program damaged by using the secondary account

Similar Questions

• I cannot acess my main profile and you must use the guest account

  I cannot acess my main profile and you must use the guest account

  Hello

  There may be several error messages and/or other conditions however these methods
  should help you regain access.

  If you suspect any malware, a system restore is an option:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------------------------------------------------------------------

  Other methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Cannot access the internet using the account invited in Vista. Unable to access using the administrator account.

  This one is strange - and I repeat that the problem is that I can't access the internet by using the administrator account.  The guest account works fine.  All programs are there and launch the fine (IE, Live Messenger, Yahoo Messenger, etc.), but they cling right there when I try to log on or access to any Web site.

  While in the administrator account, I ran "CMD" in the run menu and can ping Yahoo, Google, etc. with success.  It's embarrassing - any ideas how the administrator account can act that way then the guest account works perfectly?

  Hello Allen LaBrune,.

  If you are able to ping the websites from the command prompt, it means that your computer connectivity is fine.

  ·         What is the antivirus installed on your computer protection software?

  ·         Have you tried to browse by disabling the firewall?

  Try disabling the firewall on the computer and check if you are able to navigate.

  If this does not work, reset Internet Explorer settings and check if you can browse.

  To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

  1. exit all programs, including Internet Explorer (if it is running). 2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER: Inetcpl.cpl The Internet Options dialog box appears. 3. click on the Advanced tab. 4. Under Reset Internet Explorer settings, click Reset. Then click again on reset. 5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog. 6. restart Internet Explorer. For you reference, you can visit the link for the following Article: http://support.Microsoft.com/kb/923737

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I uninstall a computer and reinstall to a new computer using the same account?

  How can I uninstall a computer and reinstall to a new computer using the same account?

  Hello

  For uninstallation, please use the uninstall program: CC help | Uninstall the creative desktop application Cloud

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• Clicking on a mailto: link using the wrong account to send an e-mail. Is it possible to designate a default account?

  I have several accounts that I use in thunderbird. Everything works fine and I have no problem at all. But when I am on the web and click on a "mailto:" link on a Web site, Thunderbird always opens the new e-mail window using the first account in the "stack". I never use this account to send mail... I want to use another account but cannot figure out how twell TB that is.

  At the top e-mail account is the default e-mail account.

  Tools > accounts settings
  or
  Right-click on the name of the e-mail account, and then select "settings".

  Select the desired default mail account name.
  Click on "Account Actions" to get the drop down options
  Click on "Set as default"
  Click OK to save the changes.

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• Impossible to scan: "another program or computer using the HP imaging device.

  Original title: hp scanning problem

  I can't seem to find anything on the hp site regarding my being not scan with the center of Solution because that 'another program or computer use the HP imaging device ".  I have my Officejet 6500 connected via an ethernet cable in my Linksys routeras is my internet modem.  Someone has an idea?  I can print fine; I can't scanner to work other than the program with the paint.  Thank you for coming so someone can help out me.  -Steve M

  Hello

  I suggest you to visit the following links: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Networked-C6280-and-Windows-7-64-bit/td-p/217282

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Windows-7-Professional-and-HP-printer-software/TD-p/224258

  I hope this information is useful.

• Trunk / normal boot - access denied message: may have to open a session using the admin account to make specified changes

  I went into safe mode to try to resolve a problem that is "slow". When I tried to goback to normal startup, I got an access denied message. "... May have to login using the admin account to make specified changes." I am the only user of the computer and administer and logged as soon as I turn on count it. What can I do now?

  Is this the message you see:

  "An access denied error was returned while attempting to change a service. You may need to log on using an administrator account to perform the changes specified"

  If so, I bet you have a HP printer, because there is an HP PML driver that produces this effect of nuisance. It is only a nuisance and you should still be able to make your changes of msconfig, and they should stick. However, if she is really bugging you, you can watch this:

  http://www.pchell.com/support/msconfig_access_denied_error.shtml

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Schedule a task by using the service account

  To schedule tasks by using the service account and he could be executed in more than one PC. Please suggest and provide some example or screenshot.

  Hi Ravikumar,
   
  Thanks for posting your question in the Microsoft Community Forum.
   
  Based on the information, you find out to schedule tasks by using the service account and to run in multiple PCs.
  It would be useful that you can answer the question to help you further.
  Your system is connected to a domain?
   
  If your system is connected to the domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows 7
  Let us know if you need help with Windows related issues. We will be happy to help you.

• HP Officejet scan cannot be run, error "Scan cannot be performed because another program or computer uses the network device.

  Hello everyone,

  After you have installed Windows 8 on my desk, I lost the ability to scan with HP (Officejet 8500 pro wireless) solutions Center. Wen I click on scan (rather photo or document) I get a message: "Scan cannot be performed because another program or computer uses the network device. There is a little information on the HP site. I've tried all the suggested solutions, including several install and reinstall the HP software. The printing part works very well, and I can scan with other programs directly using the WIA driver. Now I scan documents to pdf authorizing searches, who wants me that this question be set quite often. Currently, I use my laptop for that. Everything works very well with Windows 7.

  Any help would be appreciated.

  Thanks, Johann

  I contacted HP about this specific problem.  They informed me that it is an upgrade of Windows 8 that Twain issue and they do not support this problem.  Reinstall the current drivers of hp does not help.

• Can I enroll in two Windows 8 computers using the same account at the same time?

  I just bought another laptop Windows 8 and want to set up using my Microsoft account, can I use the same account on both computers at the same time, or do I have to sign up an account?

  Hi Disuhall,

  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you want to know if you can register in two other computer using the same account existing Microsoft at a time in your operating system to Windows 8.

  I'll be happy to help you.

  You can register in both computers using the same account to Microsoft and you have to sign on the account to be used in another computer.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Using the SYS account

  Dear all,

  My database is Oracle 10 g on Windows platform.

  Due to certain requirements (DBAs) checks must use our accounts indivisual instead of SYS.

  I want to confirm if I assign SYSDBA, s/n, RESOURCES, CONNECT to a user it will get all the privileges that the SYS user have? I think I will be fine.

  The second condition is now, if I get all the privileges in my own account who is saying "IMRAN" than will be using the SYS account. It can be disabled?

  Thank you and best regards.

  SYS cannot be disabled.  Cannot delete SYSDBA privilege.  Any person who is granted the SYSDBA privilege and made a connection with "AS SYSDBA" actually connects under the SYS, not his named account account.

  Therefore,.

  a: I would not grant SYSDBA to named users

  b. I would lock in a safe accessible only by a manager the "oracle" account (and any other account in the OSDBA group)

  c. ask the DBA using the DBA role (or a custom, more restrictive role)

  d. to request the account 'oracle' only for STARTUP, SHUTDOWN, RESTORE/RECOVERY and patch.  (assuming backups are automated scripted jobs)

  Hemant K Collette

• Determine the IP address of local login using the root account

  How can I determine the IP address of a person who connects to an ESXi host using the root account? (I don't know if the connection was via ssh or vSphere Client)

  Hello

  connects him with the address IP can be found here:

  SSH: /var/log/auch.log

  vSphere Client: /var/log/hostd.log

  Concerning

  Tim

• I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I shouldn't

  I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I wouldn't reinstall anything, right?

  Hi Greg,.

  You won't lose any application on the computer.

  You can remove a user from the license and assign it to another user according to the help below document:

  Using creative cloud | Manage your creative cloud to the membership of the teams

  Kind regards

  Sheena