vWorkspace Linux VDI

Similar Questions

• vWorkspace 8 - VDI Windows 7 "Error cannot connect to the server '.

  Hello

  We are soon about to begin the deployment of our vWorkspace VDI solution. We have Windows 7 Client s connection to Win 7 Pro 32 Bit VM on Hyper-V.

  Sometimes when the user intiates a connection to the desktop of Windows 7 VDI published the vWorkspace Client launch and are trying to connect, and then an error will be presented "Error cannot connect to the server. We do not understand all the time and it is random.

  Go it is addressed urgently as it's going to cause some major headaches with our users.

  Someone at - it ideas?

  Cool, thanks Dan.

  I'll find the case of Mike and send the info from there.

• Windows Mobile Device Center does not not with vWorkspace

  That we conduct vWorkspace 8.6 on the connector of Ubuntu.  Our VDI is Windows 7 Pro.

  USB redirection works because I can plug my USB and it it will redirect to the VDI and I can see my files.  When I anchor a MC1000 it will show as "Symbol USB Sync" in the devices section not specified in devices and printers.  When I open WMDC he is not recognized and does not connect to the device.  I also tried a MC9190 and have the same result.

  Has anyone tried this before with positive results?

  Hello

  In the Linux connector it is an Auto-Share checkbox, make sure that you enable this option and it will recognize the USB inside VDI VM HR.

  I use the same method, but with purely custom Linux VDI endpoint devices. Enabling the option to Auto-Share it recognizes the USB with no problems.

  Kind regards

  Hussain

• MIB (SNMP) library as vWorkspace 8.5 and 8.0 MR1

  Hi all

  I'm looking for MIB library to monitor a vWorkspace Envrionement 8.5 and 8.0 MR1 with PRTG monitoring software.

  I already searched inside a foglight installation, but this very difficult, causing thousands of MIB

  Are there recommendations or with the case of information (MIB) files.

  If you have any questions, don't hesitate to contact me

  Kind regards

  Thomas

  Hi Thomas,

  We do not have the MIB files specifically for vWorkspace environments because I believe that we do not support SNMP.

  What exactly you were trying to monitor? The built-in Diagnostics monitoring vWorkspace & who uses WinRM (or WMI) should give you everything you need to monitor your environment vWorkspace. He oversees infrastructure vWorkspace (hypervisors, VDI VMs, RDSH and from 8.6 RDL and WSM), user session and applications performance and also allows you to establish a correlation between the performance of the system with the user sessions and the ecosystem integer vWorkspace.

  If you only want to use PRTG monitoring, I don't know how it works unfortunately. Do Paessler / PRTG have best practices on how to integrate with existing management platforms (other than SNMP MIB files)?

  Thank you

  Sam

• Connecting to Linux Desktop

  Hello

  I just got manual office pool of Linux upward and running based on the documentation provided and the youtube video that was posted a few weeks back. I'm under RHEL 6.6 with the last installed display software.

  Initially, I connected via a browser web to the Linux desktop pool and able to connect without any problems.  My only complaint is that the office is not resized to the current size of the browser.  The current maximum resolution is 1280 x 768.

  I also tried to connect from a Client display Windows and zero Tera2 customer but without success.  The error message I get is "this office does not support the requested protocol display.

  Any help is very appreciated.

  Found the problem.  My http load balancer has been playing with the traffic between the client and the Linux host.  With the removed load balancing, I am able to connect to desktop Linux.

  The new Linux VDI Protocol is therefore essentially VNC through websockets?  As this would explain why the load balancer is of no relevance since I set it up for websockets proxy traffic.

  With the connection problem now "solved" (I wish I had the web load balancing and proxy in place), I now see a Linux desktop, but it has a maximum resolution of 1280 x 768.  Is there an option where I can get a higher resolution fullscreen?  If I run a VNC server session I can adjust the resolution to something that is greater than what is available in my Office VDI session.

• vWorkspace 8.0.1 Linux deployment

  Hello

  I am trying to create 20-30 CentOS VM on the farm VDI vWorkspace for CS students do an apprenticeship on CentOS. I have trouble finding instructions on how to do it. I found some instructions on the link below for VDE, but I'm unable to configure Linux and I can deploy it via connector vWorkspace to our students. For example in the guide below his allusion to some prep vwts scripts that I ache to locate. No idea if there are How - to's on how to successfully deploy Linux?

  Note: Students need not GUI/desktop experience in CentOS, they are OK with power of SSH for virtual machines.

  Link: http://us-downloads.quest.com/Repository/support.quest.com/vWorkspace/8.0.1/Documentation/vWorkspace%20Virtual%20Desktop%20Extensions/7.7/vWorkspace_VirtualDesktopExtensionsForLinux_7.7_AdminGuide.pdf

  Hello

  The VDE 7.7 you downloaded on your machine model? You can download here:

  https://support.software.Dell.com/download-install-detail/5075773?prodjid=1-7GCB8-423

  In this download is a file called VDEFORLINUX\Provisioning

  Choose the folder for CentOs, 'EL', in here will be the vwts script you need.

  Which version of CentOS you try to deploy? We currently support only 5.9 and 6.4 but supoprt 6.5 will be available soon.

  I hope this helps!

  Thanks, Sam

• Problem with linux vWorkspace

  Hola
  
  Currently I have 1 server with IIS for Gateway , 2 Server for Brokers vWorkspace and 1 Server RDS
  
  By using vWorkspace connector from Windows I have no problem to connect to VMs or applications ( notepad for example). But since Linux only connection works VMs , applications show error "Failed TCP Connection "
  
  also I have a Dell Wyse SUSE 5010 and the same thing happens to me .
  
  Everything is mounted on Vmware
  
  What could be the problem?
  
  Thank you!
  

  NLA is enabled on the server RDSH?

• Time to slow logon for Vworkspace VDi

  Hi team,

  I have installation of Vworkspace 8.0MR1 and currenlty have WIn7 32 Bit Image master. I have pool VDi 100 cloud.

  I am facing logn slow time. each user takes almost 90 to 120 seconds to open a session.

  I also disblaed NLA in Master image/Hyper-2012R2 host. Is everyone to the same kind of issue.please share the findings.

  Delighted thanks.

  It is a known issue with 8.0MR1.

  There is a fix that resolves this problem, support can help you determine which fix applies to your installation.

• vWorkspace VDI

  Hello

  I'm currently setting up a VDI solution and using vWorkspace as the broker for connections.   Did anyone seen any good technical document that can give me some advice and maybe to bypass some of the traps

  Any help would be great

  Thank you, John

  Hi John,.

  You can find useful information in the Guide of best practices of vWorkspace, published here http://en.community.dell.com/techcenter/virtualization/vworkspace/m/vworkspace-downloads/20438378

  If you have more specific questions, then post them here and we will do our best to help.

  Thank you

  David

• IEAK error when connect to VDI Desktop in vWorkspace 8

  Hello

  as a previous mistake of kerberos ticket post I do several tests in order to implement vWorkspace 8.

  When I connect to VDI desktop (without kerberos, or with the initial only, not SSO) pops up an error IEAK. Sorry for the attached screenshoot and some descriptions are in Spanish

  The guest operating system is company Win 7 SP1 with the latest patches, active RDP8 and Explorer 9. Guest operating system is Spanish localized.

  

  Detailed description:

  Firma con problemas:

  Number del problema evento: BEX

  Application number: rundll32.exe_iedkcs32.dll

  Application version: 6.1.7600.16385

  Marca of tiempo of the application: 4a5bc637

  Number del modulo con errores: PNMicSrv.dll_unloaded

  Version del modulo con errores: 0.0.0.0

  Tiempo del modulo Marca con errores: 513eb9a9

  Exception offset: 7502d6a1

  Exception code: c0000005

  Exception data: 00000008

  Led operating system version: 6.1.7601.2.1.0.256.4

  ID of regional config: 3082

  Additional information 1: 0a9e

  Additional information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  LEA nuestra declaracion privacy online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0C0A

  I have the same problem. I opened a folder with support and they are studying.

  Meanwhile, I have found a workaround. It seems that the problem is related to pnmicsrv.dll for vworkspace versions superior to 7,6 GA at least the question seemed to us after application of a patch for this version and it reappeared after upgrade to v8. In both cases I solved it replaces the pnmicsrv.dll file in our model with the dll version 7.6 of GA

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• A quick fix for the fix option 336711 for 7.7 vWorkspace Virtual Desktop Extensions for Linux

  I might be the only person who has had this problem, but in case I'm not... Read on.

  This applies to users running the script vwts_ubu.sh in the stages of commissioning.

  Your script will fail on line 402 by saying he had too many arguments. The question lies in the way the script queries the status of the firewall... (essentially the ufw status line returns several lines as column 2... I had to modify the line 402 to add a 'head - n 1' hose to make it work...

  Hello

  Thanks for that - I'll pass it along to our Linux Devs to fix in a future version.

  Andrew.

• VDI Linux CentOS 7.1

  I'm testing 6.2.1 14.04 Ubuntu and Centos 7.1. So far it works great on Ubuntu, but I can't get connected to the Centos session. I wonder if I really need to use RHEL 7.1 instead.

  I tried with centos7.2 and after disabling virtbr0 works well. Please help confirm.

• Sober Aclaraciones VDI

  We have to prepare a project sober vdi, hecho ando y a UN lio poco, me explico.

  El comercial is habia empenado hacerlo con vsphere y por encima xendesktop, pero ha Haddad con el distribuidor y the comenta xendesktop needs a powerful para el run a virtual pc.

  Yo siempre creo that hace falta solo una infrastructura tipo VI3 Ó vSphere, broker United Nations (view, xendesktop o quest el tipo y los thinclients.)

  Esto are asi?

  No are you can hacer con thinclients? Porque según los of citrix, NO.ellos our dicen as XenApp, Xendesktop utilizemos're para casos muy concretos of Quebec.

  Yo quiero what are pc office users para crear y ellos ahead solo tengan a tonto terminal.

  VOY evil? I am wrong, please, a worm TR veo mas luz.

  Gracias.

  VCP 310

  UNA powerful para el run a virtual pc? Oh my. !!! Suena como virtual PC, pero al dreams

  the virtual pc (virtual machine, ese are known real number), is itself in los servidoresque tengan wont vSphere, to join ellas por medio a connection broker (Xendesktop es ellos uno, VMware View, vWorkspace, Leostream, etc.), y cada uno ellos used a mechanism para redireccionar meetings remotas, utilizando para ello protocolos access remote (ICA, RDP Microsoft etc.) , there is you can set una conexion desde una PC con standard Windows, Linux, Mac, etc. UN ligero (Windows, Linux, owner) client, even desde mobile phones!  ; Since even a simple navegador!

  Hear that el pc Al virtual requiere una PC powerful, me remember than muchos piensan en virtualizacion como algo 'lento', y viene experiences al using virtual PC (microsoft), o productos of VMware hosteados (workstation between ellos) pero con pocos recursos sober todo RAM.

  para ir al punto, South you can use VI3 o vSphere + broker for client connections Lebrun (the marca are lo menos, pero hay some are optimizados para VDI)

  Como punto final, already mucho el conocimiento del distribuidor, even TR Echado're not partners of Citrix y Québec no recomiende XenDesktop?

  Saludos

  Jose Ruelas B

  http://aservir.WordPress.com

• VWorkspace Reporting and licensing

  Hello

  I'm trying to find out how many people have connected to VDI over a certain period. It comes to the current report. Manager, it will use to determine how many licenses we need and what is the use (Sessions, licenses). For the moment, I know people are connected, but I don't know how to put together the date.

  Another question is if I go to the Management Console > license file I see 0 In Use licenses even though people are connected. Is this supposed to show the use of the current license?

  Hello Dejan,

  I suggest to study further why it shows 0 licenses and has nothing to do with M & D. M & d works correctly, you farm should behave properly first. You receive error popups when you access licenses screen? 0 sessions/licenses may indicate a malfunction of the broker for connections. For starters, you can check if the quest Connection Broker, database management and the registry services are running. Broker listed in the GPMC vWorkspace, rentals, location 1, list of connection brokers?