Change a c-series module

Similar Questions

• Can I create a task that includes the 2 c series modules?

  I am trying to create a single task that includes 2 modules of the series C OR - 9425, but when I wire the constant "Mod3/port0, Mod4/port0" physical channel in the DAQmx create Virtual Channel.vi I get error-200086 which indicates the syntax range physical channel in the input string is not valid because several devices have been included in the chain.  It is my understanding of LabView help this multidevice tasks are allowed.  Also according to article KB http://digital.ni.com/public.nsf/allkb/CF85114C6025C84C862571C000722DDA devices multiple tasks are supported for devices of the series S, series C and DSA devices, and according to this article KB http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument I formatted my constant of physical channel correctly.

  Please can someone explain why I get this error when all indications are that this should be a simple thing to do?

  My C Series modules are in slots 3 and 4 in a chassis cDAQ-9188, I'm currently under LabView 8.5.1, with Windows XP

  Thank you

  Eric

  Hi Eric,.

  I am afraid that you cannot configure the hardware timing with the module 9425 in CompactDAQ. The NI 9425 data sheet explains: «the NI 9425 is a static digital module, so you can use it to perform only call by the software or static operations when installed in a chassis NI CompactDAQ.»

  For I, AO and countertops, daisy chaining multiple calls to DAQmx create channel equivalent to specifying a list of physical channels, but it's different for DIO. Only one virtual channel DIO can contain several physical channels (lines). It would be quite reasonable to assume that by specifying a list of lines 'with a single channel for all lines"would cause DAQmx put all the lines in a single virtual channel, but see how it is implemented under DAQmx, is not possible when the lines are on multiple devices. Also, it would be reasonable to assume that if DAQmx could not put all the lines in a single virtual channel, it would create a virtual ring road, but that is not how it is implemented-, it returns the error you received.

  Instead, here are two approaches to all 64 lines in a single task. Either we have to work.

  Approach: create a single task, containing two virtual channels (MyChan0 and MyChan1). MyChan0 contains cDAQ1Mod3/port0 / line0:31 and MyChan1 contains cDAQ1Mod4/port0 / line0:31. Digital 2D Bool NChan 1Samp read VI returns a 2 x 32 table of Boolean. To flatten it into an array of 64 elements D 1, you must use the table to reshape or some other method.

  

  The task of DAQmx > ownership of channels is here to show that there are two virtual channels named MyChan0 and MyChan1. Also, I used a loop for to show that you don't have to encode multiple calls to DAQmx Create Channel. The constant "a channel for all lines" is redundant because it is the default value.

  B approach: create a single task, containing 64 virtual channels (MyChan0 through MyChan63). This example uses the constant 'a channel for each line', which is not the default. MyChan0 contains port0/cDAQ1Mod3/$line0, MyChan1 contains cDAQ1Mod3/port0/line1, etc.. Digital 1 d 1Samp Bool NChan read VI returns an array of 64 D 1 of Boolean elements. If you have used the Digital 2D Bool NChan 1Samp VI instead, you would get a 64 x 1 matrix, there are 64 virtual channels with 1 line of each.

  

  Brad

• Nexus F2e series modules

  Can someone tell me what is the difference between F2 and new F2e?  All I can find is supportive effect. Isn't it?

  The biggest complaint (and Gotcha) when people bought the N7K-F248XP-25 (aka standard F2) is an inability of the online map to work with F1 and M1/M2 card.  The F2 has be in it's own little VDC.   No member of Cisco would have admitted that it was due to a technical fault (or disaster).

  Thus the F2e is born.  Whatever the standard F2 can do, the F2e can do as well.  And the F2e can work with M1/M2.  "And when that happens (as indicated on the data sheet)" when you deploy the Module Cisco Nexus 7000 F2e-series fiber has VCC with the Cisco Nexus 7000 M Series modules, the Nexus 7000 F2e - series Cisco Fiber Module will run in mode Layer 2 only, delegating all capabilities of layer 3 for the Cisco Nexus 7000 M-modules of the series present in the VDC. The initial version of the software does not support this feature. »

  The F2e comes in two "forms": 1/10BaseTx 48-ports or SFP / SFP +.

  As the "F2", the F2e still won't be able to support the OTV (integrating F2 series Modules in a Cisco Nexus 7000 Series System).

  Due to the release of the new map of F2e expect Cisco to announce (within 6 months) at the end of sale of the standard map of F2.  (My own opinion, read below for refutation of the management team Cisco Nexus 7000 Production.)

  I don't know what Cisco will do to customers who bought the standard F2 by mistake.  Cisco quietly will allow them to trade or swap for F2e?  Only people (like Jerry) in Cisco will know.

  Post edited by: Leo Laohoo

• Can I change in the book module in LR without or invest new layouts?

  Hello

  can I change in the book module in LR without page layouts or invest the new?

  Behind her, I always look for the possibility of transforming the text. I would like to be able to read the text on the back of the book from the bottom to the top and no reverse, as shown.

  Thanks a lot for your help

  Just a stupid crazy thought - could work with limits.

  Use "Hard Cover / dust jacket" (images print on the cover with this option? Anyone know?)

  Rotate images 180degrees. (Text would need to be incorporated into the image)

  Remove and replace the cover "upside-down".

  

• How can I change the key series for win xp (Photoshop elements 11)

  I am owner of a serial for Mac key, I remove it from my Mac and I need to install in laptop with Win Xp, how I can change the key series for win xp in Photoshop elements 11

  You have dvd set that has windows and mac DVD or downloaded PES 11 for your mac?

  If you have downloaded it, you PES 11 Adobe or Apple?

  In General, if you have the box set that includes windows and mac installers, then the same serial number works for mac and windows.

  If a purchased download mac specific PES 11 RPF, series only works for mac and no windows.

  Given that PES 11 is no longer sold by adobe, I don't think you can cross grade to get a windows serial.

• I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

  I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

  The difference between the raw edition photo and editing a PSD is that the PSD has black points and white pinned to the visible pixel values, the raw photo has still "headroom" with values of pixel darker than black visible and brighter than white, so when you export the raw file , there may be details that have improved (or obscured if it was another type of image) of the perception and mapping of the Compensation of the black spot on the final color profile.

  This means not PS is better or LR is lower, it is enough for you to go to a different type of image.  If you don't have PS to do final Assembly, you can probably do the same thing by exporting the raw in a 16 bit ProPhotoRGB TIF file, re-import this TIF and then set it LR, possibly using the tone curve to make the pitch black dark areas.

• How can I change the default output module in After Effects CS6?

  How can I change the default output module in After Effects CS6? At the moment it is .avi and I do not want to change it to .mov whenever I start a new project. (Windows 8)

  Change--> output Module settings.  being enawed by the beauty and the usefulenss of this Panel...

  Mylenium

• Selection/change colors in series without closing/reopening of color palette

  I use Keynote much more and it drives me crazy that I can't change the colors in series without closing and reopening of the color palette. I'm doing something wrong?

  I'm not sure I understand your question.

  Are you eager to select ONLY the area that looks like a grid?

  It is often easier to use the color window that appears if you click on next to the more limited color box (or show colors in the View Menu), as this remains open. You can "restrict" the choice of colors using areas under the opacity slider with the colors you want to use in your current document. Colors often have to be dragged out of the biggest square next to the pipette.

  This window remains open until you close.

• HP 248 G1: How to change number of seri on bios

  My laptop is hp G1.i 248 again bios file copy Rom 25Q128Bvs.but when you're done, it comes very slow and the loss of information on the number of seri, produce key...

  I try to change the number of seri, but it can't boot from usb boot with single boot of the dowry boot.it usb boot win 8.

  How can I do?

  Please tell me.thanks you all!

  Hi @black0hackers,.

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  You can reset the BIOS with this document by selecting the reload the default BIOS settings.

  Thank you.

• in a clear stamp series Module Touch Panel

  I use LabVIEW Touch Panel Module make an app on a touch device with Windows CE 5.0. Now, I want to use RS232 touch panel devices to read and write. I use Serial compatibility VIs.It is useful, but it does not offer how to clear buffer rs232, as empty a buffer of e/s in visa. I want to get your help, tell me how clear the rs232 buffer, use that VIs.or how to change Serial compatibility screws for this function. Thank you my dear friend.

  What buffer you want to erase?  Transmit or receive?

  Usually transmit didn't need compensation because anything in it usually gets sent immediately.  I rarely need to clear the receive buffer.  But an easy way to delete it just to read all the bytes in there and just nothing to do with the data.

• all changes made in the module development in lr5 lost

  I lost all the changes I made in the develop module. Most of these photos where stacked with the copy on the top of the jpeg.  Then, I picked the ones I liked and make changes to them in the develop module. Then I changed them to DNG. It was more than two weeks ago, and I think that I tried to put them in a collection. Now all I see is original as they appear on the day, they are imported.

  Yes, it seems that you have two catalogs and imported into both.

  I suggest strongly that see you some video tutorials on AdobeTV before entering a tangle.

  http://TV.Adobe.com/product/Lightroom/

  and look here also: http://forums.adobe.com/community/lightroom/lightroom_for_beginners?view=discussions

• How can I change the skin existing module (RH9)?

  I have RH9. I have inherited a project. The skin for a module (Radiant) does not match the skin to the other modules in the project (for example hospital help).

  

  I tried to change the skin, but it made no difference. I then copied the! SkinSubFolder! Hospital to Radiant. It made no difference.

  I don't know what to do to make them match.

  Any help is greatly appreciated.

  Vicki

  Take a look at the video below the link for an example of what I expect to see.

  Click here to see

  See you soon... Rick

• Lightroom 4: cannot change to slide show Module - Get error has occurred when attempting to change the module

  I have a new MacMini (2 months) with OSX 10.8.2 and 16 GB of ram. I had a partial re - installed, bringing more of my settings from my old computer (a MacBook Pro, 10.8.2)

  4.3 Lightroom worked very well until I went to use the slideshow module.  I received an error message and the library module does not open.  Read the message "an error has occurred when attempting to change modules.

  What can I do to fix this?

  Here's what I've done so far:

  1. checekd the disk permissions and disk status - all ok
  2. check the integrity of my catalogs and saved them - all ok
  3. moved files preferably, ending with 'plist' from the root and user libraries - no change
  4. only moved to the folder of the user, to support / library/application - no change
  5. Checked and opened upward "privileges" on the files for the library files and the catalog files.  Checked 'apply to all files' - no change
  6. contacted one and Nik to see if they had heard of this problem - no, they didn't and don't think their programs could be the cause of this problem
  7. Contact Adobe - level 1 support - crossed some of the points above - no effect

  I am waiting for a call from level 2 return to Adobe.  In the meantime, one has this problem or have any other suggestions.  The only alternative I have is to completely uninstall Lr and start again.  But it's a bit drastic.

  Thank you

  This is a bug, usually related to having a second monitor attached.

  Roll to 4.2 from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5487 - simply drag 4.3 to the trash, and run this installer.

• Satellite A100-311 changed PA-number / series & VirtualSound prob. after repair

  Hello
  My SATELLITE A100-311/PSAA9E-11L047GR has been in a repair under warranty by a Toshiba service partner.
  They said they changed the motherboard. The reason is, there not the Bios boot (5.20), which is actually on the Board, too.
  My problem is that I want to update the driver VirtualSound, but the installation routine fails with the message that my Toshiba laptop does not support no matter what VirtualSound. He was even preinstalled, as I bought...
  If I was going to check the type of systemboard that they have installed. I used the Toshiba tool that shows any kind of material, driver etc. that exist.
  I did as the nr PSAA9E-11L047GR expected. is now a PSB10U-SA10ES1. Also the serial number is like a standard: "12345678901234567" and not my actual serial number. If I go to look for any driver, bios, or h.e. on basis of this rating, of course it is not properly entered.
  I have contact service engineer and he assures me that they replaced the Board with the same kind of room and wrote good "DMI" (?) on the new Board of Directors. His response was that I need to run the recovery procedure, but I do not believe that this will change anything.

  My questions are:
  That is, the system shows me such a serial number and the number of PA?
  I trust the service engineer the label under the laptop beyond important for me, for example. by making updates?
  And why is the message that my Toshiba laptop does not support any VirtualSound?

  Thanks for the help!

  Post edited by: fouben

  Hello

  DMI information is stored on the system board and the DMI string contains, among other things, the model number of the system.
  If the number is wrong and does not correspond with the recovery CD then you will not be able to install the recovery CD.

  So I advise to use your old recovery CD. If this will not work, you can contact ASP guys and tell them about this problem

• CAN the c series modules and drivers XNET and Ethernet expansion chassis cRIO compatibility issues

  Hello

  I encountered a problem with my current setup which was not picked up by the tool advise cRIO or by the engineer of applications OR that we used to check our configuration before starting the project.  It turns out that the NI 9853 CAN modules require a XNET driver that is not compatible with the NI 9149 expansion chassis.

  We currently have a system with a cRIO NI 9068 with general IO and some CAN controller and CAN open modules in a carrycot and an Ethernet NI9149 with more general IO expansion chassis and more CAN and CAN open an another pod remote modules and all of this should work under water, so I can not move the modules of the expansion chassis to the chassis controller without a lot of overhaul of the system and equip and a team of angry engineers and technicians.

  I have developed the FPGA code for the 9068 OR and have CAN and CAN open networks works with happiness.  Then I tried to copy the same FPGA code on the expansion chassis and it compiles, but when I try to launch it I get the error-63184 code.  After long calls OR support, and tries to install the missing drivers on the expansion chassis, we discovered that XNET is not compatible with this chassis.

  Can anyone suggest the best course of action?  Is there an expansion chassis Ethernet that will support XNET?  I have here no information online about this compatibility issue that I can't find?

  I'll be communication with DIRECTLY, but from previous experience of the "odd" questions, I know the community often hold the key.  Any suggestions gratefully received.

  Thank you, Ed

  It's official.  CAN open modules are not compatible with the expansion chassis.  I have them moved to RIO and will get the upgraded pods.

  Thank you

  Ed