Product key valid not recognized during installation.

Similar Questions

• My 25 character product key is not recognized, as well as the mass storage controller is missing.

  two problems RY5U870-ImageSensor06 not recognized as mass storage controller is not found

  My 25 character product key is not recognized as mass storage controller is missing and a meesage RY5U870_Image Sensor06 is not compatible. I use a computer laptop sony vaio a dell windows vista Home premium 32 - bit boot disk that I got no problem other than the unrecognized product key it for activation of windows has never been made. I hope that I have ave explained it well enough for someone to solve these issues. Dale a lot thanks

  The question of activation is because you cannot use a Dell OEM of Windows version to activate on a Sony.

  The questions ImageSensor and mass storage controller are likely due to the fact that the Dell installation media is not the device driver appropriate for your Sony computer motherboard.

  J W Stuart: http://www.pagestart.com

• my product key is not recognized. Please notify.

  my product key is not recognized. Please notify.

  Please tell us which product is the key.

  see this:
  http://support.Microsoft.com/kb/555375

• Foreign key constraint, not recognized during the synchronization of data with the model dictionary

  Hello

  Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.

  I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?

  Thank you

  Robert

  Hi Robert,.

  Thanks for the comments, I logged a bug.

  Philippe

• Failure of Windows 8 install, now the Windows 7 product key is not recognized, because it was an upgrade only.

  After several attempts of downloaded installation windows 8, I ended up with a useless and made desktop resettlement using my windows disc 7. Now, the product key for my windows 7 is recognized as a key to upgrade only and does not have to satisfy to MPA.  Where is my satisfaction? I have 30 days to resolve. Either I need a key for my 7, or a facility for my 8. Everything on my end, that I could find online tried. I think this is a Microsoft problem and the solution must come from them.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• I am trying to reinstall windows XP and my product key is not recognized - I tried predoct re registration and also start/programs/tools / register

  I am trying to record the product key I PAID for the code and it is not recognized.

  Pls help.

  Hello

  · Were there any material changes made to the computer?

  I suggest you try the steps from the link: you receive an error message after you enter the product key when you try to install Windows XP: http://support.microsoft.com/kb/310637

• LaserJet Pro P1102w installation problems - USB not recognized during installation

  Struggling to configure the P1102w - using the installation DVD that accompanies it, I go through the steps. When I get to ' turn on the printer, connect the USB cable to the computer ' the printer is not recognized. Is not dismiss it, he just can't get it - it is with Windows 8.1.

  Tried it on another laptop running Windows 7 - same problem. The installer sat on the market "in waiting to connect to the printer via the USB port.  When you connect, Windows recognizes a USB device and tried to install the device - came with an error that could not be recognized and need to contact the manufacturer for the installation files.

  Update Windows, computer rebooted several times, deleted the HP installation files and tried with drivers downloaded from HP website - same problem.

  Any ideas?

  I had the same problem when working on a clients computer.

  (1) it has been infected by viruses, so we had to make a Virus removal on his computer.

  So you want to make sure that your computer is virus-free

  (2) in most Windows 8 HP computers in particular, drivers automatically installs on the computer.

  Check your device manager and click on printers. It will show what is connected.

  On my computer it shows printers >

  HP P1102W

  I had to uninstall it, to install the software. Once I did that the computer was able to recognize the USB cable.

• HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102

  I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '.  I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem

  Hi @Janemaguire,

  Have you tried another USB cable?

  Because the printer is not detected on the Mac, it may be the USB port of the printer.

  What happened when you tried to install the printer on Mac?

  Error messages?

  What is the model Laserjet P1102w?

  Let me know. Thank you.

• hard drive is not recognized during installation of window

  Hi all

  I recently had some problems with my computer so I decided to erase and install a new OS on it. Initially I had window on my main hard drive, but that is old and broken so I who throw in the trash, and my secondary hard drive (Seagate Barracuda 7200.12) now will be my main for this installation of Windows vista x 64.
  Problem: when I get to the part in order to select the player for window to install on, window does not show that the disc is read, and the driver must be installed.
  I've never had this problem before. so I went into the bios when booting and bios, I see this window is grateful for my hard drive, but for some reason, it does not show when I do installation...
  Help, please...
  Thanks in advance

  Hi tuanhuynh,

  It seems that the Serial ATA driver could not be installed on your computer.

  See the following link and install the Serial ATA driver.

  Install or remove a hard drive

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=200991

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=212667&NewLang=en

  If you have trouble with the Serial ATA driver installation then I suggest you to contact the manufacturer of the system for further assistance.

• HARD drive is not recognized during installation of Windows XP on Qosmio F30 - 140

  Dear alls,

  I'm trying to install winxp on my Qosmio F30-140, but when I boot from the CD and after Setup starts, it shows me a massage like this:
  "windows has not found any HARD drive. Please make sure that you have an and it's probably work and connection very well... blah blah blah... »

  What should I do to install my OS?

  Thank you

  Hello

  your machine has a RAID controller, so before installing windows, you must install the RAID controller before. This occurs after you´ve began installing XP. Then a message on the bottom of the screen will appear that tells you that you must press F6 if you install HARD drive controllers (or something that way).
  You need to install the RAID driver from a USB floppy drive, which can be downloaded here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  After you have installed the driver for your drive HARD will be displayed, and you would be able to install XP.

  Check this thread for more information:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24582&MessageID=94387

  See you soon

• I get a message that my product key is not valid during the installation of Windows.

  want to reinstall windows, invalid key product, have officex, all the info too complicated for a novice

  I bought a dell latitude d620 xp and it freezes all the time, charge for centuries, has error on the alltime page and readajusts itself, please help, I want to reinstall windows and the product key is not valid, what do I do.

  Hello
  If you are still having this problem, here are some steps to try:

  http://support.Microsoft.com/kb/310637

  Hope this helps,
  B Eddie

• Error input installation product key is not valid

  Original title:  Product key problem

  I reinstall Windows XP (got a new hard drive) and when I enter the product key for the packaging, I get an error message that I entered the product key is not valid.  I made 3 times - I entered correctly all 3 times.  What can I do?

  Hi Wade_1217,

  1. Where did you buy the Windows XP installation CD?
  2. You have formatted the hard drive before reinstalling XP on the computer?
  3. What is the full error message that you receive?

  Refer to the article below and try the steps mentioned, check if it helps.

  You receive an error message after you enter the product key when you try to install Windows XP

  http://support.Microsoft.com/kb/310637

• Windows XP, the installation program tells me that my product key is not valid.

  XP product key issue

  Hello, I wiped recently my HD - Ive saved the files I need and reformatted, however when I just reinstalled Windows XP, the installation program tells me my product key is not valid. I know it's the product key correctly that I recorded the original in the body of my PC - no clue please Clive * address email is removed from the privacy *

  Hello

  Follow the steps from the link and check if it helps: you receive an error message after you enter the product key when you try to install Windows XP: http://support.microsoft.com/kb/310637

• Message that my Windows XP Home Edition product key is not valid

  My hardrive was getting full so I saved and used DBAN to wipe my hardrive. Once I did and went to install my VALID copy of windows XP when is invited to enter my product key (which is located on a certificate of authtensiy stick on the side of my Tower) keeps telling me my product key is not valid. I use the service pack of windows XP Home edition CD came with my computer and it still does not telling me that the product key is not valid.

  How to remedy?

  Activate Windows XP by using a Modem, Internet or phone customer Service

  http://support.Microsoft.com/kb/307890

  The installer stops and restarts in Windows XP several times

  http://support.Microsoft.com/kb/811150

  You are able to boot mode safe?

  If so, open the command prompt window and type chkdsk /F /R

  Press enter

  You will see a message about the volume must be locked.  You want to monitor during the recovery?

  Press y and press enter

  Reset

  The scan will take a few moments, but he'll fix files

  You could try to test disc hard failure - should not continue loading XP installation

  Test the hard drive by using the CHIP (HP support Document)

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00386164&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN