Profile of Studio "JeOS CentOS Linux 5.5 [Template]."

Similar Questions

• Satellite A300 and Centos Linux - EHCI: transfer of the BIOS didn't 01010001

  Hello

  I have a laptop Toshiba A300 - 211 PSAGCE.
  It has 32-bit Vista as the operating system.

  Now, it is dual bootable Centos linux with Vista and it does not start in Centos, displaying the message "EHCI: transfer of the BIOS has not (bug BIOS?). 01010001 "and it restarts automatically, without any statement by me. "Reboot" again and again.

  The same problem appears when loading windows 7 or windows 8. With windows vista, only it doesn't have problem. The only problem with Vista is that Skype does not recognize my toshiba webcam.

  My bios version is 2.2, and unfortunately, the TOSHIBA support site does not support the model of mylaptop with another more recent version of the bios. I tried to load the new version of the bios of other Toshiba A300 model, but my phone does not support the flash BIOS.

  Please help me! It is very important for my work to solve this problem.

  I wait anxiously for any help or idea or a new version of the BIOS.

  Kind regards

  Please give me a solution as soon as possible because I can't work!

  Thank you very much.

• EBS for centos linux

  Hi hussein.
  
  EBS is certified for CENTOS Linux?
  
  
  Thank you

  EBS is certified for CENTOS Linux?

  N °

  Please refer to the matrix Certification of MOS Web site for a list of supported OS.

  In addition, see the installation documentation, you should find a list of the Linux OS, supported it.

  Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]
  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]
  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]

  Thank you
  Hussein

• NI-VISA 5.1.2 outputs/farm right after launching it on CentOS Linux 6.2 PC, also blocks LabVIEW trying to create VISA constant REF for VISA Open.

  After installing 2011 LaBVIEW and NI-VISA 5.1.2 on CentOS 6.2 PC, I noticed a problem trying to use the LabVIEW vi VISA, basically it does not work for me, LabVIEW crashed when trying to create a control, or a constant for the open VISA vi.  Tried to launch VISA tools, they all start and then close abruptly.  Trace IO OR only shows a single line.

  I read however number of threads and decided to collect the system.log NOR, which is attached. (system.log.gz). I noticed a strange message here on nivisaserver:

  / usr/bin/tail - lines = 25 var:

  22 May 11:18:48 abrtd localhost: 'nivisaserver' Package is not signed with the appropriate key

  22 May 11:18:48 abrtd localhost: corrupt or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (Re: 2), deleting

  Thank you!

  MountainMan12 wrote:

  After installing 2011 LaBVIEW and NI-VISA 5.1.2 on CentOS 6.2 PC, I noticed a problem trying to use the LabVIEW vi VISA, basically it does not work for me, LabVIEW crashed when trying to create a control, or a constant for the open VISA vi.  Tried to launch VISA tools, they all start and then close abruptly.  Trace IO OR only shows a single line.

  I read however number of threads and decided to collect the system.log NOR, which is attached. (system.log.gz). I noticed a strange message here on nivisaserver:

  / usr/bin/tail - lines = 25 var:

  22 May 11:18:48 abrtd localhost: 'nivisaserver' Package is not signed with the appropriate key

  22 May 11:18:48 abrtd localhost: corrupt or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (Re: 2), deleting

  Salvation mountain,

  Thanks to attach the report system log - I think I have a solution for you :-) Let's look at some of the lines:

  890: / proc/meminfo:
  
  891: MemTotal:        kB 3894712
  
  1726: / proc/iomem:
  
  ...
  
  1784: 100000000-12dffffff: System RAM
  
  
  1807: / bin/dmesg:
  ...
  1820: RAM BIOS fitness card: 2576: [nipple] more than 4 GB of memory addressable detected.
  ...
  1838: BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
  ...
  2576: [nipple] more than 4 GB of memory addressable detected.
  2577: [nipple] this configuration is not supported.  Check the release notes for more information.

  Starting at the bottom to 2576.2577, dmesg lines had more than just the NI-VISA signature notification server. To start the system, the kernel modules OR refused to load because they detected more than 4 GB of memory addressable. But, if you look upward to the 890.891 lines, meminfo says that you have less than 4 GB of memory system, which makes it appear as modules OR don't know what they are talking about. However, if you look at the report of iomem down on lines 1726.1784, system RAM was relocated above the 4 GB limit. While your system has no more than 4 GB of RAM, part of his memory addresses beyond 4 GB, which can not use modules OR and so they refuse to load. -What happened? Your BIOS has provided a physical map of the RAM with usable over the threshold (line 1838) addresses.

  The difficulty here is simple: you must specify the kernel to reserve addresses beyond 4 GB [1] so that it won't remap RAM into a memory. Once all the RAM addresses below 4 GB, the modules must load and VISA/LabVIEW/al. should stop bad conduct.

  It seems to me that LabVIEW does not handle this situation very gracefully, and maybe you can work with Kira to file a bug report.

  [1] re: success SUSE linux and DAQmx installation; nilsdev and other missing utilities.

  http://forums.NI.com/T5/Multifunction-DAQ/successful-SUSE-Linux-and-DAQmx-install-nilsdev-and-other/...

• CentOS Linux in Production Oracle environment

  Hello Sir,

  I get the comment below from oracle...

  None of the versions of Oracle DB and editions are certified to run on CentOS. It does not mean that technically it won't work, but it is not officially certified by Oracle. This means that if there is a problem due to this combination of operating system and Oracle DB, Oracle support is not available for this combination.

  So I can install Oracle DB production on linux CentOS? or if you have an appointment with readhat?

  
  

  Kind regards

  Ahmed.
  

  I would say that... is preferred for the installation of Oracle db.

  Made by oracle for oracle.

  And as John Stegeman showed free to use.

  Kind regards

  --

  Bertrand

• Oracle 12 c in CentOS Linux 7

  I put the Oracle database in Linux CentOS 7 computer. I create use as oracle with a band called oinstall.

  I can connect to the Linux system using name - oracle, but I couldn't find this user when I open system 'users and groups '. Is that what this user (oracle) specific?

  I use Desktop Environment - Mate with package Mozo - fork of Gnome alacarte and using yumex as practical utility for the maintenance updates and other services of the operating system.

  But I have some problems like this only under user oracle:

  oracle@centos7 ~]$ mozo
Traceback (most recent call last):
  File "/usr/bin/mozo", line 36, in <module>
    main()
  File "/usr/bin/mozo", line 32, in main
    app = MainWindow(datadir, version, sys.argv)
  File "/usr/lib/python2.7/site-packages/Mozo/MainWindow.py", line 48, in __init__
    self.editor = MenuEditor()
  File "/usr/lib/python2.7/site-packages/Mozo/MenuEditor.py", line 36, in __init__
    self.__loadMenus()
  File "/usr/lib/python2.7/site-packages/Mozo/MenuEditor.py", line 46, in __loadMenus
    self.applications.dom = xml.dom.minidom.parseString(util.getUserMenuXml(self.applications.tree))
  File "/usr/lib64/python2.7/xml/dom/minidom.py", line 1930, in parseString
    from xml.dom import expatbuilder
  File "/usr/lib64/python2.7/xml/dom/expatbuilder.py", line 32, in <module>
    from xml.parsers import expat
  File "/usr/lib64/python2.7/xml/parsers/expat.py", line 4, in <module>
    from pyexpat import *
ImportError: /usr/lib64/python2.7/lib-dynload/pyexpat.so: undefined symbol: XML_SetHashSalt
[oracle@centos7 ~]$ yumex
Traceback (most recent call last):
  File "/usr/bin/yumex", line 25, in <module>
    from yumexgui import YumexApplication
  File "/usr/lib/python2.7/site-packages/yumexgui/__init__.py", line 34, in <module>
    from yumexgui.gui import Notebook, PackageInfo, CompletedEntry, StatusIcon
  File "/usr/lib/python2.7/site-packages/yumexgui/gui.py", line 32, in <module>
    from yumexbase.constants import *
  File "/usr/lib/python2.7/site-packages/yumexbase/constants.py", line 35, in <module>
    from yum.constants import *
  File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 96, in <module>
    from yum.drpm import DeltaInfo, DeltaPackage
  File "/usr/lib/python2.7/site-packages/yum/drpm.py", line 27, in <module>
    from xml.etree.cElementTree import iterparse
  File "/usr/lib64/python2.7/xml/etree/cElementTree.py", line 3, in <module>
    from _elementtree import *
ImportError: PyCapsule_Import could not import module "pyexpat"
[oracle@centos7 ~]$

  I made it: useradd -u 501 -g oinstall -G dba,oper oracle


  You can source the oraenv file to configure the environment for you. See Oraenv - Oracle FAQ.

  I prefer to use the .bash_profile to explicitly set:

  ORACLE_BASE
  ORACLE_HOME

  Path (including the $ORACLE_HOME/bin)

  I also use rlwrap - must be manually create and install on Oracle's Linux (download the source and make a config, all makeand install). And then add aliases entries to my .bash_profile, for example:

  alias sqlplus = "' rlwrap $ORACLE_HOME/bin/sqlplus '"

  RMAN alias = "" rlwrap $ORACLE_HOME/bin/rman ""

  Note that to compile and generate rlwrap, a couple of RPMs of development must be installed via yum (using Yum Public Oracle filing) - such as readline lib dev and so on.

• Could not connect to Server-CentOS linux virtual desktop of Windows 8 client

  Unable to connect to the virtual office CentOS 6 using vWorkspace.

  Implementation error "could not connect to the server.

  XRDP installed correctly as I can successfully RDP using RDP client from a Windows 8 client.

  Forest licences on the broker for connections,

  0 NCSDSK01. LABORATORY. REDARMOUR.CO.UK10.20.1.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%systemroot%\explorer.exe1011121

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - # message collection accepted...

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - heartbeat: NCSDSK01.lab.redarmour.co.uk (10.20.1.181)

  2013-09-23 22:33:10.510 - 748 - 11032 - broker - DEBUG - CDbManager: Re-use of conn = 0x053f2510 (50)

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - get the status of the remote computer.

  2013-09-23 22:33:10.526 - conn - broker - DEBUG - CDbManager:keeping 748-11032 = 0x053f2510 (50, lastCount = 49)

  2013-09-23 22:33:10.526 - 748 - 11032 - broker - INFO - CDbManager:connection held 17 ms

  2013-09-23 22:33:10.526-748 11032 - broker - INFO - # message Finished collection (MS = 17)

  2013-09-23 22:33:11.509-748 11032 - broker - INFO - # message collection accepted...

  DNS resolves the virtual machine very well and the broker for connections indicates that the virtual computer is off and online. The installed Virtual Office Extensions and service that runs successfully.

  CentOS VM is joined to the domain active directory.

  Watch it records all service broker of successful connection messages

  Any idea?

  This question is not met at the time of the request.

• CentOS Linux VMware Tools cannot cancel install cannot vMotion

  I'm running CentOS 6.5 and have successfully installed vmtools. I need vmotion my servers, but I get the error "VM is to install VMware Tools and cannot launch a migration operation.

  I already did the "vim - cmd vmsvc/tools.cancelinstall < idnum >" command, but still cannot vmotion.

  I tried to re-mounting/remove the cdrom and unplugging the CD, but not luck.

  Don't know what to try next. Ideas?

  ESXi 5.5, vm version vmx-10, the tools are present and running.

  Thank you

  Mike

  Had this problem several times. Only way I got it to work was to turn off the virtual machine and power it back on.

  Tim

• Misfortunes of OBIEE on CentOS Linux installation with the application server

  So I'm under CentOS 5 with 10 gr 2 10.2.0.4 and Oracle application server 10.1.3.1. The application server seems to be running, that I can open an Informatica repository and access server: 7777 / em and do some configurations.
  
  I installed OBIEE and BI and presentation servers claim to have started (log files not referenced the .sh scripts show no error)
  
  However, when I open the url http://server/analytics, I get a page not found error. According to the section application of MBeans, the RPC port is 9703. When I go to http://server:9703 / analytical, the screen just hangs, until I hit Cancel on my browser. When I hit Cancel, the file NQServer.log shows
  
  [nQSError: 12002] Error in communication on the socket call = send: (number = 9) bad file descriptor
  
  Any advice on what to watch next? I feel that I'm missing something really simple
  
  Thank you
  James

  You can also try to deploy the EAR of WAR files / yourself, they are copied by Setup OBIEE under ./OracleBI/web /.

• Server and the agent must be running as root (under centos linux)?

  I have not seen anything in the installation documentation that mentions that it is advisable to run the Actual process and agent as root.  I noticed that, when is not running as root, the agent was unable to analyze certain directories, which seems a bit undesirable.
  
  My plan was to create a simple script to call HQ - agent.sh power in /etc/init.d (for example) and then use symbolic links to standards in /etc/rc3.d to start and stop the agents and the server automatically.
  
  Is this normal practice?  A bad idea?
  
  Thanks for any advice.
  Jay

  As you have noted, there are many parts of the system that require privileges to access and monitor. The simplest solution seems to be to use the root user to run the agent, although more complex solutions using a properly assigned permissions, sudo for specific orders, or him are more synchronized with security best practices. I have personally not yet explored all the possibilities, but know has endeavoured to ensure the process is running as root is not a hard requirement.

  A start/stop script looks like a very good idea. All right, in fact, you should find an example called agent.rc in the hyperic-agent-2.x.x/rcfiles directory. A point of departure in any way.

• CentOS DPPA deployment fails with "Waiting for customization comments... appd.properties. »

  I have installation vCAC 6.0.1 with vCloud Application Director 6.0.1.  For some reason, I can't get my test CentOS VM deployment using DPPA (installation program to add Apache as a package).

  That's what I see on DPPA (/home/darwin/tcserver/darwin/logs/catalina.out):-

  4 March 2014 20:39:24.184 INFO [http-bio-8443-exec-7] [[email protected]] com.vmware.darwin.web.service.policy.ComplianceTaskController - compliance to find stains by the task of deployment including the id = 8.

  4 March 2014 20:39:24.296 INFO [http-bio-8443-exec-2] [[email protected]] com.vmware.darwin.web.service.deployment.DeploymentTaskController - Get aggregated status of phases for deploymentTask.  ID = 8

  4 March 2014 20:39:24.297 INFO [http-bio-8443-exec-2] [[email protected]] com.vmware.darwin.service.deployment.DeploymentTaskServiceImpl - Get the State consolidated for deploymentTaskId = 8.

  4 March 2014 20:39:25.152 INFO [http-bio-8443-exec-2] [[email protected]] com.vmware.darwin.web.service.deployment.DeploymentController - model overlay.  deploymentTaskId = 8

  4 March 2014 20:39:30.363 [cal-pool-1] [SYSTEM INFO] com.vmware.darwin.cal.driver.vcac6_0.delegate. WAPIClientDelegate - find VM with uri = "vcac://e8503f26-0636-46e2-8bc6-c29033224b00/cb8bcc96-4a3a-4160-ba5c-bc20647612e3".

  4 March 2014 20:39:31.907 INFO [cal-pool-1] [SYSTEM] com.vmware.darwin.cal.driver.vcac6_0.WaitForInstanceState - VM = "CentOS-YGBT6N7C' found status ="CustomizeOS. "

  4 March 2014 20:39:41.908 [cal-pool-2] [SYSTEM INFO] com.vmware.darwin.cal.driver.vcac6_0.delegate. WAPIClientDelegate - find VM with uri = "vcac://e8503f26-0636-46e2-8bc6-c29033224b00/cb8bcc96-4a3a-4160-ba5c-bc20647612e3".

  4 March 2014 20:39:43.194 INFO [cal-pool-2] [SYSTEM] com.vmware.darwin.cal.driver.vcac6_0.WaitForInstanceState - VM = "CentOS-YGBT6N7C' found status ="CustomizeOS. "

  And this is what I see on the VM itself once it has started and got IP addresses etc (/opt/vmware-appdirector/agent/logs/agent_bootstrap.log):-

  Kills 4 20 Mar: 41:23 GMT expected 2014 appd.properties customization of comments...

  Kills 4 20 Mar: 41:23 GMT WAIT_COUNTER 2014 is 250, WAIT_LIMIT 600

  Kill Mar 4 sleep 2014 20:41:23 GMT 10

  Kills 4 20 Mar: 41:33 GMT expected 2014 appd.properties customization of comments...

  Kills 4 20 Mar: 41:33 GMT WAIT_COUNTER 2014 is 260, WAIT_LIMIT 600

  Kill Mar 4 sleep 2014 20:41:33 GMT 10

  Kills 4 20 Mar: 41:43 GMT expected 2014 appd.properties customization of comments...

  Kills 4 20 Mar: 41:43 GMT WAIT_COUNTER 2014 is 270, WAIT_LIMIT 600

  Kill Mar 4 sleep 2014 20:41:43 GMT 10

  I followed all the different instructions on how to install the comments and agents "bootstrap" on the model of virtual machine, but he is not happy.  I do not see any file of appd.properties anywhere on the virtual computer.  It is a laboratory set up so all devices / servers run self-signed certificates.  I even downloaded the cert in the VM model in accordance with article http://www.vmtocloud.com/how-to-create-a-vcac-6-linux-guest-agent-template/

  What on earth am I doing wrong?

  See you soon

  Danny

  Finally found the problem, I had configured my network with wrong DNS server profiles and no DNS search suffixes.  Once I fixed that, everything worked.  The strange thing is that, even on these kicks VMs who had failed to deploy, I could solve the vCAC, ID, IaaS and DPPA servers.

  Moral of the story is ALWAYS CHECK DNS!

• How can I place the bookmarks from a Linux installation on partition commune/home for various Linux distributions on separate partitions for access?

  17 Firefox under Linux with Linux installations on separate partitions, with a repertoire common/home its "own partition.

  I would like the json files to appear only on the / Home partition and each instance of Firefox to read and write files json here only

  Hello

  One way would be to start the Firefox Profile Manager in each Linux instance and that it points to a profile of another Firefox installation folder, preferably one that has been customized in a satisfactory manner. You can then delete the profile by default in every Linux installation.

  Profiles Howto

  Profiles of school boards

  Files & profile folder

• Failure to build LabVIEW application on Linux using "Shared library".

  In order to create a LabVIEW application on linux without X display, I have respected the LabVIEW VI using the shared library for Linux. I did it by clicking with the right button on construction Specifications and selecting New > Shared Library, and in the section Advanced , check the box labeled embedded version using the runtime engine. At the end of the build process, a message to inform that the build failed with the following message:

  "Error 127 to the Exec System: sh: gcc: command not found".

  The error code is not set. No one has provided a description for this code, or you could have wired a number which is not an admission of error code error code. »

  I have had no compling the LabVIEW VI in normal mode, so am confused about which is the problem.

  Hi Julian,.

  GCC is a compiler C and C++ under Linux.  A simple way to check if it is installed is to open a terminal and type 'gcc', if the command is recognized then the package is already installed, and the problem must lie elsewhere.  If this slot of Linux has a package manager, then it must be posted in here also.  If not then it could point to him being not installed or missing a dependency makes not accessible from the command line.  Here is a link that should hopefully scroll you through installation of gcc with Redhat: http://www.cyberciti.biz/faq/centos-linux-install-gcc-c-c-compiler/ .

• vWorkspace Linux VDI

  Hello

  Its a little complicated setup, but I'm working on creating a 50 virtual Linux desktops for a class of college on Hyper-V. I created the computer group (new computer group > other/physical) where I placed the CentOS linux. These machines are 6.6 CentOS, I installed xRDP and I use the VDE 7.7. All work of CDS as expected, but my question is is it possible to suspend the machines if they are not used to conserve resources because under this type of group properties 'Energy savings' is grayed out? It seems that energy savings are enabled only for Windows computers group. Is it possible to generate scripts suspend the virtual machine, until someone is trying to access?

  I have 2 servers three gateways Hyper V, 2 x connection brokers, x RDP.

  Hello

  You should be able to create the Group of Linux as a desktop computer HyperV group rather than an 'other/physical', this should allow you to then define energy savings.

  Let us know if it works?

  Thank you

  Sam

• running centOs 6.3 KVM under esxi 5.1

  Hi all

  I try to run CentOs Linux with KVM under esxi 5.1, is this possible?

  I'm trying to load kvm_intel, but I have error.

  Thank you

  Lucas

  You may need your VM upgraded to Virtual Hardware 9 in order to have the ungreyed checkbox.

  Power off the virtual machine, right-click on the virtual machine and choose upgrade virtual hardware. Who's going to format virtual material 9.

  Then use the web client to check the box for "expose hardware assisted virtualization to the o/s.

  Datto