RequestContext, Boolean bAddToCacheWhenCreated) + CrystalDecisions.Web.CrystalReportSource.get_ReportDocument () + 201 Reports_POD 438. Page_Load (ByVal sender As Object, ByVal e As EventArgs) + 55 System.Web.UI.Control.OnLoad (EventArgs e) + 91 System.Web.UI.Control.LoadRecursive () + 74 System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) + 2207

  I installed CR2008, 2011, etc. nothing works.
  I've looked everywhere for a solution to this error.
  If anyone has a solution please post.  It would be much appreciated!

  Thank you

  WS

  Salvation Will Stoner,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the MSDN Windows Server forum.

  http://social.msdn.Microsoft.com/forums/en/vsreportcontrols/threads

• Is there possible to see which are the background running processes in the system which is having Windows XP as operating system?

  Is there possible to see which are the background running processes in the system which is having Windows XP as operating system?

  There is no resource manager (or resource monitor) in the XP Task Manager.

  Please read these notes I send to the people who are (sometimes) concerned about the svchost.exe process number they see on their system or when it looks like one of their svchost.exe process has run amok.  We can not all apply to your situation, but I don't want to type in a bunch of stuff once again.  Then get Process Explorer and you will be able to be Omniscient:

  To help understand your processes svchost.exe and what is running under them, read this article and you will be smarter than the average bear:
  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  You may be able to get clues with what is happening with your svchost.exe process using the Task Manager and maybe understand.

  You will always be able to understand what is happening with your svchost.exe process if you use Process Explorer.

  Download Process Explorer, so you can see what is 'really' running on your system, especially behind those svchosts several process see you in the running task manager.

  Download Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  You'll like Process Explorer when you get the hang of it.  Process Explorer is the Manager of Windows taskbar on steroids.

  Process Explorer installs nothing so it won't slow down your system since it works only on request.

  Process Explorer can seem a little intimidating at first because it has so much information, but you will begin to make love the way it works when you're looking for performance problems.   You can even say EP you want it to be your new default 'Task Manager' value in the future.  You can always run the original tasks as Manager.

  Once you get Process Explorer running, expand the columns, made drag the corners of the screen for it's largest, etc., so you can see as much information as possible in the window.  Now you can really see what is running on the system.

  Here's a screenshot of my poor system when I use Process Explorer:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

  The CPU column is usually the most interesting start with performance issues - which uses the most?

  It is OK and normal to have several svchost exe processes running.  Important XP Services are actually running under svchost.exe processes. There are sometimes an XP Service that runs under a svchost.exe process, sometimes there are several Services in XP, which runs under a svchost.exe process.

  Sometimes malware will hide behind a svchost.exe process because the malware knows that you won't be able to find it in the Task Manager.  He will hide behind a svchost.exe process to deceive you, but you can outsmart it.

  Malicious software can disguise itself also seems to be a legitimate process of XP or he could hide under/behind other processes that you see running in Task Manager if you can't see the execution.

  The malware would trick you into thinking you must use a System Restore Point, run a repair install or reinstall your XP from scratch when you really don't.

  Looking at the display in process Explorer, you want the CPU most to be associated with the system idle process.  It's 'free time' on your system, so more time there, more free.

  If you look at the graphs of performance and see red spikes (or not) double click the graphic in the upper left corner to display the graph to use.  Move the mouse over any pics to see what are the causes.  Even if the Spike has already scroll screen, you can still move the mouse over the edge to see what caused.  You can also just wait for a pic to happen and then see what caused the Spike.